<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="19">
<package pkgid="6ad9521f46a8816f5c9ff4fde4397c8b9a942bae21bc6818393bbc9bd4fdf235" name="SAPHanaSR" arch="noarch">
  <version epoch="0" ver="0.162.5" rel="2.1"/>
  <changelog author="imanyugin@suse.com" date="1496404800">- Fix bsc#1042154: Scoring race condition between SAPHanaTopology and SAPHana</changelog>
  <changelog author="imanyugin@suse.com" date="1499342400">- Fix bsc#1045606: update man pages</changelog>
  <changelog author="imanyugin@suse.com" date="1508760000">- Fix bsc#1062267: SAPHanaSR wizard sets IPAddr2 agent's NIC to eth0</changelog>
  <changelog author="imanyugin@suse.com" date="1511179200">- FATE#323526: adjust HAWK2 Wizards to run on both Python 2 and 3</changelog>
  <changelog author="ro@suse.de" date="1517400000">- remove duplicate BuildArch line from specfile</changelog>
  <changelog author="imanyugin@suse.com" date="1526644800">- Version bump to 0.152.22
- Fix bsc#1091074:
    + Adjust Perl scripts to Perl 5.26.0
    + Remove show_SAPHanaSR_attributes
    + The user is advised to use SAPHanaSR-showAttr instead
- SAPHanaTopology: stricter match for system replication 'mode' in awk</changelog>
  <changelog author="abriel@suse.com" date="1567166400">- Version bump to 0.153.2
- rescore the master and fix some log string literals
- Fix bsc#1133866:
  Return $OCF_RUNNING_MASTER (8) instead of $OCF_SUCCESS (0) when
  probing a promoted node.
- If the SAP HANA CALL to 'landscapeHostConfiguration.py' is
  running into a timeout, do a retry of the command. If it still
  fails with a timeout, raise an error but do not set attributes
  to prevent unlogged failovers because of empty or unknown
  attributes.
  (bsc#1134106, bsc#1133024, bsc#1101373)
- Fix bsc#1082974:
  set attribute for remoteNode
- Fix bsc#1139715:
  Using crm-attributes written by a SAP HANA SR provider hook does
  improve the data integrity in special error conditions with
  multiple errors coming in a short time frame.
  Stabilized remote-site detection; SAPHana could now use a site
  specific SR cluster attribute which could be set by a SAP HA/DR
  provider call.
  Add a HA/DR provider hook script, config implementation and man
  page.
  Add parameter "HANA_CALL_TIMEOUT" to the RA configuration
  (SAPHanaTopology and SAPHanaSR) to set a timeout for HANA calls
  like landscapeHostConfiguration.py.
  Implemented "reload" method to allow changing parameters like
  "AUTOMATED_REGISTER"
  Set SWAIT during startup, but only if the attribute is already set
  Set PRIM after promote, but only if the attribute is already set
  The promote function has to set the return code according to the
  checks of the takeover result
  New tool SAPHanaSR-replay-archive, SAPHanaSR-filter and
  SAPHanaSR-showAttr to support SITE attributes</changelog>
  <changelog author="abriel@suse.com" date="1568203200">- fix typo in a condition statement (bnc#1149829)</changelog>
  <changelog author="abriel@suse.com" date="1573214400">- Version bump to 0.153.3
- The SAPHana resource agent must not down-score a SAP HANA
  Database site, if the landscape status is still 2, which means
  warning.
  Keep high scoring during recovery of the master name server.
  Use a fall-back scoring for the master nameserver nodes, if the
  current roles of the node(s) got lost.
  (bsc#1156067)
- change the shebang line of the HAWK2 templates to python3
  (bsc#1155423)</changelog>
  <changelog author="abriel@suse.com" date="1573819200">- Version bump to 0.154.0
- restart sapstartsrv service on master nameserver node
  (bsc#1156150)</changelog>
  <changelog author="abriel@suse.com" date="1574337600">- restart sapstartsrv service on master nameserver node during
  monitor action, if needed. But NOT during probes.
  (bsc#1157453)</changelog>
  <changelog author="abriel@suse.com" date="1593691200">- Version bump to 0.154.1
- log empty site names, but do not generate bad formatted cluster
  attribute name
  (bsc#1173581)
- fix documentation of some parameter defaults
- adjust start/stop/promote/monitor action timeouts to match
  official recommendations</changelog>
  <changelog author="abriel@suse.com" date="1637668800">- Version bump to 0.155.0
- Add systemd support for the resource agent to interact with the
  new SAP unit files for sapstartsrv.
  As the new version of the SAP Startup Framework will use systemd
  unit files to control the sapstartsrv process instead of the
  previous used SysV init script, we need to adapt the handling of
  sapstartsrv inside the resource agents to support both ways.
  (bsc#1189530, bsc#1189531)
- The resource start and stop timeout is now configurable by
  increasing the timeout for the action 'start' and/or 'stop'.
  We will use 95% of this action timeouts to calculate the new
  resource start and stop timeout for the 'WaitforStarted' and
  'WaitforStopped' functions. If the new, calculated timeout value
  is less than '3600', it will be set to '3600', so that we do not
  decrease this timeout by accident
  (bsc#1182545)
- change promotion scoring during maintenance procedure to prevent
  that both sides have an equal promotion scoring after refresh
  which might result in a critical promotion of the secondary.
  (bsc#1174557)
- update of man page SAPHanaSR.py.7 - correct the supported HANA
  version.
  (bsc#1182201)
- if the $hdbState command fails to retrieve the current state of
  the System Replication, the resource agent now uses the
  system_replication/actual_mode attribute (if available) from the
  global.ini file as a fallback.
  This should prevent some confusing and misleading log messages
  during a takeover and solves the problem of a not working
  takeover back (after a successful first takeover)
  (bsc#1181765)
- add dedicated logging of HANA_CALL problems. So it will be now
  possible to identify, if the called hana command or the needed
  su command throws the error and for further hints we log the
  stderr output.
  Additional it is possible to get regular log messages for the
  used commands, their return code and their stderr output by
  enabling the 'debug' mode of the resource agents.
  (bsc#1182774)</changelog>
  <changelog author="abriel@suse.com" date="1654084800">- Version bump to 0.160.1
- fix HANA_CALL function to support MCOS environments again
  (bsc#1198780)
- fix SAPHanaSR-replay-archive to handle hb_report archives again
  (bsc#1198897)
- add HANA_CALL_TIMEOUT parameter back to the resource agents and
  read the setting from the cluster configuration, if available.
  Defaults to '60'.
  Related to github issue#36
- add new HA/DR provider hook susTkOver
  (jsc#SLE-16347)
- add new hook script for SAP HANA System Replication Scale-Up Cost
  Optimized Scenario.
  (jsc#SLE-18613)
- add a new instance parameter 'REMOVE_SAP_SOCKETS'.
  It is an optional parameter and defaults to 'true'. Now you can
  control, if the RA should remove the unix domain sockets related
  to sapstartsrv before (re-)start sapstartsrv or if it should try
  to adjust the permissions and ownership of these files instead.</changelog>
  <changelog author="abriel@suse.com" date="1661256000">- Version bump to 0.161.1_BF
- add the required 'xmllint' to the package
  (bsc#1201945)
- changes to the demote_clone function of the resource agent:
  if the role is '1:P' (topology agent run into timeouts) the
  function fail with rc=1, to get the managed resource stopped
  changes to the stop_clone function of the topology agent:
  call landscapeHostConfiguration.py and set the roles as they were
  reported. If the command timed out, set the role to '1:P' and
  return 1 to get the node fenced.
  The used timeout for the landscapeHostConfiguration.py call can
  be configured by the cluster action timeout, if needed. It will
  be 50% of the action timeout or the minimum of 300s.
  (bsc#1198127)
- add new HA/DR provider hook susChkSrv
  (jsc#PED-1241, jsc#PED-1240)
- add new tool SAPHanaSR-manageProvider to show, add and delete
  HA/DR provider sections in the global.ini of SAP HANA.
- update suse icon to new branding</changelog>
  <changelog author="varkoly@suse.com" date="1665057600">- SAPHanaSR-monitor not reporting correctly
  (bsc#1192963)
  add patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1669204800">- Version bump to 0.162.0
  * add improvements from SAP to the RA scripts regarding the
    handling of the SAP tools 'HDB version', 'HDBSettings.sh' and
    'pycd' and the SAPHana log filter handling
    (jsc#PED-1739, jsc#PED-2608)
  * fix for SAPHanaSR-monitor reporting "LPA status of one node is
    missing"
    (bsc#1192963, bsc#1203973)
  * SAPHanaSRTools.pm: shows terminate node attribute too
- remove patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1674561600">- Version bump to 0.162.1
  * fix for SAPHanaTopology failing with error code 1
    (OCF_ERR_GENERIC) during a normal stop action
    (bsc#1207466)
  * set srhook attribute to PRIM during a probe so that we do not
    need to wait for the first srConnectionChanged() to set the
    attribute
    (bsc#1205535)</changelog>
  <changelog author="abriel@suse.com" date="1698926400">- Version bump to 0.162.2
  * inside SAPHanaSR-hookHelper use the full path for the cibadmin
    command to support non root users in special user environments
    (bsc#1216484)
  * if the SAPHanaSR.py hook has successfully reported a SR event
    to the cluster a still existing fall-back state file will be
    removed to prevent an override of an already reported
    SR state.
    (bsc#1215693)
  * improve supportability by providing the current process ID of
    the RA, which is logged in the RA outputs, to HANA tracefiles
    too.
    This allows a mapping of the SAP related command invocations
    from the RA and the HANA executions which might have a delay
    in between.
    (bsc#1214613)
  * avoid explicid and implicid usage of /tmp filesystem to keep
    the SAPHanaSR resource agents working even in situations with
    /tmp filesystem full.
    (bsc#1210728)
  * update man pages:
    SAPHanaSR.7
    SAPHanaSR_basic_cluster.7
    SAPHanaSR_maintenance_examples.7
    ocf_suse_SAPHana.7
    ocf_suse_SAPHanaTopology.7
    susCostOpt.py.7
    SAPHanaSR-monitor.8
    SAPHanaSR-showAttr.8
  * add improvements from SAP to the RA scripts, part II
    (jsc#PED-1739, jsc#PED-2608)</changelog>
  <changelog author="abriel@suse.com" date="1706529600">- Version bump to 0.162.3
  * Fix the hexdump log for empty node states
  * catch monitor calls for non-cloned resources and report them as
    unsupported instead of 'command not found'
    (bsc#1218333)
  * fix scope of variable 'site' to be global
    (bsc#1219194)
  * susChkSrv.py - relocate function logTimestamp()
  * update man pages:
    SAPHanaSR.7
    ocf_suse_SAPHana.7
    SAPHanaSR_maintenance_examples.7
    SAPHanaSR.py.7
    SAPHanaSR-showAttr.8</changelog>
</package>
<package pkgid="78d69bd539e2086bdaf43f45a4b03fefc315fc3587d60c7bc96b397dc1fdf2c7" name="SAPHanaSR" arch="src">
  <version epoch="0" ver="0.162.5" rel="2.1"/>
  <changelog author="imanyugin@suse.com" date="1496404800">- Fix bsc#1042154: Scoring race condition between SAPHanaTopology and SAPHana</changelog>
  <changelog author="imanyugin@suse.com" date="1499342400">- Fix bsc#1045606: update man pages</changelog>
  <changelog author="imanyugin@suse.com" date="1508760000">- Fix bsc#1062267: SAPHanaSR wizard sets IPAddr2 agent's NIC to eth0</changelog>
  <changelog author="imanyugin@suse.com" date="1511179200">- FATE#323526: adjust HAWK2 Wizards to run on both Python 2 and 3</changelog>
  <changelog author="ro@suse.de" date="1517400000">- remove duplicate BuildArch line from specfile</changelog>
  <changelog author="imanyugin@suse.com" date="1526644800">- Version bump to 0.152.22
- Fix bsc#1091074:
    + Adjust Perl scripts to Perl 5.26.0
    + Remove show_SAPHanaSR_attributes
    + The user is advised to use SAPHanaSR-showAttr instead
- SAPHanaTopology: stricter match for system replication 'mode' in awk</changelog>
  <changelog author="abriel@suse.com" date="1567166400">- Version bump to 0.153.2
- rescore the master and fix some log string literals
- Fix bsc#1133866:
  Return $OCF_RUNNING_MASTER (8) instead of $OCF_SUCCESS (0) when
  probing a promoted node.
- If the SAP HANA CALL to 'landscapeHostConfiguration.py' is
  running into a timeout, do a retry of the command. If it still
  fails with a timeout, raise an error but do not set attributes
  to prevent unlogged failovers because of empty or unknown
  attributes.
  (bsc#1134106, bsc#1133024, bsc#1101373)
- Fix bsc#1082974:
  set attribute for remoteNode
- Fix bsc#1139715:
  Using crm-attributes written by a SAP HANA SR provider hook does
  improve the data integrity in special error conditions with
  multiple errors coming in a short time frame.
  Stabilized remote-site detection; SAPHana could now use a site
  specific SR cluster attribute which could be set by a SAP HA/DR
  provider call.
  Add a HA/DR provider hook script, config implementation and man
  page.
  Add parameter "HANA_CALL_TIMEOUT" to the RA configuration
  (SAPHanaTopology and SAPHanaSR) to set a timeout for HANA calls
  like landscapeHostConfiguration.py.
  Implemented "reload" method to allow changing parameters like
  "AUTOMATED_REGISTER"
  Set SWAIT during startup, but only if the attribute is already set
  Set PRIM after promote, but only if the attribute is already set
  The promote function has to set the return code according to the
  checks of the takeover result
  New tool SAPHanaSR-replay-archive, SAPHanaSR-filter and
  SAPHanaSR-showAttr to support SITE attributes</changelog>
  <changelog author="abriel@suse.com" date="1568203200">- fix typo in a condition statement (bnc#1149829)</changelog>
  <changelog author="abriel@suse.com" date="1573214400">- Version bump to 0.153.3
- The SAPHana resource agent must not down-score a SAP HANA
  Database site, if the landscape status is still 2, which means
  warning.
  Keep high scoring during recovery of the master name server.
  Use a fall-back scoring for the master nameserver nodes, if the
  current roles of the node(s) got lost.
  (bsc#1156067)
- change the shebang line of the HAWK2 templates to python3
  (bsc#1155423)</changelog>
  <changelog author="abriel@suse.com" date="1573819200">- Version bump to 0.154.0
- restart sapstartsrv service on master nameserver node
  (bsc#1156150)</changelog>
  <changelog author="abriel@suse.com" date="1574337600">- restart sapstartsrv service on master nameserver node during
  monitor action, if needed. But NOT during probes.
  (bsc#1157453)</changelog>
  <changelog author="abriel@suse.com" date="1593691200">- Version bump to 0.154.1
- log empty site names, but do not generate bad formatted cluster
  attribute name
  (bsc#1173581)
- fix documentation of some parameter defaults
- adjust start/stop/promote/monitor action timeouts to match
  official recommendations</changelog>
  <changelog author="abriel@suse.com" date="1637668800">- Version bump to 0.155.0
- Add systemd support for the resource agent to interact with the
  new SAP unit files for sapstartsrv.
  As the new version of the SAP Startup Framework will use systemd
  unit files to control the sapstartsrv process instead of the
  previous used SysV init script, we need to adapt the handling of
  sapstartsrv inside the resource agents to support both ways.
  (bsc#1189530, bsc#1189531)
- The resource start and stop timeout is now configurable by
  increasing the timeout for the action 'start' and/or 'stop'.
  We will use 95% of this action timeouts to calculate the new
  resource start and stop timeout for the 'WaitforStarted' and
  'WaitforStopped' functions. If the new, calculated timeout value
  is less than '3600', it will be set to '3600', so that we do not
  decrease this timeout by accident
  (bsc#1182545)
- change promotion scoring during maintenance procedure to prevent
  that both sides have an equal promotion scoring after refresh
  which might result in a critical promotion of the secondary.
  (bsc#1174557)
- update of man page SAPHanaSR.py.7 - correct the supported HANA
  version.
  (bsc#1182201)
- if the $hdbState command fails to retrieve the current state of
  the System Replication, the resource agent now uses the
  system_replication/actual_mode attribute (if available) from the
  global.ini file as a fallback.
  This should prevent some confusing and misleading log messages
  during a takeover and solves the problem of a not working
  takeover back (after a successful first takeover)
  (bsc#1181765)
- add dedicated logging of HANA_CALL problems. So it will be now
  possible to identify, if the called hana command or the needed
  su command throws the error and for further hints we log the
  stderr output.
  Additional it is possible to get regular log messages for the
  used commands, their return code and their stderr output by
  enabling the 'debug' mode of the resource agents.
  (bsc#1182774)</changelog>
  <changelog author="abriel@suse.com" date="1654084800">- Version bump to 0.160.1
- fix HANA_CALL function to support MCOS environments again
  (bsc#1198780)
- fix SAPHanaSR-replay-archive to handle hb_report archives again
  (bsc#1198897)
- add HANA_CALL_TIMEOUT parameter back to the resource agents and
  read the setting from the cluster configuration, if available.
  Defaults to '60'.
  Related to github issue#36
- add new HA/DR provider hook susTkOver
  (jsc#SLE-16347)
- add new hook script for SAP HANA System Replication Scale-Up Cost
  Optimized Scenario.
  (jsc#SLE-18613)
- add a new instance parameter 'REMOVE_SAP_SOCKETS'.
  It is an optional parameter and defaults to 'true'. Now you can
  control, if the RA should remove the unix domain sockets related
  to sapstartsrv before (re-)start sapstartsrv or if it should try
  to adjust the permissions and ownership of these files instead.</changelog>
  <changelog author="abriel@suse.com" date="1661256000">- Version bump to 0.161.1_BF
- add the required 'xmllint' to the package
  (bsc#1201945)
- changes to the demote_clone function of the resource agent:
  if the role is '1:P' (topology agent run into timeouts) the
  function fail with rc=1, to get the managed resource stopped
  changes to the stop_clone function of the topology agent:
  call landscapeHostConfiguration.py and set the roles as they were
  reported. If the command timed out, set the role to '1:P' and
  return 1 to get the node fenced.
  The used timeout for the landscapeHostConfiguration.py call can
  be configured by the cluster action timeout, if needed. It will
  be 50% of the action timeout or the minimum of 300s.
  (bsc#1198127)
- add new HA/DR provider hook susChkSrv
  (jsc#PED-1241, jsc#PED-1240)
- add new tool SAPHanaSR-manageProvider to show, add and delete
  HA/DR provider sections in the global.ini of SAP HANA.
- update suse icon to new branding</changelog>
  <changelog author="varkoly@suse.com" date="1665057600">- SAPHanaSR-monitor not reporting correctly
  (bsc#1192963)
  add patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1669204800">- Version bump to 0.162.0
  * add improvements from SAP to the RA scripts regarding the
    handling of the SAP tools 'HDB version', 'HDBSettings.sh' and
    'pycd' and the SAPHana log filter handling
    (jsc#PED-1739, jsc#PED-2608)
  * fix for SAPHanaSR-monitor reporting "LPA status of one node is
    missing"
    (bsc#1192963, bsc#1203973)
  * SAPHanaSRTools.pm: shows terminate node attribute too
- remove patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1674561600">- Version bump to 0.162.1
  * fix for SAPHanaTopology failing with error code 1
    (OCF_ERR_GENERIC) during a normal stop action
    (bsc#1207466)
  * set srhook attribute to PRIM during a probe so that we do not
    need to wait for the first srConnectionChanged() to set the
    attribute
    (bsc#1205535)</changelog>
  <changelog author="abriel@suse.com" date="1698926400">- Version bump to 0.162.2
  * inside SAPHanaSR-hookHelper use the full path for the cibadmin
    command to support non root users in special user environments
    (bsc#1216484)
  * if the SAPHanaSR.py hook has successfully reported a SR event
    to the cluster a still existing fall-back state file will be
    removed to prevent an override of an already reported
    SR state.
    (bsc#1215693)
  * improve supportability by providing the current process ID of
    the RA, which is logged in the RA outputs, to HANA tracefiles
    too.
    This allows a mapping of the SAP related command invocations
    from the RA and the HANA executions which might have a delay
    in between.
    (bsc#1214613)
  * avoid explicid and implicid usage of /tmp filesystem to keep
    the SAPHanaSR resource agents working even in situations with
    /tmp filesystem full.
    (bsc#1210728)
  * update man pages:
    SAPHanaSR.7
    SAPHanaSR_basic_cluster.7
    SAPHanaSR_maintenance_examples.7
    ocf_suse_SAPHana.7
    ocf_suse_SAPHanaTopology.7
    susCostOpt.py.7
    SAPHanaSR-monitor.8
    SAPHanaSR-showAttr.8
  * add improvements from SAP to the RA scripts, part II
    (jsc#PED-1739, jsc#PED-2608)</changelog>
  <changelog author="abriel@suse.com" date="1706529600">- Version bump to 0.162.3
  * Fix the hexdump log for empty node states
  * catch monitor calls for non-cloned resources and report them as
    unsupported instead of 'command not found'
    (bsc#1218333)
  * fix scope of variable 'site' to be global
    (bsc#1219194)
  * susChkSrv.py - relocate function logTimestamp()
  * update man pages:
    SAPHanaSR.7
    ocf_suse_SAPHana.7
    SAPHanaSR_maintenance_examples.7
    SAPHanaSR.py.7
    SAPHanaSR-showAttr.8</changelog>
</package>
<package pkgid="467b2afa171defce8a0ccdce6e5f15a5e9a087e0badc1bc4aa3c3be976805804" name="SAPHanaSR-angi" arch="noarch">
  <version epoch="0" ver="1.2.3" rel="2.1"/>
  <changelog author="imanyugin@suse.com" date="1508760000">- Fix bsc#1062267: SAPHanaSR wizard sets IPAddr2 agent's NIC to eth0</changelog>
  <changelog author="imanyugin@suse.com" date="1511179200">- FATE#323526: adjust HAWK2 Wizards to run on both Python 2 and 3</changelog>
  <changelog author="ro@suse.de" date="1517400000">- remove duplicate BuildArch line from specfile</changelog>
  <changelog author="imanyugin@suse.com" date="1526644800">- Version bump to 0.152.22
- Fix bsc#1091074:
    + Adjust Perl scripts to Perl 5.26.0
    + Remove show_SAPHanaSR_attributes
    + The user is advised to use SAPHanaSR-showAttr instead
- SAPHanaTopology: stricter match for system replication 'mode' in awk</changelog>
  <changelog author="abriel@suse.com" date="1567166400">- Version bump to 0.153.2
- rescore the master and fix some log string literals
- Fix bsc#1133866:
  Return $OCF_RUNNING_MASTER (8) instead of $OCF_SUCCESS (0) when
  probing a promoted node.
- If the SAP HANA CALL to 'landscapeHostConfiguration.py' is
  running into a timeout, do a retry of the command. If it still
  fails with a timeout, raise an error but do not set attributes
  to prevent unlogged failovers because of empty or unknown
  attributes.
  (bsc#1134106, bsc#1133024, bsc#1101373)
- Fix bsc#1082974:
  set attribute for remoteNode
- Fix bsc#1139715:
  Using crm-attributes written by a SAP HANA SR provider hook does
  improve the data integrity in special error conditions with
  multiple errors coming in a short time frame.
  Stabilized remote-site detection; SAPHana could now use a site
  specific SR cluster attribute which could be set by a SAP HA/DR
  provider call.
  Add a HA/DR provider hook script, config implementation and man
  page.
  Add parameter "HANA_CALL_TIMEOUT" to the RA configuration
  (SAPHanaTopology and SAPHanaSR) to set a timeout for HANA calls
  like landscapeHostConfiguration.py.
  Implemented "reload" method to allow changing parameters like
  "AUTOMATED_REGISTER"
  Set SWAIT during startup, but only if the attribute is already set
  Set PRIM after promote, but only if the attribute is already set
  The promote function has to set the return code according to the
  checks of the takeover result
  New tool SAPHanaSR-replay-archive, SAPHanaSR-filter and
  SAPHanaSR-showAttr to support SITE attributes</changelog>
  <changelog author="abriel@suse.com" date="1568203200">- fix typo in a condition statement (bnc#1149829)</changelog>
  <changelog author="abriel@suse.com" date="1573214400">- Version bump to 0.153.3
- The SAPHana resource agent must not down-score a SAP HANA
  Database site, if the landscape status is still 2, which means
  warning.
  Keep high scoring during recovery of the master name server.
  Use a fall-back scoring for the master nameserver nodes, if the
  current roles of the node(s) got lost.
  (bsc#1156067)
- change the shebang line of the HAWK2 templates to python3
  (bsc#1155423)</changelog>
  <changelog author="abriel@suse.com" date="1573819200">- Version bump to 0.154.0
- restart sapstartsrv service on master nameserver node
  (bsc#1156150)</changelog>
  <changelog author="abriel@suse.com" date="1574337600">- restart sapstartsrv service on master nameserver node during
  monitor action, if needed. But NOT during probes.
  (bsc#1157453)</changelog>
  <changelog author="abriel@suse.com" date="1593691200">- Version bump to 0.154.1
- log empty site names, but do not generate bad formatted cluster
  attribute name
  (bsc#1173581)
- fix documentation of some parameter defaults
- adjust start/stop/promote/monitor action timeouts to match
  official recommendations</changelog>
  <changelog author="abriel@suse.com" date="1637668800">- Version bump to 0.155.0
- Add systemd support for the resource agent to interact with the
  new SAP unit files for sapstartsrv.
  As the new version of the SAP Startup Framework will use systemd
  unit files to control the sapstartsrv process instead of the
  previous used SysV init script, we need to adapt the handling of
  sapstartsrv inside the resource agents to support both ways.
  (bsc#1189530, bsc#1189531)
- The resource start and stop timeout is now configurable by
  increasing the timeout for the action 'start' and/or 'stop'.
  We will use 95% of this action timeouts to calculate the new
  resource start and stop timeout for the 'WaitforStarted' and
  'WaitforStopped' functions. If the new, calculated timeout value
  is less than '3600', it will be set to '3600', so that we do not
  decrease this timeout by accident
  (bsc#1182545)
- change promotion scoring during maintenance procedure to prevent
  that both sides have an equal promotion scoring after refresh
  which might result in a critical promotion of the secondary.
  (bsc#1174557)
- update of man page SAPHanaSR.py.7 - correct the supported HANA
  version.
  (bsc#1182201)
- if the $hdbState command fails to retrieve the current state of
  the System Replication, the resource agent now uses the
  system_replication/actual_mode attribute (if available) from the
  global.ini file as a fallback.
  This should prevent some confusing and misleading log messages
  during a takeover and solves the problem of a not working
  takeover back (after a successful first takeover)
  (bsc#1181765)
- add dedicated logging of HANA_CALL problems. So it will be now
  possible to identify, if the called hana command or the needed
  su command throws the error and for further hints we log the
  stderr output.
  Additional it is possible to get regular log messages for the
  used commands, their return code and their stderr output by
  enabling the 'debug' mode of the resource agents.
  (bsc#1182774)</changelog>
  <changelog author="abriel@suse.com" date="1654084800">- Version bump to 0.160.1
- fix HANA_CALL function to support MCOS environments again
  (bsc#1198780)
- fix SAPHanaSR-replay-archive to handle hb_report archives again
  (bsc#1198897)
- add HANA_CALL_TIMEOUT parameter back to the resource agents and
  read the setting from the cluster configuration, if available.
  Defaults to '60'.
  Related to github issue#36
- add new HA/DR provider hook susTkOver
  (jsc#SLE-16347)
- add new hook script for SAP HANA System Replication Scale-Up Cost
  Optimized Scenario.
  (jsc#SLE-18613)
- add a new instance parameter 'REMOVE_SAP_SOCKETS'.
  It is an optional parameter and defaults to 'true'. Now you can
  control, if the RA should remove the unix domain sockets related
  to sapstartsrv before (re-)start sapstartsrv or if it should try
  to adjust the permissions and ownership of these files instead.</changelog>
  <changelog author="abriel@suse.com" date="1661256000">- Version bump to 0.161.1_BF
- add the required 'xmllint' to the package
  (bsc#1201945)
- changes to the demote_clone function of the resource agent:
  if the role is '1:P' (topology agent run into timeouts) the
  function fail with rc=1, to get the managed resource stopped
  changes to the stop_clone function of the topology agent:
  call landscapeHostConfiguration.py and set the roles as they were
  reported. If the command timed out, set the role to '1:P' and
  return 1 to get the node fenced.
  The used timeout for the landscapeHostConfiguration.py call can
  be configured by the cluster action timeout, if needed. It will
  be 50% of the action timeout or the minimum of 300s.
  (bsc#1198127)
- add new HA/DR provider hook susChkSrv
  (jsc#PED-1241, jsc#PED-1240)
- add new tool SAPHanaSR-manageProvider to show, add and delete
  HA/DR provider sections in the global.ini of SAP HANA.
- update suse icon to new branding</changelog>
  <changelog author="varkoly@suse.com" date="1665057600">- SAPHanaSR-monitor not reporting correctly
  (bsc#1192963)
  add patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1669204800">- Version bump to 0.162.0
  * add improvements from SAP to the RA scripts regarding the
    handling of the SAP tools 'HDB version', 'HDBSettings.sh' and
    'pycd' and the SAPHana log filter handling
    (jsc#PED-1739, jsc#PED-2608)
  * fix for SAPHanaSR-monitor reporting "LPA status of one node is
    missing"
    (bsc#1192963, bsc#1203973)
  * SAPHanaSRTools.pm: shows terminate node attribute too
- remove patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1674561600">- Version bump to 0.162.1
  * fix for SAPHanaTopology failing with error code 1
    (OCF_ERR_GENERIC) during a normal stop action
    (bsc#1207466)
  * set srhook attribute to PRIM during a probe so that we do not
    need to wait for the first srConnectionChanged() to set the
    attribute
    (bsc#1205535)</changelog>
  <changelog author="abriel@suse.com" date="1681732800">- New package name and new version 1.001.4
  * New package SAPHanaSR-angi
    SAP HANA System Replication - A New Generation Interface
    (jsc#PED-3876)
  * support SAPHana ScaleUp and ScaleOut environments with one
    set of resource agents
- conflicting with the 'old' packages SAPHanaSR and
  SAPHanaSR-ScaleOut
- old changelog entries preserved for history reasons as
  SAPHanaSR-angi is based on all these changes.</changelog>
  <changelog author="abriel@suse.com" date="1688558400">- Version bump to 1.001.5
  * package is still in status 'technical preview'
  * add support for SAPHana ScaleOut environments without standby
    nodes
  * starting to rewrite SAPHanaSR tools from bash to python.
    SAPHanaSR-showAttr and SAPHanaSR-replay-archive
    The name of the tools is not changed by this action, but there
    are some improvements in functionality. See the man pages for
    details.
    The tools SAPHanaSR-monitor and SAPHanaSR-filter are deprecated.
    The classic version of these tools is still shipped in the
    package side-by-side to the rewritten and more powerful
    tools in /usr/bin. Their name is suffixed by '-legacy'.
    The classic version of the tools is deprecated and will be
    removed in a later package update.</changelog>
  <changelog author="fabian.herschel@suse.com" date="1691496000">- Version bump to 1.2.0
  * SAPHanaFilesystem RA added (poc status)</changelog>
  <changelog author="abriel@suse.com" date="1699012800">- Version bump to 1.2.2
  * package is still in status 'technical preview'
  * SAPHanaFilesystem RA has still POC status
  * add parameter 'ON_FAIL_ACTION' to SAPHanaFilesystem RA (POC)
  * improve the usage of SAP virtual hostnames
  * if the susHanaSR.py hook has successfully reported a SR event
    to the cluster a still existing fall-back state file will be
    removed to prevent an override of an already reported
    SR state.
    (bsc#1215693)
  * improve supportability by providing the current process ID of
    the RA, which is logged in the RA outputs, to HANA tracefiles
    too.
    This allows a mapping of the SAP related command invocations
    from the RA and the HANA executions which might have a delay
    in between.
    (bsc#1214613)
  * avoid explicid and implicid usage of /tmp filesystem to keep
    the SAPHanaSR resource agents working even in situations with
    /tmp filesystem full.
    (bsc#1210728)
  * update man pages:
    SAPHanaSR.7
    SAPHanaSR-ScaleOut.7
    SAPHanaSR_basic_cluster.7
    SAPHanaSR-ScaleOut_basic_cluster.7
    SAPHanaSR_maintenance_examples.7
    ocf_suse_SAPHana.7
    ocf_suse_SAPHanaController.7
    ocf_suse_SAPHanaTopology.7
    ocf_suse_SAPHanaFilesystem.7
    susChkSrv.py.7
    SAPHanaSR-showAttr.8</changelog>
</package>
<package pkgid="0915c93fb9222a57617bbe247a85d8077e81ecf57e4ddbd95e2152c0463f22fa" name="SAPHanaSR-angi" arch="src">
  <version epoch="0" ver="1.2.3" rel="2.1"/>
  <changelog author="imanyugin@suse.com" date="1508760000">- Fix bsc#1062267: SAPHanaSR wizard sets IPAddr2 agent's NIC to eth0</changelog>
  <changelog author="imanyugin@suse.com" date="1511179200">- FATE#323526: adjust HAWK2 Wizards to run on both Python 2 and 3</changelog>
  <changelog author="ro@suse.de" date="1517400000">- remove duplicate BuildArch line from specfile</changelog>
  <changelog author="imanyugin@suse.com" date="1526644800">- Version bump to 0.152.22
- Fix bsc#1091074:
    + Adjust Perl scripts to Perl 5.26.0
    + Remove show_SAPHanaSR_attributes
    + The user is advised to use SAPHanaSR-showAttr instead
- SAPHanaTopology: stricter match for system replication 'mode' in awk</changelog>
  <changelog author="abriel@suse.com" date="1567166400">- Version bump to 0.153.2
- rescore the master and fix some log string literals
- Fix bsc#1133866:
  Return $OCF_RUNNING_MASTER (8) instead of $OCF_SUCCESS (0) when
  probing a promoted node.
- If the SAP HANA CALL to 'landscapeHostConfiguration.py' is
  running into a timeout, do a retry of the command. If it still
  fails with a timeout, raise an error but do not set attributes
  to prevent unlogged failovers because of empty or unknown
  attributes.
  (bsc#1134106, bsc#1133024, bsc#1101373)
- Fix bsc#1082974:
  set attribute for remoteNode
- Fix bsc#1139715:
  Using crm-attributes written by a SAP HANA SR provider hook does
  improve the data integrity in special error conditions with
  multiple errors coming in a short time frame.
  Stabilized remote-site detection; SAPHana could now use a site
  specific SR cluster attribute which could be set by a SAP HA/DR
  provider call.
  Add a HA/DR provider hook script, config implementation and man
  page.
  Add parameter "HANA_CALL_TIMEOUT" to the RA configuration
  (SAPHanaTopology and SAPHanaSR) to set a timeout for HANA calls
  like landscapeHostConfiguration.py.
  Implemented "reload" method to allow changing parameters like
  "AUTOMATED_REGISTER"
  Set SWAIT during startup, but only if the attribute is already set
  Set PRIM after promote, but only if the attribute is already set
  The promote function has to set the return code according to the
  checks of the takeover result
  New tool SAPHanaSR-replay-archive, SAPHanaSR-filter and
  SAPHanaSR-showAttr to support SITE attributes</changelog>
  <changelog author="abriel@suse.com" date="1568203200">- fix typo in a condition statement (bnc#1149829)</changelog>
  <changelog author="abriel@suse.com" date="1573214400">- Version bump to 0.153.3
- The SAPHana resource agent must not down-score a SAP HANA
  Database site, if the landscape status is still 2, which means
  warning.
  Keep high scoring during recovery of the master name server.
  Use a fall-back scoring for the master nameserver nodes, if the
  current roles of the node(s) got lost.
  (bsc#1156067)
- change the shebang line of the HAWK2 templates to python3
  (bsc#1155423)</changelog>
  <changelog author="abriel@suse.com" date="1573819200">- Version bump to 0.154.0
- restart sapstartsrv service on master nameserver node
  (bsc#1156150)</changelog>
  <changelog author="abriel@suse.com" date="1574337600">- restart sapstartsrv service on master nameserver node during
  monitor action, if needed. But NOT during probes.
  (bsc#1157453)</changelog>
  <changelog author="abriel@suse.com" date="1593691200">- Version bump to 0.154.1
- log empty site names, but do not generate bad formatted cluster
  attribute name
  (bsc#1173581)
- fix documentation of some parameter defaults
- adjust start/stop/promote/monitor action timeouts to match
  official recommendations</changelog>
  <changelog author="abriel@suse.com" date="1637668800">- Version bump to 0.155.0
- Add systemd support for the resource agent to interact with the
  new SAP unit files for sapstartsrv.
  As the new version of the SAP Startup Framework will use systemd
  unit files to control the sapstartsrv process instead of the
  previous used SysV init script, we need to adapt the handling of
  sapstartsrv inside the resource agents to support both ways.
  (bsc#1189530, bsc#1189531)
- The resource start and stop timeout is now configurable by
  increasing the timeout for the action 'start' and/or 'stop'.
  We will use 95% of this action timeouts to calculate the new
  resource start and stop timeout for the 'WaitforStarted' and
  'WaitforStopped' functions. If the new, calculated timeout value
  is less than '3600', it will be set to '3600', so that we do not
  decrease this timeout by accident
  (bsc#1182545)
- change promotion scoring during maintenance procedure to prevent
  that both sides have an equal promotion scoring after refresh
  which might result in a critical promotion of the secondary.
  (bsc#1174557)
- update of man page SAPHanaSR.py.7 - correct the supported HANA
  version.
  (bsc#1182201)
- if the $hdbState command fails to retrieve the current state of
  the System Replication, the resource agent now uses the
  system_replication/actual_mode attribute (if available) from the
  global.ini file as a fallback.
  This should prevent some confusing and misleading log messages
  during a takeover and solves the problem of a not working
  takeover back (after a successful first takeover)
  (bsc#1181765)
- add dedicated logging of HANA_CALL problems. So it will be now
  possible to identify, if the called hana command or the needed
  su command throws the error and for further hints we log the
  stderr output.
  Additional it is possible to get regular log messages for the
  used commands, their return code and their stderr output by
  enabling the 'debug' mode of the resource agents.
  (bsc#1182774)</changelog>
  <changelog author="abriel@suse.com" date="1654084800">- Version bump to 0.160.1
- fix HANA_CALL function to support MCOS environments again
  (bsc#1198780)
- fix SAPHanaSR-replay-archive to handle hb_report archives again
  (bsc#1198897)
- add HANA_CALL_TIMEOUT parameter back to the resource agents and
  read the setting from the cluster configuration, if available.
  Defaults to '60'.
  Related to github issue#36
- add new HA/DR provider hook susTkOver
  (jsc#SLE-16347)
- add new hook script for SAP HANA System Replication Scale-Up Cost
  Optimized Scenario.
  (jsc#SLE-18613)
- add a new instance parameter 'REMOVE_SAP_SOCKETS'.
  It is an optional parameter and defaults to 'true'. Now you can
  control, if the RA should remove the unix domain sockets related
  to sapstartsrv before (re-)start sapstartsrv or if it should try
  to adjust the permissions and ownership of these files instead.</changelog>
  <changelog author="abriel@suse.com" date="1661256000">- Version bump to 0.161.1_BF
- add the required 'xmllint' to the package
  (bsc#1201945)
- changes to the demote_clone function of the resource agent:
  if the role is '1:P' (topology agent run into timeouts) the
  function fail with rc=1, to get the managed resource stopped
  changes to the stop_clone function of the topology agent:
  call landscapeHostConfiguration.py and set the roles as they were
  reported. If the command timed out, set the role to '1:P' and
  return 1 to get the node fenced.
  The used timeout for the landscapeHostConfiguration.py call can
  be configured by the cluster action timeout, if needed. It will
  be 50% of the action timeout or the minimum of 300s.
  (bsc#1198127)
- add new HA/DR provider hook susChkSrv
  (jsc#PED-1241, jsc#PED-1240)
- add new tool SAPHanaSR-manageProvider to show, add and delete
  HA/DR provider sections in the global.ini of SAP HANA.
- update suse icon to new branding</changelog>
  <changelog author="varkoly@suse.com" date="1665057600">- SAPHanaSR-monitor not reporting correctly
  (bsc#1192963)
  add patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1669204800">- Version bump to 0.162.0
  * add improvements from SAP to the RA scripts regarding the
    handling of the SAP tools 'HDB version', 'HDBSettings.sh' and
    'pycd' and the SAPHana log filter handling
    (jsc#PED-1739, jsc#PED-2608)
  * fix for SAPHanaSR-monitor reporting "LPA status of one node is
    missing"
    (bsc#1192963, bsc#1203973)
  * SAPHanaSRTools.pm: shows terminate node attribute too
- remove patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1674561600">- Version bump to 0.162.1
  * fix for SAPHanaTopology failing with error code 1
    (OCF_ERR_GENERIC) during a normal stop action
    (bsc#1207466)
  * set srhook attribute to PRIM during a probe so that we do not
    need to wait for the first srConnectionChanged() to set the
    attribute
    (bsc#1205535)</changelog>
  <changelog author="abriel@suse.com" date="1681732800">- New package name and new version 1.001.4
  * New package SAPHanaSR-angi
    SAP HANA System Replication - A New Generation Interface
    (jsc#PED-3876)
  * support SAPHana ScaleUp and ScaleOut environments with one
    set of resource agents
- conflicting with the 'old' packages SAPHanaSR and
  SAPHanaSR-ScaleOut
- old changelog entries preserved for history reasons as
  SAPHanaSR-angi is based on all these changes.</changelog>
  <changelog author="abriel@suse.com" date="1688558400">- Version bump to 1.001.5
  * package is still in status 'technical preview'
  * add support for SAPHana ScaleOut environments without standby
    nodes
  * starting to rewrite SAPHanaSR tools from bash to python.
    SAPHanaSR-showAttr and SAPHanaSR-replay-archive
    The name of the tools is not changed by this action, but there
    are some improvements in functionality. See the man pages for
    details.
    The tools SAPHanaSR-monitor and SAPHanaSR-filter are deprecated.
    The classic version of these tools is still shipped in the
    package side-by-side to the rewritten and more powerful
    tools in /usr/bin. Their name is suffixed by '-legacy'.
    The classic version of the tools is deprecated and will be
    removed in a later package update.</changelog>
  <changelog author="fabian.herschel@suse.com" date="1691496000">- Version bump to 1.2.0
  * SAPHanaFilesystem RA added (poc status)</changelog>
  <changelog author="abriel@suse.com" date="1699012800">- Version bump to 1.2.2
  * package is still in status 'technical preview'
  * SAPHanaFilesystem RA has still POC status
  * add parameter 'ON_FAIL_ACTION' to SAPHanaFilesystem RA (POC)
  * improve the usage of SAP virtual hostnames
  * if the susHanaSR.py hook has successfully reported a SR event
    to the cluster a still existing fall-back state file will be
    removed to prevent an override of an already reported
    SR state.
    (bsc#1215693)
  * improve supportability by providing the current process ID of
    the RA, which is logged in the RA outputs, to HANA tracefiles
    too.
    This allows a mapping of the SAP related command invocations
    from the RA and the HANA executions which might have a delay
    in between.
    (bsc#1214613)
  * avoid explicid and implicid usage of /tmp filesystem to keep
    the SAPHanaSR resource agents working even in situations with
    /tmp filesystem full.
    (bsc#1210728)
  * update man pages:
    SAPHanaSR.7
    SAPHanaSR-ScaleOut.7
    SAPHanaSR_basic_cluster.7
    SAPHanaSR-ScaleOut_basic_cluster.7
    SAPHanaSR_maintenance_examples.7
    ocf_suse_SAPHana.7
    ocf_suse_SAPHanaController.7
    ocf_suse_SAPHanaTopology.7
    ocf_suse_SAPHanaFilesystem.7
    susChkSrv.py.7
    SAPHanaSR-showAttr.8</changelog>
</package>
<package pkgid="243151725a4f8cd69c74d797ed83bc1615155fc9dc6b7f2f7b0e2dc9ae2fe854" name="SAPHanaSR-doc" arch="noarch">
  <version epoch="0" ver="0.162.5" rel="2.1"/>
  <changelog author="imanyugin@suse.com" date="1496404800">- Fix bsc#1042154: Scoring race condition between SAPHanaTopology and SAPHana</changelog>
  <changelog author="imanyugin@suse.com" date="1499342400">- Fix bsc#1045606: update man pages</changelog>
  <changelog author="imanyugin@suse.com" date="1508760000">- Fix bsc#1062267: SAPHanaSR wizard sets IPAddr2 agent's NIC to eth0</changelog>
  <changelog author="imanyugin@suse.com" date="1511179200">- FATE#323526: adjust HAWK2 Wizards to run on both Python 2 and 3</changelog>
  <changelog author="ro@suse.de" date="1517400000">- remove duplicate BuildArch line from specfile</changelog>
  <changelog author="imanyugin@suse.com" date="1526644800">- Version bump to 0.152.22
- Fix bsc#1091074:
    + Adjust Perl scripts to Perl 5.26.0
    + Remove show_SAPHanaSR_attributes
    + The user is advised to use SAPHanaSR-showAttr instead
- SAPHanaTopology: stricter match for system replication 'mode' in awk</changelog>
  <changelog author="abriel@suse.com" date="1567166400">- Version bump to 0.153.2
- rescore the master and fix some log string literals
- Fix bsc#1133866:
  Return $OCF_RUNNING_MASTER (8) instead of $OCF_SUCCESS (0) when
  probing a promoted node.
- If the SAP HANA CALL to 'landscapeHostConfiguration.py' is
  running into a timeout, do a retry of the command. If it still
  fails with a timeout, raise an error but do not set attributes
  to prevent unlogged failovers because of empty or unknown
  attributes.
  (bsc#1134106, bsc#1133024, bsc#1101373)
- Fix bsc#1082974:
  set attribute for remoteNode
- Fix bsc#1139715:
  Using crm-attributes written by a SAP HANA SR provider hook does
  improve the data integrity in special error conditions with
  multiple errors coming in a short time frame.
  Stabilized remote-site detection; SAPHana could now use a site
  specific SR cluster attribute which could be set by a SAP HA/DR
  provider call.
  Add a HA/DR provider hook script, config implementation and man
  page.
  Add parameter "HANA_CALL_TIMEOUT" to the RA configuration
  (SAPHanaTopology and SAPHanaSR) to set a timeout for HANA calls
  like landscapeHostConfiguration.py.
  Implemented "reload" method to allow changing parameters like
  "AUTOMATED_REGISTER"
  Set SWAIT during startup, but only if the attribute is already set
  Set PRIM after promote, but only if the attribute is already set
  The promote function has to set the return code according to the
  checks of the takeover result
  New tool SAPHanaSR-replay-archive, SAPHanaSR-filter and
  SAPHanaSR-showAttr to support SITE attributes</changelog>
  <changelog author="abriel@suse.com" date="1568203200">- fix typo in a condition statement (bnc#1149829)</changelog>
  <changelog author="abriel@suse.com" date="1573214400">- Version bump to 0.153.3
- The SAPHana resource agent must not down-score a SAP HANA
  Database site, if the landscape status is still 2, which means
  warning.
  Keep high scoring during recovery of the master name server.
  Use a fall-back scoring for the master nameserver nodes, if the
  current roles of the node(s) got lost.
  (bsc#1156067)
- change the shebang line of the HAWK2 templates to python3
  (bsc#1155423)</changelog>
  <changelog author="abriel@suse.com" date="1573819200">- Version bump to 0.154.0
- restart sapstartsrv service on master nameserver node
  (bsc#1156150)</changelog>
  <changelog author="abriel@suse.com" date="1574337600">- restart sapstartsrv service on master nameserver node during
  monitor action, if needed. But NOT during probes.
  (bsc#1157453)</changelog>
  <changelog author="abriel@suse.com" date="1593691200">- Version bump to 0.154.1
- log empty site names, but do not generate bad formatted cluster
  attribute name
  (bsc#1173581)
- fix documentation of some parameter defaults
- adjust start/stop/promote/monitor action timeouts to match
  official recommendations</changelog>
  <changelog author="abriel@suse.com" date="1637668800">- Version bump to 0.155.0
- Add systemd support for the resource agent to interact with the
  new SAP unit files for sapstartsrv.
  As the new version of the SAP Startup Framework will use systemd
  unit files to control the sapstartsrv process instead of the
  previous used SysV init script, we need to adapt the handling of
  sapstartsrv inside the resource agents to support both ways.
  (bsc#1189530, bsc#1189531)
- The resource start and stop timeout is now configurable by
  increasing the timeout for the action 'start' and/or 'stop'.
  We will use 95% of this action timeouts to calculate the new
  resource start and stop timeout for the 'WaitforStarted' and
  'WaitforStopped' functions. If the new, calculated timeout value
  is less than '3600', it will be set to '3600', so that we do not
  decrease this timeout by accident
  (bsc#1182545)
- change promotion scoring during maintenance procedure to prevent
  that both sides have an equal promotion scoring after refresh
  which might result in a critical promotion of the secondary.
  (bsc#1174557)
- update of man page SAPHanaSR.py.7 - correct the supported HANA
  version.
  (bsc#1182201)
- if the $hdbState command fails to retrieve the current state of
  the System Replication, the resource agent now uses the
  system_replication/actual_mode attribute (if available) from the
  global.ini file as a fallback.
  This should prevent some confusing and misleading log messages
  during a takeover and solves the problem of a not working
  takeover back (after a successful first takeover)
  (bsc#1181765)
- add dedicated logging of HANA_CALL problems. So it will be now
  possible to identify, if the called hana command or the needed
  su command throws the error and for further hints we log the
  stderr output.
  Additional it is possible to get regular log messages for the
  used commands, their return code and their stderr output by
  enabling the 'debug' mode of the resource agents.
  (bsc#1182774)</changelog>
  <changelog author="abriel@suse.com" date="1654084800">- Version bump to 0.160.1
- fix HANA_CALL function to support MCOS environments again
  (bsc#1198780)
- fix SAPHanaSR-replay-archive to handle hb_report archives again
  (bsc#1198897)
- add HANA_CALL_TIMEOUT parameter back to the resource agents and
  read the setting from the cluster configuration, if available.
  Defaults to '60'.
  Related to github issue#36
- add new HA/DR provider hook susTkOver
  (jsc#SLE-16347)
- add new hook script for SAP HANA System Replication Scale-Up Cost
  Optimized Scenario.
  (jsc#SLE-18613)
- add a new instance parameter 'REMOVE_SAP_SOCKETS'.
  It is an optional parameter and defaults to 'true'. Now you can
  control, if the RA should remove the unix domain sockets related
  to sapstartsrv before (re-)start sapstartsrv or if it should try
  to adjust the permissions and ownership of these files instead.</changelog>
  <changelog author="abriel@suse.com" date="1661256000">- Version bump to 0.161.1_BF
- add the required 'xmllint' to the package
  (bsc#1201945)
- changes to the demote_clone function of the resource agent:
  if the role is '1:P' (topology agent run into timeouts) the
  function fail with rc=1, to get the managed resource stopped
  changes to the stop_clone function of the topology agent:
  call landscapeHostConfiguration.py and set the roles as they were
  reported. If the command timed out, set the role to '1:P' and
  return 1 to get the node fenced.
  The used timeout for the landscapeHostConfiguration.py call can
  be configured by the cluster action timeout, if needed. It will
  be 50% of the action timeout or the minimum of 300s.
  (bsc#1198127)
- add new HA/DR provider hook susChkSrv
  (jsc#PED-1241, jsc#PED-1240)
- add new tool SAPHanaSR-manageProvider to show, add and delete
  HA/DR provider sections in the global.ini of SAP HANA.
- update suse icon to new branding</changelog>
  <changelog author="varkoly@suse.com" date="1665057600">- SAPHanaSR-monitor not reporting correctly
  (bsc#1192963)
  add patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1669204800">- Version bump to 0.162.0
  * add improvements from SAP to the RA scripts regarding the
    handling of the SAP tools 'HDB version', 'HDBSettings.sh' and
    'pycd' and the SAPHana log filter handling
    (jsc#PED-1739, jsc#PED-2608)
  * fix for SAPHanaSR-monitor reporting "LPA status of one node is
    missing"
    (bsc#1192963, bsc#1203973)
  * SAPHanaSRTools.pm: shows terminate node attribute too
- remove patch:
    0001-bsc-1192963.patch</changelog>
  <changelog author="abriel@suse.com" date="1674561600">- Version bump to 0.162.1
  * fix for SAPHanaTopology failing with error code 1
    (OCF_ERR_GENERIC) during a normal stop action
    (bsc#1207466)
  * set srhook attribute to PRIM during a probe so that we do not
    need to wait for the first srConnectionChanged() to set the
    attribute
    (bsc#1205535)</changelog>
  <changelog author="abriel@suse.com" date="1698926400">- Version bump to 0.162.2
  * inside SAPHanaSR-hookHelper use the full path for the cibadmin
    command to support non root users in special user environments
    (bsc#1216484)
  * if the SAPHanaSR.py hook has successfully reported a SR event
    to the cluster a still existing fall-back state file will be
    removed to prevent an override of an already reported
    SR state.
    (bsc#1215693)
  * improve supportability by providing the current process ID of
    the RA, which is logged in the RA outputs, to HANA tracefiles
    too.
    This allows a mapping of the SAP related command invocations
    from the RA and the HANA executions which might have a delay
    in between.
    (bsc#1214613)
  * avoid explicid and implicid usage of /tmp filesystem to keep
    the SAPHanaSR resource agents working even in situations with
    /tmp filesystem full.
    (bsc#1210728)
  * update man pages:
    SAPHanaSR.7
    SAPHanaSR_basic_cluster.7
    SAPHanaSR_maintenance_examples.7
    ocf_suse_SAPHana.7
    ocf_suse_SAPHanaTopology.7
    susCostOpt.py.7
    SAPHanaSR-monitor.8
    SAPHanaSR-showAttr.8
  * add improvements from SAP to the RA scripts, part II
    (jsc#PED-1739, jsc#PED-2608)</changelog>
  <changelog author="abriel@suse.com" date="1706529600">- Version bump to 0.162.3
  * Fix the hexdump log for empty node states
  * catch monitor calls for non-cloned resources and report them as
    unsupported instead of 'command not found'
    (bsc#1218333)
  * fix scope of variable 'site' to be global
    (bsc#1219194)
  * susChkSrv.py - relocate function logTimestamp()
  * update man pages:
    SAPHanaSR.7
    ocf_suse_SAPHana.7
    SAPHanaSR_maintenance_examples.7
    SAPHanaSR.py.7
    SAPHanaSR-showAttr.8</changelog>
</package>
<package pkgid="70878b32a8356d49df20f9c88127bfaa60eeb5f83a79488abc0bed4c31440382" name="SAPHanaSR-tester" arch="noarch">
  <version epoch="0" ver="1.2.2" rel="1.1"/>
</package>
<package pkgid="f421e6c27f44661ed035737b66a71275ba6555cf8c3c4735af1b0df0a6731189" name="SAPHanaSR-tester" arch="src">
  <version epoch="0" ver="1.2.2" rel="1.1"/>
</package>
<package pkgid="3d006df2c70cba2d99b042731c0578c93846cba022e94a91cd21689004b034c8" name="ctris" arch="src">
  <version epoch="0" ver="0.42" rel="8.1"/>
  <changelog author="cwh@suse.de" date="1141041600">- initial release</changelog>
</package>
<package pkgid="cff1c8e894bb620c4667c8acb1e32d5cc784a0e9fcf37199480ea8051c572008" name="ctris" arch="x86_64">
  <version epoch="0" ver="0.42" rel="8.1"/>
  <changelog author="cwh@suse.de" date="1141041600">- initial release</changelog>
</package>
<package pkgid="78c3025303cb4880aced746208e67765edb9c8c8954620b96e5c7b3a505ce6fa" name="iperf2" arch="src">
  <version epoch="0" ver="2.2.0.rc" rel="8.1"/>
</package>
<package pkgid="020cf7a3b0f63ae41876436857d89cbaa1305269f18741b65d001ae4980eb171" name="iperf2" arch="x86_64">
  <version epoch="0" ver="2.2.0.rc" rel="8.1"/>
</package>
<package pkgid="6a093b330f340c3d25f170176a4f0dbf26d4c7be32a8cf636501d9f64222af66" name="ncc_reset" arch="noarch">
  <version epoch="0" ver="0.3" rel="3.1"/>
  <changelog author="fabian.herschel@suse.com" date="1308312000">0.1-1 initial package version</changelog>
  <changelog author="fabian.herschel@suse.com" date="1308571200">0.2-1 added ssh_reset to reset ssh host keys also</changelog>
  <changelog author="fabian.herschel@suse.com" date="1334664000">BZ 757529 - ncc_reset
  0.3-1 new package version</changelog>
</package>
<package pkgid="cddbce9fad66a18912c7492f6b01ddcf15f4b8553c9cfcbc8cd353bff7c77355" name="ncc_reset" arch="src">
  <version epoch="0" ver="0.3" rel="3.1"/>
  <changelog author="fabian.herschel@suse.com" date="1308312000">0.1-1 initial package version</changelog>
  <changelog author="fabian.herschel@suse.com" date="1308571200">0.2-1 added ssh_reset to reset ssh host keys also</changelog>
  <changelog author="fabian.herschel@suse.com" date="1334664000">BZ 757529 - ncc_reset
  0.3-1 new package version</changelog>
</package>
<package pkgid="524ef703b939656da696ca1353de1276d133660a653a62e51c6a66da9c13c4d1" name="nonsense" arch="src">
  <version epoch="0" ver="0.2" rel="3.1"/>
</package>
<package pkgid="21eb61a4b7d389664da6f4d3f61159d5a3d77dc8d561b613fe7494dff7762467" name="nonsense" arch="x86_64">
  <version epoch="0" ver="0.2" rel="3.1"/>
</package>
<package pkgid="9d45353164f22c59555f8de76bac08316da7c1cedd2d14b4a4e56dbeb1e6fc63" name="sapstartsrv-resource-agents" arch="noarch">
  <version epoch="0" ver="0.9.0" rel="3.1"/>
  <changelog author="xarbulu@suse.com" date="1600257600">- Include python version to the resource agent</changelog>
  <changelog author="fabian.herschel@suse.com" date="1607083200">- Add sapservices-move script</changelog>
</package>
<package pkgid="71ae9bb6a2247bf71db4321787a8ebfec82764e17ffbc5b7cc4a2b93151a0fea" name="sapstartsrv-resource-agents" arch="src">
  <version epoch="0" ver="0.9.0" rel="3.1"/>
  <changelog author="xarbulu@suse.com" date="1600257600">- Include python version to the resource agent</changelog>
  <changelog author="fabian.herschel@suse.com" date="1607083200">- Add sapservices-move script</changelog>
</package>
<package pkgid="7e8d755fdde3295bbf826bd18e7d7e0a2ed6313120be14d8a82d3c0d96596963" name="wow" arch="noarch">
  <version epoch="0" ver="0.6.1" rel="6.1"/>
  <changelog author="fabian.herschel@novell.com" date="1228392000">0.2.0-2 support wow configurations (--config)
  moved functions from wowrc to /usr/lib/wow/wowlib</changelog>
  <changelog author="fabian.herschel@novell.com" date="1229083200">0.3.0-2 new master CLI: whbcc (Wow HeartBeat ClusterChange)
  agents moved to /usr/lib/wow
  flexible group naming 
  new config sample
  documented sample</changelog>
  <changelog author="fabian.herschel@novell.com" date="1231416000">0.3.1-3 fix for different sfex index resources
  the resources are now named rsc_sfex_MM_NN_SID so sfex index=1 and sfex index=2 are
  different resource names
  fixed misssing doc files</changelog>
  <changelog author="fabian.herschel@novell.com" date="1231848000">0.4.0-1 added snipsets and agents for xen/ocfs2</changelog>
  <changelog author="fabian.herschel@novell.com" date="1233662400">0.4.2-4 add rlio definition and agent
  0.4.1-1 add edir xml and agent (draft!!)</changelog>
  <changelog author="fabian.herschel@novell.com" date="1240920000">0.5.0-1 now could also configure other database types than ORA
  Use  DBTYPE=ADA to configure a MaxDB instance
  Error in agent 01-A-06-group_add_fs fixed (error was FSTYPE not defined)</changelog>
  <changelog author="fabian.herschel@novell.com" date="1241092800">0.5.1-1 new sap sample added 
  new sap xml templates to support the strings "CI" and "ASCS" as instance type
  the (valid) types "DS" and "SCS" are a bit missleading
  so for now you could use one of "ASCS", "SCS", "DS" or "CI" as instance-type</changelog>
  <changelog author="fabian.herschel@novell.com" date="1255089600">0.5.2-1 fixed problem with here document in SAP-Instance agent</changelog>
  <changelog author="fabian.herschel@novell.com" date="1255089601">0.6.0-1 sap constraints splitted</changelog>
  <changelog author="fabian.herschel@novell.com" date="1257768000">0.6.1-3 SAP ERS support started 
  - stonith meatware
  - 01-masterslave_appl_sapinstance_SCSERS
  - db2/db6 template added
  - make wow ready for build.opensuse.org</changelog>
</package>
<package pkgid="1834905e6f22c5f978e26a453e65a63b1e728767f06957a0d79675d5e294d18a" name="wow" arch="src">
  <version epoch="0" ver="0.6.1" rel="6.1"/>
  <changelog author="fabian.herschel@novell.com" date="1224504000">0.1.0 initial package version</changelog>
  <changelog author="fabian.herschel@novell.com" date="1224849600">License file (COPYING)</changelog>
  <changelog author="fabian.herschel@novell.com" date="1228392000">0.2.0-2 support wow configurations (--config)
  moved functions from wowrc to /usr/lib/wow/wowlib</changelog>
  <changelog author="fabian.herschel@novell.com" date="1229083200">0.3.0-2 new master CLI: whbcc (Wow HeartBeat ClusterChange)
  agents moved to /usr/lib/wow
  flexible group naming 
  new config sample
  documented sample</changelog>
  <changelog author="fabian.herschel@novell.com" date="1231416000">0.3.1-3 fix for different sfex index resources
  the resources are now named rsc_sfex_MM_NN_SID so sfex index=1 and sfex index=2 are
  different resource names
  fixed misssing doc files</changelog>
  <changelog author="fabian.herschel@novell.com" date="1231848000">0.4.0-1 added snipsets and agents for xen/ocfs2</changelog>
  <changelog author="fabian.herschel@novell.com" date="1233662400">0.4.2-4 add rlio definition and agent
  0.4.1-1 add edir xml and agent (draft!!)</changelog>
  <changelog author="fabian.herschel@novell.com" date="1240920000">0.5.0-1 now could also configure other database types than ORA
  Use  DBTYPE=ADA to configure a MaxDB instance
  Error in agent 01-A-06-group_add_fs fixed (error was FSTYPE not defined)</changelog>
  <changelog author="fabian.herschel@novell.com" date="1241092800">0.5.1-1 new sap sample added 
  new sap xml templates to support the strings "CI" and "ASCS" as instance type
  the (valid) types "DS" and "SCS" are a bit missleading
  so for now you could use one of "ASCS", "SCS", "DS" or "CI" as instance-type</changelog>
  <changelog author="fabian.herschel@novell.com" date="1255089600">0.5.2-1 fixed problem with here document in SAP-Instance agent</changelog>
  <changelog author="fabian.herschel@novell.com" date="1255089601">0.6.0-1 sap constraints splitted</changelog>
  <changelog author="fabian.herschel@novell.com" date="1257768000">0.6.1-3 SAP ERS support started 
  - stonith meatware
  - 01-masterslave_appl_sapinstance_SCSERS
  - db2/db6 template added
  - make wow ready for build.opensuse.org</changelog>
</package>
</otherdata>