<?xml version="1.0" encoding="UTF-8"?>
<metadata xmlns="http://linux.duke.edu/metadata/common" xmlns:rpm="http://linux.duke.edu/metadata/rpm" packages="114">
<package type="rpm">
  <name>chrony</name>
  <arch>i586</arch>
  <version epoch="0" ver="4.8" rel="176.4"/>
  <checksum type="sha512" pkgid="YES">9ea4ba7ae99c823a1da5ebd11c5f5422a25e149b0f6f9cc6d783bfbad449dfbcd55c3b5e0197198dd72d4d0f2abf49b148107a7f6f917d089012a827683d6a58</checksum>
  <summary>System Clock Synchronization Client and Server</summary>
  <description>Chrony is an implementation of the Network Time Protocol (NTP). It can
synchronize the system clock with NTP servers, reference clocks (e.g. a
GPS receiver), and manual input using wristwatch and keyboard. It can
also operate as an NTPv4 (RFC 5905) server and peer to provide a time
service to other computers in the network.

Chrony consists of two programs: chronyd and chronyc.

Chronyd is a daemon which runs in the background on the system. It
obtains measurements of the system clock’s offset relative to time
servers on other systems via the network and adjusts the system time
accordingly. For isolated systems, the user can periodically enter the
correct time by hand (using chronyc). In either case, chronyd
determines the rate at which the computer gains or loses time, and
compensates for this. Chronyd can act as either a client or a server.

Chronyc provides a user interface to chronyd for monitoring its
performance and configuring various settings. It can do so while
running on the same computer as the chronyd instance it is controlling
or a different computer.</description>
  <packager></packager>
  <url>https://chrony-project.org/</url>
  <time file="1777764092" build="1757082821"/>
  <size package="360460" installed="748330" archive="755004"/>
  <location href="i586/chrony-4.8-176.4.i586.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Productivity/Networking/Other</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>chrony-4.8-176.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="23721"/>
    <rpm:provides>
      <rpm:entry name="chrony" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="chrony(x86-32)" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="config(chrony)" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="group(chrony)"/>
      <rpm:entry name="ntp-daemon"/>
      <rpm:entry name="user(chrony)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/mkdir" pre="1"/>
      <rpm:entry name="/usr/bin/touch" pre="1"/>
      <rpm:entry name="chrony-pool"/>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="libcap.so.2"/>
      <rpm:entry name="libedit.so.0"/>
      <rpm:entry name="libgnutls.so.30"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_4)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_6_3)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.0)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.1)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.29)"/>
      <rpm:entry name="libnettle.so.8"/>
      <rpm:entry name="libnettle.so.8(NETTLE_8)"/>
      <rpm:entry name="libseccomp.so.2"/>
      <rpm:entry name="sysuser-shadow" flags="GE" epoch="0" ver="3.2" pre="1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.42)"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="chrony-pool-nonempty"/>
      <rpm:entry name="logrotate"/>
    </rpm:recommends>
    <file>/etc/chrony.conf</file>
    <file type="dir">/etc/chrony.d</file>
    <file>/etc/chrony.keys</file>
    <file type="dir">/etc/dhcp</file>
    <file type="dir">/etc/dhcp/dhclient.d</file>
    <file>/etc/dhcp/dhclient.d/chrony.sh</file>
    <file>/usr/bin/chronyc</file>
    <file>/usr/sbin/chronyd</file>
  </format>
</package>
<package type="rpm">
  <name>chrony</name>
  <arch>src</arch>
  <version epoch="0" ver="4.8" rel="176.4"/>
  <checksum type="sha512" pkgid="YES">9ef3d598d110cab8ef7b37365e40a451999f76eae6e598f02e38892f1c8b90cf0ef223256c936776b5d5fe2ca241e74ff2bd89ce2c229c7ddb6a522a89152f7b</checksum>
  <summary>System Clock Synchronization Client and Server</summary>
  <description>Chrony is an implementation of the Network Time Protocol (NTP). It can
synchronize the system clock with NTP servers, reference clocks (e.g. a
GPS receiver), and manual input using wristwatch and keyboard. It can
also operate as an NTPv4 (RFC 5905) server and peer to provide a time
service to other computers in the network.

Chrony consists of two programs: chronyd and chronyc.

Chronyd is a daemon which runs in the background on the system. It
obtains measurements of the system clock’s offset relative to time
servers on other systems via the network and adjusts the system time
accordingly. For isolated systems, the user can periodically enter the
correct time by hand (using chronyc). In either case, chronyd
determines the rate at which the computer gains or loses time, and
compensates for this. Chronyd can act as either a client or a server.

Chronyc provides a user interface to chronyd for monitoring its
performance and configuring various settings. It can do so while
running on the same computer as the chronyd instance it is controlling
or a different computer.</description>
  <packager></packager>
  <url>https://chrony-project.org/</url>
  <time file="1777764322" build="1757082821"/>
  <size package="820611" installed="763153" archive="766076"/>
  <location href="src/chrony-4.8-176.4.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Productivity/Networking/Other</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="92676"/>
    <rpm:provides>
      <rpm:entry name="chrony" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="chrony-pool-suse" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="chrony-pool-openSUSE" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="chrony-pool-empty" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="NetworkManager-devel"/>
      <rpm:entry name="bison"/>
      <rpm:entry name="findutils"/>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="gnutls-devel"/>
      <rpm:entry name="libcap-devel"/>
      <rpm:entry name="libedit-devel"/>
      <rpm:entry name="libseccomp-devel"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="pkgconfig(systemd)"/>
      <rpm:entry name="pps-tools-devel"/>
      <rpm:entry name="sysuser-tools"/>
      <rpm:entry name="timezone"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>chrony</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="4.8" rel="176.4"/>
  <checksum type="sha512" pkgid="YES">ddbaf07b56bd694c48e943ff5965102ba0742ff05172a0f63f33dfc7eb42a8bdea3d6a96af404f5f2fa62a71715f4a9763610cf8c8b6cb58e2e7c8582ef96b56</checksum>
  <summary>System Clock Synchronization Client and Server</summary>
  <description>Chrony is an implementation of the Network Time Protocol (NTP). It can
synchronize the system clock with NTP servers, reference clocks (e.g. a
GPS receiver), and manual input using wristwatch and keyboard. It can
also operate as an NTPv4 (RFC 5905) server and peer to provide a time
service to other computers in the network.

Chrony consists of two programs: chronyd and chronyc.

Chronyd is a daemon which runs in the background on the system. It
obtains measurements of the system clock’s offset relative to time
servers on other systems via the network and adjusts the system time
accordingly. For isolated systems, the user can periodically enter the
correct time by hand (using chronyc). In either case, chronyd
determines the rate at which the computer gains or loses time, and
compensates for this. Chronyd can act as either a client or a server.

Chronyc provides a user interface to chronyd for monitoring its
performance and configuring various settings. It can do so while
running on the same computer as the chronyd instance it is controlling
or a different computer.</description>
  <packager></packager>
  <url>https://chrony-project.org/</url>
  <time file="1777764322" build="1757082821"/>
  <size package="353606" installed="747726" archive="754400"/>
  <location href="x86_64/chrony-4.8-176.4.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Productivity/Networking/Other</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>chrony-4.8-176.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="23769"/>
    <rpm:provides>
      <rpm:entry name="chrony" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="chrony(x86-64)" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="config(chrony)" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="group(chrony)"/>
      <rpm:entry name="ntp-daemon"/>
      <rpm:entry name="user(chrony)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/mkdir" pre="1"/>
      <rpm:entry name="/usr/bin/touch" pre="1"/>
      <rpm:entry name="chrony-pool"/>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="libcap.so.2()(64bit)"/>
      <rpm:entry name="libedit.so.0()(64bit)"/>
      <rpm:entry name="libgnutls.so.30()(64bit)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_4)(64bit)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_6_3)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.2.5)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.29)(64bit)"/>
      <rpm:entry name="libnettle.so.8()(64bit)"/>
      <rpm:entry name="libnettle.so.8(NETTLE_8)(64bit)"/>
      <rpm:entry name="libseccomp.so.2()(64bit)"/>
      <rpm:entry name="sysuser-shadow" flags="GE" epoch="0" ver="3.2" pre="1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.42)(64bit)"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="chrony-pool-nonempty"/>
      <rpm:entry name="logrotate"/>
    </rpm:recommends>
    <file>/etc/chrony.conf</file>
    <file type="dir">/etc/chrony.d</file>
    <file>/etc/chrony.keys</file>
    <file type="dir">/etc/dhcp</file>
    <file type="dir">/etc/dhcp/dhclient.d</file>
    <file>/etc/dhcp/dhclient.d/chrony.sh</file>
    <file>/usr/bin/chronyc</file>
    <file>/usr/sbin/chronyd</file>
  </format>
</package>
<package type="rpm">
  <name>chrony-pool-empty</name>
  <arch>noarch</arch>
  <version epoch="0" ver="4.8" rel="176.4"/>
  <checksum type="sha512" pkgid="YES">0ce173659329ec535c0fc58af7e7db10d5a81e9d8f29156d24e09bf72adfa5ac985a0bc6bf08a882a4f99afd090b9a0e491872ab2427f5e86e39d887f48efe2e</checksum>
  <summary>Empty pool preconfiguration for chrony</summary>
  <description>This package provides an empty /etc/chrony.d/pool.conf file for
situations when having servers preconfigured in chrony is undesirable,
e.g. because the servers will be set via DHCP.</description>
  <packager></packager>
  <url>https://chrony-project.org/</url>
  <time file="1777764323" build="1757082821"/>
  <size package="12285" installed="21" archive="284"/>
  <location href="noarch/chrony-pool-empty-4.8-176.4.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Productivity/Networking/Other</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>chrony-4.8-176.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12165"/>
    <rpm:provides>
      <rpm:entry name="chrony-pool" flags="EQ" epoch="0" ver="4.8"/>
      <rpm:entry name="chrony-pool-empty" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="config(chrony-pool-empty)" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="chrony" flags="EQ" epoch="0" ver="4.8"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="chrony-pool"/>
    </rpm:conflicts>
    <file>/etc/chrony.d/pool.conf</file>
  </format>
</package>
<package type="rpm">
  <name>chrony-pool-openSUSE</name>
  <arch>noarch</arch>
  <version epoch="0" ver="4.8" rel="176.4"/>
  <checksum type="sha512" pkgid="YES">193b97560e4486483e45a39bf8d29fe0a0cd512a6c1f8675df6c31385fa7bface674e9bfc6a8fd368ca46a9dcb07853103d5d8678ee59e1ed7ba8994c2fa849c</checksum>
  <summary>Chrony preconfiguration for openSUSE</summary>
  <description>This package configures chrony to use the openSUSE NTP server pool by
default.</description>
  <packager></packager>
  <url>https://chrony-project.org/</url>
  <time file="1777764323" build="1757082821"/>
  <size package="12354" installed="36" archive="296"/>
  <location href="noarch/chrony-pool-openSUSE-4.8-176.4.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Productivity/Networking/Other</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>chrony-4.8-176.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12225"/>
    <rpm:provides>
      <rpm:entry name="chrony-pool" flags="EQ" epoch="0" ver="4.8"/>
      <rpm:entry name="chrony-pool-nonempty"/>
      <rpm:entry name="chrony-pool-openSUSE" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="config(chrony-pool-openSUSE)" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="chrony" flags="EQ" epoch="0" ver="4.8"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="chrony-pool"/>
    </rpm:conflicts>
    <rpm:supplements>
      <rpm:entry name="(chrony and branding-openSUSE)"/>
    </rpm:supplements>
    <file>/etc/chrony.d/pool.conf</file>
  </format>
</package>
<package type="rpm">
  <name>chrony-pool-suse</name>
  <arch>noarch</arch>
  <version epoch="0" ver="4.8" rel="176.4"/>
  <checksum type="sha512" pkgid="YES">fa3539019fe4091d8ce249f73b5028f933cddd2b888e1002504cc83dc7d53db56512c03c8718d662984578e141748484f5bef142ab3002bb51b0af313b248dc1</checksum>
  <summary>Chrony preconfiguration for SUSE</summary>
  <description>This package configures chrony to use the SUSE NTP server pool by
default.</description>
  <packager></packager>
  <url>https://chrony-project.org/</url>
  <time file="1777764323" build="1757082821"/>
  <size package="12322" installed="32" archive="292"/>
  <location href="noarch/chrony-pool-suse-4.8-176.4.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Productivity/Networking/Other</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>chrony-4.8-176.4.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12197"/>
    <rpm:provides>
      <rpm:entry name="chrony-pool" flags="EQ" epoch="0" ver="4.8"/>
      <rpm:entry name="chrony-pool-nonempty"/>
      <rpm:entry name="chrony-pool-suse" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
      <rpm:entry name="config(chrony-pool-suse)" flags="EQ" epoch="0" ver="4.8" rel="176.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="chrony" flags="EQ" epoch="0" ver="4.8"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="chrony-pool"/>
    </rpm:conflicts>
    <rpm:supplements>
      <rpm:entry name="(chrony and branding-SLE)"/>
    </rpm:supplements>
    <file>/etc/chrony.d/pool.conf</file>
  </format>
</package>
<package type="rpm">
  <name>cifs-utils</name>
  <arch>i586</arch>
  <version epoch="0" ver="7.4" rel="4.5"/>
  <checksum type="sha512" pkgid="YES">43a167000f26c8d1773e59d340b01954fbd231e38c47c02a1666cebb3f242fbdb24c9bb0a7d8c615c2a3467296036979c758f21321e57275985a5d8b72b66075</checksum>
  <summary>Utilities for doing and managing mounts of the Linux CIFS filesystem</summary>
  <description>The cifs-utils package consist of utilities for doing and managing mounts of
the Linux CIFS filesystem.</description>
  <packager></packager>
  <url>http://www.samba.org/linux-cifs/cifs-utils/</url>
  <time file="1777764508" build="1749632624"/>
  <size package="119020" installed="283286" archive="287512"/>
  <location href="i586/cifs-utils-7.4-4.5.i586.rpm"/>
  <format>
    <rpm:license>GPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Filesystems</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cifs-utils-7.4-4.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="20509"/>
    <rpm:provides>
      <rpm:entry name="cifs-mount" flags="EQ" epoch="0" ver="7.4"/>
      <rpm:entry name="cifs-utils" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="cifs-utils(x86-32)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="config(cifs-utils)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/python3.13"/>
      <rpm:entry name="keyutils"/>
      <rpm:entry name="libcap-ng.so.0"/>
      <rpm:entry name="libgssapi_krb5.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)"/>
      <rpm:entry name="libkeyutils.so.1"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_0.3)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.0)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libresolv.so.2"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libwbclient.so.0"/>
      <rpm:entry name="libwbclient.so.0(WBCLIENT_0.9)"/>
      <rpm:entry name="update-alternatives" pre="1"/>
      <rpm:entry name="update-alternatives"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="cifs-mount" flags="LT" epoch="0" ver="7.4"/>
    </rpm:obsoletes>
    <file type="ghost">/etc/alternatives/cifs-idmap-plugin</file>
    <file type="dir">/etc/cifs-utils</file>
    <file>/etc/cifs-utils/idmap-plugin</file>
    <file type="dir">/etc/request-key.d</file>
    <file>/etc/request-key.d/cifs.idmap.conf</file>
    <file>/etc/request-key.d/cifs.spnego.conf</file>
    <file type="dir">/etc/samba</file>
    <file>/usr/bin/cifscreds</file>
    <file>/usr/bin/getcifsacl</file>
    <file>/usr/bin/setcifsacl</file>
    <file>/usr/bin/smb2-quota</file>
    <file>/usr/bin/smbinfo</file>
    <file>/usr/sbin/cifs.idmap</file>
    <file>/usr/sbin/cifs.upcall</file>
    <file>/usr/sbin/mount.cifs</file>
    <file>/usr/sbin/mount.smb3</file>
  </format>
</package>
<package type="rpm">
  <name>cifs-utils</name>
  <arch>src</arch>
  <version epoch="0" ver="7.4" rel="4.5"/>
  <checksum type="sha512" pkgid="YES">dc29bce0cb00a81d94850706d38ac4b30f367e758bab416eecbf337d6243975a9f9a05a70b7a9f8776c6ee1f152584b5b668e81e1bfa87c0b8c973de2d493a8c</checksum>
  <summary>Utilities for doing and managing mounts of the Linux CIFS filesystem</summary>
  <description>The cifs-utils package consist of utilities for doing and managing mounts of
the Linux CIFS filesystem.</description>
  <packager></packager>
  <url>http://www.samba.org/linux-cifs/cifs-utils/</url>
  <time file="1777764345" build="1749632624"/>
  <size package="886849" installed="615776" archive="616844"/>
  <location href="src/cifs-utils-7.4-4.5.src.rpm"/>
  <format>
    <rpm:license>GPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Filesystems</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="424301"/>
    <rpm:provides>
      <rpm:entry name="cifs-utils" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="cifs-utils-devel" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="pam_cifscreds" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="automake"/>
      <rpm:entry name="fdupes"/>
      <rpm:entry name="keyutils-devel"/>
      <rpm:entry name="krb5-devel"/>
      <rpm:entry name="libcap-ng-devel"/>
      <rpm:entry name="libtalloc-devel"/>
      <rpm:entry name="pam-devel"/>
      <rpm:entry name="pkg-config"/>
      <rpm:entry name="pkgconfig(wbclient)"/>
      <rpm:entry name="python3-docutils"/>
      <rpm:entry name="update-alternatives"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>cifs-utils</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="7.4" rel="4.5"/>
  <checksum type="sha512" pkgid="YES">fd07889ba5838fef1f14ba54795cd509cae0e60800da89bd292f462cea04a3d76d8d956a004af1cfe4e15fdbe67139aeb98d890920821a4b4986a03a9901d474</checksum>
  <summary>Utilities for doing and managing mounts of the Linux CIFS filesystem</summary>
  <description>The cifs-utils package consist of utilities for doing and managing mounts of
the Linux CIFS filesystem.</description>
  <packager></packager>
  <url>http://www.samba.org/linux-cifs/cifs-utils/</url>
  <time file="1777764345" build="1749632624"/>
  <size package="116943" installed="298594" archive="302824"/>
  <location href="x86_64/cifs-utils-7.4-4.5.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Filesystems</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cifs-utils-7.4-4.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="20549"/>
    <rpm:provides>
      <rpm:entry name="cifs-mount" flags="EQ" epoch="0" ver="7.4"/>
      <rpm:entry name="cifs-utils" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="cifs-utils(x86-64)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="config(cifs-utils)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/python3.13"/>
      <rpm:entry name="keyutils"/>
      <rpm:entry name="libcap-ng.so.0()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit)"/>
      <rpm:entry name="libkeyutils.so.1()(64bit)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_0.3)(64bit)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.0)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libresolv.so.2()(64bit)"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)(64bit)"/>
      <rpm:entry name="libtalloc.so.2()(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)(64bit)"/>
      <rpm:entry name="libwbclient.so.0()(64bit)"/>
      <rpm:entry name="libwbclient.so.0(WBCLIENT_0.9)(64bit)"/>
      <rpm:entry name="update-alternatives" pre="1"/>
      <rpm:entry name="update-alternatives"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="cifs-mount" flags="LT" epoch="0" ver="7.4"/>
    </rpm:obsoletes>
    <file type="ghost">/etc/alternatives/cifs-idmap-plugin</file>
    <file type="dir">/etc/cifs-utils</file>
    <file>/etc/cifs-utils/idmap-plugin</file>
    <file type="dir">/etc/request-key.d</file>
    <file>/etc/request-key.d/cifs.idmap.conf</file>
    <file>/etc/request-key.d/cifs.spnego.conf</file>
    <file type="dir">/etc/samba</file>
    <file>/usr/bin/cifscreds</file>
    <file>/usr/bin/getcifsacl</file>
    <file>/usr/bin/setcifsacl</file>
    <file>/usr/bin/smb2-quota</file>
    <file>/usr/bin/smbinfo</file>
    <file>/usr/sbin/cifs.idmap</file>
    <file>/usr/sbin/cifs.upcall</file>
    <file>/usr/sbin/mount.cifs</file>
    <file>/usr/sbin/mount.smb3</file>
  </format>
</package>
<package type="rpm">
  <name>cifs-utils-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="7.4" rel="4.5"/>
  <checksum type="sha512" pkgid="YES">0621d5601acd65044aed6406eea238e6e32a10e9a9db1b54e82b1ad22020051a7459c39e19b09f06d719b3379c3c5ea4b950c431bf2829a11c698c4b44b0b486</checksum>
  <summary>Files needed for building plugins for cifs-utils</summary>
  <description>The SMB/CIFS protocol is a standard file sharing protocol widely deployed
on Microsoft Windows machines. This package contains the header file
necessary for building ID mapping plugins for cifs-utils.</description>
  <packager></packager>
  <url>http://www.samba.org/linux-cifs/cifs-utils/</url>
  <time file="1777764508" build="1749632624"/>
  <size package="14591" installed="6146" archive="6408"/>
  <location href="i586/cifs-utils-devel-7.4-4.5.i586.rpm"/>
  <format>
    <rpm:license>GPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cifs-utils-7.4-4.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12489"/>
    <rpm:provides>
      <rpm:entry name="cifs-utils-devel" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="cifs-utils-devel(x86-32)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
    </rpm:provides>
  </format>
</package>
<package type="rpm">
  <name>cifs-utils-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="7.4" rel="4.5"/>
  <checksum type="sha512" pkgid="YES">7a77f9721994bae393a975cd6b0660abb6a1033d929b393a8ee63212a434432bd50d0045d7e888fde14c412e4bf9d502a088a8161ffe72da2b83141d1b1a98c3</checksum>
  <summary>Files needed for building plugins for cifs-utils</summary>
  <description>The SMB/CIFS protocol is a standard file sharing protocol widely deployed
on Microsoft Windows machines. This package contains the header file
necessary for building ID mapping plugins for cifs-utils.</description>
  <packager></packager>
  <url>http://www.samba.org/linux-cifs/cifs-utils/</url>
  <time file="1777764345" build="1749632624"/>
  <size package="14591" installed="6146" archive="6408"/>
  <location href="x86_64/cifs-utils-devel-7.4-4.5.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cifs-utils-7.4-4.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12489"/>
    <rpm:provides>
      <rpm:entry name="cifs-utils-devel" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="cifs-utils-devel(x86-64)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
    </rpm:provides>
  </format>
</package>
<package type="rpm">
  <name>cmocka</name>
  <arch>src</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">2a182f8352e8fbb011a929bdba60e830593c62d949996cc214fd40e571effe4ae596e369334a3dd99da76fa56540a133b6129b4ea31bf38a1f801295e0c4d272</checksum>
  <summary>Lightweight library to simplify and generalize unit tests for C</summary>
  <description>cmocka is an elegant unit testing framework for C with support for mock
objects. It only requires the standard C library, works on a range of computing
platforms (including embedded) and with different compilers.

Features:
  * Support for mock objects
  * Only requires the C library
  * Several supported output formats (Subunit, TAP, jUnit XML)
  * Fully documented API
  * Test fixtures
  * Exception handling for signals (SIGSEGV, SIGILL, ...)
  * No fork() used
  * Very well tested
  * Testing of memory leaks, buffer overflows and underflows.

Also, CMocka tries to avoid the use of some of the newer features of C
compilers.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262945" build="1768287363"/>
  <size package="6263867" installed="6230834" archive="6231752"/>
  <location href="src/cmocka-2.0.2-79.1.src.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Productivity/Networking/Other</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="43609"/>
    <rpm:provides>
      <rpm:entry name="libcmocka0" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-devel" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-doc" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-cmake-devel" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="cmake"/>
      <rpm:entry name="doxygen"/>
      <rpm:entry name="glibc-devel"/>
      <rpm:entry name="pkg-config"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">2c71bcc8fef42c693ca00723193c91c6c9951dacef1e14ffe3f44d500480f0d13a6879f5d2a70dede4fe2f5955643fd616a349b904bf51e2150ae3f16980df02</checksum>
  <summary>MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355656" build="1778061166"/>
  <size package="827917" installed="2674693" archive="2679796"/>
  <location href="i586/krb5-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="22917"/>
    <rpm:provides>
      <rpm:entry name="config(krb5)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="libgssapi_krb5.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2(HIDDEN)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)"/>
      <rpm:entry name="libgssrpc.so.4"/>
      <rpm:entry name="libgssrpc.so.4(HIDDEN)"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(HIDDEN)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(HIDDEN)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)"/>
      <rpm:entry name="libkadm5srv_mit.so.12"/>
      <rpm:entry name="libkadm5srv_mit.so.12(HIDDEN)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)"/>
      <rpm:entry name="libkdb5.so.10"/>
      <rpm:entry name="libkdb5.so.10(HIDDEN)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)"/>
      <rpm:entry name="libkrad.so.0"/>
      <rpm:entry name="libkrad.so.0(HIDDEN)"/>
      <rpm:entry name="libkrad.so.0(krad_0_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(HIDDEN)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(HIDDEN)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="crypto-policies"/>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libcrypto.so.3"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libkeyutils.so.1"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_0.3)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.0)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.5)"/>
      <rpm:entry name="libresolv.so.2"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)"/>
      <rpm:entry name="libselinux.so.1"/>
      <rpm:entry name="libselinux.so.1(LIBSELINUX_1.0)"/>
      <rpm:entry name="libssl.so.3"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libverto.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-mini"/>
    </rpm:conflicts>
    <rpm:obsoletes>
      <rpm:entry name="krb5-plugin-preauth-pkinit-nss"/>
    </rpm:obsoletes>
    <file type="dir">/etc/krb5.conf.d</file>
    <file>/etc/krb5.conf.d/crypto-policies</file>
  </format>
</package>
<package type="rpm">
  <name>krb5</name>
  <arch>src</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">d61d36f74497ad2d78105722be8d8351669ba066754316f70b06b7a8390d271018a1824f754596928f527e64fe9166ff2a294234b2035bb2514588a503995253</checksum>
  <summary>MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="9135709" installed="9121932" archive="9125120"/>
  <location href="src/krb5-1.22.2-352.1.src.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="185986"/>
    <rpm:provides>
      <rpm:entry name="krb5" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-client" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-server" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-kdb-ldap" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-pkinit" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-otp" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-spake" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-devel" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="bison"/>
      <rpm:entry name="crypto-policies"/>
      <rpm:entry name="cyrus-sasl-devel"/>
      <rpm:entry name="keyutils"/>
      <rpm:entry name="keyutils-devel"/>
      <rpm:entry name="openldap2-devel"/>
      <rpm:entry name="pam-devel"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="pkgconfig(com_err)"/>
      <rpm:entry name="pkgconfig(libselinux)"/>
      <rpm:entry name="pkgconfig(libssl)"/>
      <rpm:entry name="pkgconfig(libverto)"/>
      <rpm:entry name="pkgconfig(lmdb)"/>
      <rpm:entry name="pkgconfig(ncurses)"/>
      <rpm:entry name="pkgconfig(ss)"/>
      <rpm:entry name="pkgconfig(systemd)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">42d0ea1f9e78a427a69f991895a027598b8b81b848ae852d58ec7726cf163df121bb1c24cea6d3728d484d918630160311c7ab18649d75ee00aa74212257a547</checksum>
  <summary>MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355771" build="1778061166"/>
  <size package="781593" installed="2752729" archive="2757868"/>
  <location href="x86_64/krb5-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="23189"/>
    <rpm:provides>
      <rpm:entry name="config(krb5)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="libgssapi_krb5.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(HIDDEN)(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit)"/>
      <rpm:entry name="libgssrpc.so.4()(64bit)"/>
      <rpm:entry name="libgssrpc.so.4(HIDDEN)(64bit)"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(HIDDEN)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(HIDDEN)(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(HIDDEN)(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkdb5.so.10()(64bit)"/>
      <rpm:entry name="libkdb5.so.10(HIDDEN)(64bit)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)(64bit)"/>
      <rpm:entry name="libkrad.so.0()(64bit)"/>
      <rpm:entry name="libkrad.so.0(HIDDEN)(64bit)"/>
      <rpm:entry name="libkrad.so.0(krad_0_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(HIDDEN)(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(HIDDEN)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="crypto-policies"/>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libcrypto.so.3()(64bit)"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)(64bit)"/>
      <rpm:entry name="libkeyutils.so.1()(64bit)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_0.3)(64bit)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.0)(64bit)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.5)(64bit)"/>
      <rpm:entry name="libresolv.so.2()(64bit)"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)(64bit)"/>
      <rpm:entry name="libselinux.so.1()(64bit)"/>
      <rpm:entry name="libselinux.so.1(LIBSELINUX_1.0)(64bit)"/>
      <rpm:entry name="libssl.so.3()(64bit)"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.0.0)(64bit)"/>
      <rpm:entry name="libverto.so.1()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-mini"/>
    </rpm:conflicts>
    <rpm:obsoletes>
      <rpm:entry name="krb5-plugin-preauth-pkinit-nss"/>
    </rpm:obsoletes>
    <file type="dir">/etc/krb5.conf.d</file>
    <file>/etc/krb5.conf.d/crypto-policies</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">3875887ce83421416052ec047ef8cd31edcfbd45cb461bbf2a88d6860400a0f5431128eada37a62fa5d9e334957d52f45679ff888d2478e89caa3de3b4624c5a</checksum>
  <summary>MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="728601" installed="2142519" archive="2145872"/>
  <location href="x86_64/krb5-32bit-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="20745"/>
    <rpm:provides>
      <rpm:entry name="heimdal-lib-32bit"/>
      <rpm:entry name="krb5-32bit" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-32bit(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="libgssapi_krb5.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2(HIDDEN)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)"/>
      <rpm:entry name="libgssrpc.so.4"/>
      <rpm:entry name="libgssrpc.so.4(HIDDEN)"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(HIDDEN)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(HIDDEN)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)"/>
      <rpm:entry name="libkadm5srv_mit.so.12"/>
      <rpm:entry name="libkadm5srv_mit.so.12(HIDDEN)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)"/>
      <rpm:entry name="libkdb5.so.10"/>
      <rpm:entry name="libkdb5.so.10(HIDDEN)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)"/>
      <rpm:entry name="libkrad.so.0"/>
      <rpm:entry name="libkrad.so.0(HIDDEN)"/>
      <rpm:entry name="libkrad.so.0(krad_0_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(HIDDEN)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(HIDDEN)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libcrypto.so.3"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libkeyutils.so.1"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_0.3)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.0)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.5)"/>
      <rpm:entry name="libresolv.so.2"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)"/>
      <rpm:entry name="libselinux.so.1"/>
      <rpm:entry name="libselinux.so.1(LIBSELINUX_1.0)"/>
      <rpm:entry name="libssl.so.3"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libverto.so.1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="heimdal-lib-32bit"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>krb5-client</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">50ecf87ca5a9709ab1960e0ab898d3580b3d22eeb541accca7bc4c2f7a0372575d1918bf8183e5e8a1a1e545286b49290cf131a00e92db6a98cc4f761bfcdffc</checksum>
  <summary>Client programs of the MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes some required
client programs, like kinit, kadmin, ...</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="171775" installed="442872" archive="447440"/>
  <location href="i586/krb5-client-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="24897"/>
    <rpm:provides>
      <rpm:entry name="krb5-client" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-client(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)"/>
      <rpm:entry name="libkadm5srv_mit.so.12"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)"/>
      <rpm:entry name="libkdb5.so.10"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
      <rpm:entry name="libpam.so.0"/>
      <rpm:entry name="libpam.so.0(LIBPAM_1.0)"/>
      <rpm:entry name="libss.so.2"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-mini"/>
    </rpm:conflicts>
    <file>/usr/bin/gss-client</file>
    <file>/usr/bin/k5srvutil</file>
    <file>/usr/bin/kadmin</file>
    <file>/usr/bin/kdestroy</file>
    <file>/usr/bin/kinit</file>
    <file>/usr/bin/klist</file>
    <file>/usr/bin/kpasswd</file>
    <file>/usr/bin/ksu</file>
    <file>/usr/bin/kswitch</file>
    <file>/usr/bin/ktutil</file>
    <file>/usr/bin/kvno</file>
    <file>/usr/bin/sclient</file>
    <file>/usr/bin/sim_client</file>
    <file>/usr/bin/uuclient</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-client</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">b81b87996b3bf5198d3dab118d6b081b27d853f022e9c202844c91320b0d2166740a755a07e15a47655b85cad3919457b93d9b8d58461ff470a328f7c6c9e0af</checksum>
  <summary>Client programs of the MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes some required
client programs, like kinit, kadmin, ...</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355771" build="1778061166"/>
  <size package="170341" installed="488112" archive="492680"/>
  <location href="x86_64/krb5-client-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="25021"/>
    <rpm:provides>
      <rpm:entry name="krb5-client" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-client(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkdb5.so.10()(64bit)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
      <rpm:entry name="libpam.so.0()(64bit)"/>
      <rpm:entry name="libpam.so.0(LIBPAM_1.0)(64bit)"/>
      <rpm:entry name="libss.so.2()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-mini"/>
    </rpm:conflicts>
    <file>/usr/bin/gss-client</file>
    <file>/usr/bin/k5srvutil</file>
    <file>/usr/bin/kadmin</file>
    <file>/usr/bin/kdestroy</file>
    <file>/usr/bin/kinit</file>
    <file>/usr/bin/klist</file>
    <file>/usr/bin/kpasswd</file>
    <file>/usr/bin/ksu</file>
    <file>/usr/bin/kswitch</file>
    <file>/usr/bin/ktutil</file>
    <file>/usr/bin/kvno</file>
    <file>/usr/bin/sclient</file>
    <file>/usr/bin/sim_client</file>
    <file>/usr/bin/uuclient</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">a673d6723437aa1f2ee131f92b34f023441cda2021a5c8672e7cb11b257fbff5d5937f30cca29c74d34f8d0725b4954242b745ae832a800bf58de9a809cbd139</checksum>
  <summary>Development files for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes Libraries and
Include Files for Development</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="141066" installed="727806" archive="738088"/>
  <location href="i586/krb5-devel-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="23513"/>
    <rpm:provides>
      <rpm:entry name="krb5-devel" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-devel(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="pkgconfig(gssrpc)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-client)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-server)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kdb)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="keyutils-devel"/>
      <rpm:entry name="krb5" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(com_err)"/>
      <rpm:entry name="pkgconfig(gssrpc)"/>
      <rpm:entry name="pkgconfig(kdb)"/>
      <rpm:entry name="pkgconfig(libverto)"/>
      <rpm:entry name="pkgconfig(mit-krb5)"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)"/>
      <rpm:entry name="pkgconfig(ss)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-mini-devel"/>
    </rpm:conflicts>
    <file>/usr/bin/krb5-config</file>
    <file>/usr/sbin/krb5-send-pr</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">c248192a9d57b25e3745f09be6a8df00e511005129d8ad7877335335735b114580967d9a98bb53c16942b1592d8bdd9bd375e74d6b18674696ef3f7207cfffe9</checksum>
  <summary>Development files for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes Libraries and
Include Files for Development</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355772" build="1778061166"/>
  <size package="141074" installed="727822" archive="738136"/>
  <location href="x86_64/krb5-devel-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="23513"/>
    <rpm:provides>
      <rpm:entry name="krb5-devel" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-devel(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="pkgconfig(gssrpc)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-client)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-server)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kdb)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="keyutils-devel"/>
      <rpm:entry name="krb5" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(com_err)"/>
      <rpm:entry name="pkgconfig(gssrpc)"/>
      <rpm:entry name="pkgconfig(kdb)"/>
      <rpm:entry name="pkgconfig(libverto)"/>
      <rpm:entry name="pkgconfig(mit-krb5)"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)"/>
      <rpm:entry name="pkgconfig(ss)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-mini-devel"/>
    </rpm:conflicts>
    <file>/usr/bin/krb5-config</file>
    <file>/usr/sbin/krb5-send-pr</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-devel-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">07e569733b669ad9bbdf68794045396281f9ec9baf61c87d226b45685179591557b0dd09c69802ee9de96b0a5e5391f4b08e540469f241f514b6120b2678801c</checksum>
  <summary>Development files for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes Libraries and
Include Files for Development</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="19109" installed="9458" archive="12556"/>
  <location href="x86_64/krb5-devel-32bit-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="16049"/>
    <rpm:provides>
      <rpm:entry name="krb5-devel-32bit" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-devel-32bit(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="krb5-devel" flags="EQ" epoch="0" ver="1.22.2"/>
    </rpm:requires>
    <file>/usr/lib/baselibs-32bit/bin/krb5-config</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-mini</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">05c64239310e428a2fa14825e6db144b927876d79038a073f5a2bd75cab7112a575e9c15c3fa6c5a28eb7c83258fe79c998cd39eeeb3058968fe95cc51cb5448</checksum>
  <summary>MIT Kerberos5 implementation and libraries with minimal dependencies</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords.
The package delivers MIT Kerberos with reduced features and minimal
dependencies</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355642" build="1778061166"/>
  <size package="1381298" installed="4532845" archive="4547956"/>
  <location href="i586/krb5-mini-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-mini-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="45641"/>
    <rpm:provides>
      <rpm:entry name="config(krb5-mini)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-mini" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-mini(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="libgssapi_krb5.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2(HIDDEN)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)"/>
      <rpm:entry name="libgssrpc.so.4"/>
      <rpm:entry name="libgssrpc.so.4(HIDDEN)"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(HIDDEN)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(HIDDEN)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)"/>
      <rpm:entry name="libkadm5srv_mit.so.12"/>
      <rpm:entry name="libkadm5srv_mit.so.12(HIDDEN)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)"/>
      <rpm:entry name="libkdb5.so.10"/>
      <rpm:entry name="libkdb5.so.10(HIDDEN)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)"/>
      <rpm:entry name="libkrad.so.0"/>
      <rpm:entry name="libkrad.so.0(HIDDEN)"/>
      <rpm:entry name="libkrad.so.0(krad_0_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(HIDDEN)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(HIDDEN)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/mkdir" pre="1"/>
      <rpm:entry name="/usr/bin/touch" pre="1"/>
      <rpm:entry name="crypto-policies"/>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libresolv.so.2"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)"/>
      <rpm:entry name="libselinux.so.1"/>
      <rpm:entry name="libselinux.so.1(LIBSELINUX_1.0)"/>
      <rpm:entry name="libss.so.2"/>
      <rpm:entry name="libverto.so.1"/>
      <rpm:entry name="this-is-only-for-build-envs"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5"/>
      <rpm:entry name="krb5-client"/>
      <rpm:entry name="krb5-mini"/>
      <rpm:entry name="krb5-plugin-kdb-ldap"/>
      <rpm:entry name="krb5-plugin-preauth-otp"/>
      <rpm:entry name="krb5-plugin-preauth-pkinit"/>
      <rpm:entry name="krb5-server"/>
    </rpm:conflicts>
    <rpm:obsoletes>
      <rpm:entry name="krb5-plugin-preauth-pkinit-nss"/>
    </rpm:obsoletes>
    <file type="dir">/etc/krb5.conf.d</file>
    <file>/etc/krb5.conf.d/crypto-policies</file>
    <file>/etc/logrotate.d/krb5-server</file>
    <file>/usr/bin/gss-client</file>
    <file>/usr/bin/k5srvutil</file>
    <file>/usr/bin/kadmin</file>
    <file>/usr/bin/kdestroy</file>
    <file>/usr/bin/kinit</file>
    <file>/usr/bin/klist</file>
    <file>/usr/bin/kpasswd</file>
    <file>/usr/bin/ksu</file>
    <file>/usr/bin/kswitch</file>
    <file>/usr/bin/ktutil</file>
    <file>/usr/bin/kvno</file>
    <file>/usr/bin/sclient</file>
    <file>/usr/bin/sim_client</file>
    <file>/usr/bin/uuclient</file>
    <file>/usr/sbin/gss-server</file>
    <file>/usr/sbin/kadmin.local</file>
    <file>/usr/sbin/kadmind</file>
    <file>/usr/sbin/kdb5_util</file>
    <file>/usr/sbin/kprop</file>
    <file>/usr/sbin/kpropd</file>
    <file>/usr/sbin/kproplog</file>
    <file>/usr/sbin/krb5kdc</file>
    <file>/usr/sbin/rckadmind</file>
    <file>/usr/sbin/rckpropd</file>
    <file>/usr/sbin/rckrb5kdc</file>
    <file>/usr/sbin/sim_server</file>
    <file>/usr/sbin/sserver</file>
    <file>/usr/sbin/uuserver</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-mini</name>
  <arch>src</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">c4d90cf7886e54c1e80add2ad71e5651a0257f6d70883a0498ba586f04b59718db86fc0179671b9cf957b0dbd863c7ba626adc402755a2843c050240c1707906</checksum>
  <summary>MIT Kerberos5 implementation and libraries with minimal dependencies</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords.
The package delivers MIT Kerberos with reduced features and minimal
dependencies</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355643" build="1778061166"/>
  <size package="9121663" installed="9112641" archive="9115716"/>
  <location href="src/krb5-mini-1.22.2-352.1.src.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="173678"/>
    <rpm:provides>
      <rpm:entry name="krb5-mini" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-mini-devel" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="bison"/>
      <rpm:entry name="crypto-policies"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="pkgconfig(com_err)"/>
      <rpm:entry name="pkgconfig(libselinux)"/>
      <rpm:entry name="pkgconfig(libverto)"/>
      <rpm:entry name="pkgconfig(ncurses)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5-mini</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">ee6686b040839b12bb44a3498442fcdf72efcafe6adc6adecc498331ea5ce40f707af2937d7be7dde27af09c5add62c7bef5c28bc2bef12a3d00dd3583bde754</checksum>
  <summary>MIT Kerberos5 implementation and libraries with minimal dependencies</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords.
The package delivers MIT Kerberos with reduced features and minimal
dependencies</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355767" build="1778061166"/>
  <size package="1323883" installed="4680605" archive="4695756"/>
  <location href="x86_64/krb5-mini-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-mini-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="45757"/>
    <rpm:provides>
      <rpm:entry name="config(krb5-mini)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-mini" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-mini(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="libgssapi_krb5.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(HIDDEN)(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit)"/>
      <rpm:entry name="libgssrpc.so.4()(64bit)"/>
      <rpm:entry name="libgssrpc.so.4(HIDDEN)(64bit)"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(HIDDEN)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(HIDDEN)(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(HIDDEN)(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkdb5.so.10()(64bit)"/>
      <rpm:entry name="libkdb5.so.10(HIDDEN)(64bit)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)(64bit)"/>
      <rpm:entry name="libkrad.so.0()(64bit)"/>
      <rpm:entry name="libkrad.so.0(HIDDEN)(64bit)"/>
      <rpm:entry name="libkrad.so.0(krad_0_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(HIDDEN)(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(HIDDEN)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/mkdir" pre="1"/>
      <rpm:entry name="/usr/bin/touch" pre="1"/>
      <rpm:entry name="crypto-policies"/>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libresolv.so.2()(64bit)"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)(64bit)"/>
      <rpm:entry name="libselinux.so.1()(64bit)"/>
      <rpm:entry name="libselinux.so.1(LIBSELINUX_1.0)(64bit)"/>
      <rpm:entry name="libss.so.2()(64bit)"/>
      <rpm:entry name="libverto.so.1()(64bit)"/>
      <rpm:entry name="this-is-only-for-build-envs"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5"/>
      <rpm:entry name="krb5-client"/>
      <rpm:entry name="krb5-mini"/>
      <rpm:entry name="krb5-plugin-kdb-ldap"/>
      <rpm:entry name="krb5-plugin-preauth-otp"/>
      <rpm:entry name="krb5-plugin-preauth-pkinit"/>
      <rpm:entry name="krb5-server"/>
    </rpm:conflicts>
    <rpm:obsoletes>
      <rpm:entry name="krb5-plugin-preauth-pkinit-nss"/>
    </rpm:obsoletes>
    <file type="dir">/etc/krb5.conf.d</file>
    <file>/etc/krb5.conf.d/crypto-policies</file>
    <file>/etc/logrotate.d/krb5-server</file>
    <file>/usr/bin/gss-client</file>
    <file>/usr/bin/k5srvutil</file>
    <file>/usr/bin/kadmin</file>
    <file>/usr/bin/kdestroy</file>
    <file>/usr/bin/kinit</file>
    <file>/usr/bin/klist</file>
    <file>/usr/bin/kpasswd</file>
    <file>/usr/bin/ksu</file>
    <file>/usr/bin/kswitch</file>
    <file>/usr/bin/ktutil</file>
    <file>/usr/bin/kvno</file>
    <file>/usr/bin/sclient</file>
    <file>/usr/bin/sim_client</file>
    <file>/usr/bin/uuclient</file>
    <file>/usr/sbin/gss-server</file>
    <file>/usr/sbin/kadmin.local</file>
    <file>/usr/sbin/kadmind</file>
    <file>/usr/sbin/kdb5_util</file>
    <file>/usr/sbin/kprop</file>
    <file>/usr/sbin/kpropd</file>
    <file>/usr/sbin/kproplog</file>
    <file>/usr/sbin/krb5kdc</file>
    <file>/usr/sbin/rckadmind</file>
    <file>/usr/sbin/rckpropd</file>
    <file>/usr/sbin/rckrb5kdc</file>
    <file>/usr/sbin/sim_server</file>
    <file>/usr/sbin/sserver</file>
    <file>/usr/sbin/uuserver</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-mini-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">ea98d7dcaf17b80eab650888d9b56195ce309bbfed9e414d302dd6dd9f794b5649f6c2a26ee864ea1a114f04b84133c77f4916a889ed748ddcafd11bc8f7c457</checksum>
  <summary>Development files for MIT Kerberos5 (openSUSE mini variant)</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes Libraries and
Include Files for Development</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355643" build="1778061166"/>
  <size package="139997" installed="727786" archive="738068"/>
  <location href="i586/krb5-mini-devel-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-mini-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="22453"/>
    <rpm:provides>
      <rpm:entry name="krb5-devel" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="krb5-mini-devel" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-mini-devel(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="pkgconfig(gssrpc)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-client)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-server)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kdb)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="krb5-mini" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(com_err)"/>
      <rpm:entry name="pkgconfig(gssrpc)"/>
      <rpm:entry name="pkgconfig(kdb)"/>
      <rpm:entry name="pkgconfig(libverto)"/>
      <rpm:entry name="pkgconfig(mit-krb5)"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)"/>
      <rpm:entry name="pkgconfig(ss)"/>
      <rpm:entry name="this-is-only-for-build-envs"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-devel"/>
    </rpm:conflicts>
    <file>/usr/bin/krb5-config</file>
    <file>/usr/sbin/krb5-send-pr</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-mini-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">90ec72c5fb486d80d79acd4b36d89908c4aa6ea4c4700a74dd9d84be9369863ec794090f0672801456997caf10cd27f3b354949545d99bb2886e711ebcc08dc1</checksum>
  <summary>Development files for MIT Kerberos5 (openSUSE mini variant)</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes Libraries and
Include Files for Development</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355767" build="1778061166"/>
  <size package="140010" installed="727802" archive="738116"/>
  <location href="x86_64/krb5-mini-devel-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-mini-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="22457"/>
    <rpm:provides>
      <rpm:entry name="krb5-devel" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="krb5-mini-devel" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-mini-devel(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="pkgconfig(gssrpc)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-client)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kadm-server)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(kdb)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5)" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)" flags="EQ" epoch="0" ver="1.22.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="krb5-mini" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="pkgconfig(com_err)"/>
      <rpm:entry name="pkgconfig(gssrpc)"/>
      <rpm:entry name="pkgconfig(kdb)"/>
      <rpm:entry name="pkgconfig(libverto)"/>
      <rpm:entry name="pkgconfig(mit-krb5)"/>
      <rpm:entry name="pkgconfig(mit-krb5-gssapi)"/>
      <rpm:entry name="pkgconfig(ss)"/>
      <rpm:entry name="this-is-only-for-build-envs"/>
    </rpm:requires>
    <rpm:conflicts>
      <rpm:entry name="krb5-devel"/>
    </rpm:conflicts>
    <file>/usr/bin/krb5-config</file>
    <file>/usr/sbin/krb5-send-pr</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-kdb-ldap</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">c5dc5c6da923535019b6fbe64522682b22a943475fa4f1dbe874295d9973029ebaa94fdd6c3e97ce9654c2ac82f16416670365ef1640243db10a8a92b8649b8a</checksum>
  <summary>LDAP database plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords. This package contains the LDAP
database plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="100600" installed="279337" archive="281300"/>
  <location href="i586/krb5-plugin-kdb-ldap-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="17213"/>
    <rpm:provides>
      <rpm:entry name="config(krb5-plugin-kdb-ldap)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-kdb-ldap" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-kdb-ldap(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="libkdb_ldap.so.1"/>
      <rpm:entry name="libkdb_ldap.so.1(HIDDEN)"/>
      <rpm:entry name="libkdb_ldap.so.1(kdb_ldap_1_MIT)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="krb5-server" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libgssrpc.so.4"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkadm5srv_mit.so.12"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)"/>
      <rpm:entry name="libkdb5.so.10"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
      <rpm:entry name="libldap.so.2"/>
      <rpm:entry name="libldap.so.2(OPENLDAP_2.200)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <file>/usr/sbin/kdb5_ldap_util</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-kdb-ldap</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">aa9babb4a33f02311393f3ced7a171857f2ab579d006a549d9ae66a6d6101851208b46761ec362c992bb80b935facd2a86c142f6f6b4a3bd0667721a3a94ace2</checksum>
  <summary>LDAP database plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of clear text passwords. This package contains the LDAP
database plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355772" build="1778061166"/>
  <size package="95763" installed="277617" archive="279588"/>
  <location href="x86_64/krb5-plugin-kdb-ldap-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="17337"/>
    <rpm:provides>
      <rpm:entry name="config(krb5-plugin-kdb-ldap)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-kdb-ldap" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-kdb-ldap(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="libkdb_ldap.so.1()(64bit)"/>
      <rpm:entry name="libkdb_ldap.so.1(HIDDEN)(64bit)"/>
      <rpm:entry name="libkdb_ldap.so.1(kdb_ldap_1_MIT)(64bit)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="krb5-server" flags="EQ" epoch="0" ver="1.22.2"/>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libgssrpc.so.4()(64bit)"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkdb5.so.10()(64bit)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
      <rpm:entry name="libldap.so.2()(64bit)"/>
      <rpm:entry name="libldap.so.2(OPENLDAP_2.200)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <file>/usr/sbin/kdb5_ldap_util</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-preauth-otp</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">df86a56e9a0030d353e8f7dcbce2809c42502fe11a623058442bf2414689f66512cf4fa70bbe34ed9be395639a2a01a3571bb5596017b0fe9e47724eb74f7017</checksum>
  <summary>OTP preauthentication plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes a OTP plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="24569" installed="29956" archive="30636"/>
  <location href="i586/krb5-plugin-preauth-otp-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14769"/>
    <rpm:provides>
      <rpm:entry name="krb5-plugin-preauth-otp" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-otp(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkrad.so.0"/>
      <rpm:entry name="libkrad.so.0(krad_0_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.8)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-preauth-otp</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">cbbcaf5fc0deb9d164cdae221e5b585fddb3ff10d3297c1abcd8ff3a43a54b137934412d135524a6fd806a2c47321e5b6100d7b413742fde04fe26c782bd664f</checksum>
  <summary>OTP preauthentication plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes a OTP plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355772" build="1778061166"/>
  <size package="24224" installed="31432" archive="32116"/>
  <location href="x86_64/krb5-plugin-preauth-otp-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14825"/>
    <rpm:provides>
      <rpm:entry name="krb5-plugin-preauth-otp" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-otp(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkrad.so.0()(64bit)"/>
      <rpm:entry name="libkrad.so.0(krad_0_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.8)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-preauth-pkinit</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">5cf53cb3d8cd5f822c631ce164605915dd905044682db2d9c31c5bd337c0be10e4c5ead746de44e9e65df65088140d3413dfedb1b0c0012bf4c1f33329dac6e9</checksum>
  <summary>PKINIT preauthentication plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes a PKINIT plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="69882" installed="148828" archive="149512"/>
  <location href="i586/krb5-plugin-preauth-pkinit-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14889"/>
    <rpm:provides>
      <rpm:entry name="krb5-plugin-preauth-pkinit" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-pkinit(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libcrypto.so.3"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-preauth-pkinit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">d47a06de60f7fd9715f3ed02a006ef6c0267349ab4e9bb245c1c956552500679ab2fafe39275c51638f38827d11cfacc5b851aa4bc5f0ff6d96110080254a42b</checksum>
  <summary>PKINIT preauthentication plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes a PKINIT plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355772" build="1778061166"/>
  <size package="65209" installed="153240" archive="153928"/>
  <location href="x86_64/krb5-plugin-preauth-pkinit-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14929"/>
    <rpm:provides>
      <rpm:entry name="krb5-plugin-preauth-pkinit" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-pkinit(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libcrypto.so.3()(64bit)"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-preauth-spake</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">582963ae6d4d331f5400745082c61c27d6b0357a02507a24d3db0e7a2d2f79d59846717a2d34b2a1ca80bef1fb9163b438e07a26d6f3e45cccc2e4b5df9e79e4</checksum>
  <summary>SPAKE preauthentication plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes a SPAKE plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="75079" installed="107128" archive="107812"/>
  <location href="i586/krb5-plugin-preauth-spake-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14701"/>
    <rpm:provides>
      <rpm:entry name="krb5-plugin-preauth-spake" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-spake(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcrypto.so.3"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.25)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5-plugin-preauth-spake</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">61a003e9471c166e2c724e9ae6198ad8e53b074b6532f52a6785bedf07c501a082e99b4e1876dd2b2f632907ce92ca11f234b99e97f7ef21894af22fe75a5145</checksum>
  <summary>SPAKE preauthentication plugin for MIT Kerberos5</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes a SPAKE plugin.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355772" build="1778061166"/>
  <size package="76833" installed="121504" archive="122188"/>
  <location href="x86_64/krb5-plugin-preauth-spake-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14773"/>
    <rpm:provides>
      <rpm:entry name="krb5-plugin-preauth-spake" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-plugin-preauth-spake(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcrypto.so.3()(64bit)"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.25)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>krb5-server</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">5f4aaed6fa78578e093292d8c0bf47813bb028a4500981db26621be55954539fbd24b0884e2bcd11245b4410eb276d28ecb29226c1822d0305d7872bd3cbb479</checksum>
  <summary>Server program of the MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes the kdc, kadmind
and more.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355657" build="1778061166"/>
  <size package="463328" installed="1418836" archive="1425336"/>
  <location href="i586/krb5-server-1.22.2-352.1.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="29561"/>
    <rpm:provides>
      <rpm:entry name="config(krb5-server)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-server" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-server(x86-32)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/mkdir" pre="1"/>
      <rpm:entry name="/usr/bin/touch" pre="1"/>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="libcom_err.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)"/>
      <rpm:entry name="libgssrpc.so.4"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)"/>
      <rpm:entry name="libk5crypto.so.3"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)"/>
      <rpm:entry name="libkadm5srv_mit.so.12"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)"/>
      <rpm:entry name="libkdb5.so.10"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)"/>
      <rpm:entry name="libkrb5.so.3"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)"/>
      <rpm:entry name="libkrb5support.so.0"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)"/>
      <rpm:entry name="liblmdb-0.9.35.so"/>
      <rpm:entry name="libss.so.2"/>
      <rpm:entry name="libverto-libev1"/>
      <rpm:entry name="libverto.so.1"/>
      <rpm:entry name="logrotate"/>
      <rpm:entry name="perl-Date-Calc"/>
      <rpm:entry name="systemd" pre="1"/>
      <rpm:entry name="systemd"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <file>/etc/logrotate.d/krb5-server</file>
    <file>/usr/sbin/gss-server</file>
    <file>/usr/sbin/kadmin.local</file>
    <file>/usr/sbin/kadmind</file>
    <file>/usr/sbin/kdb5_util</file>
    <file>/usr/sbin/kprop</file>
    <file>/usr/sbin/kpropd</file>
    <file>/usr/sbin/kproplog</file>
    <file>/usr/sbin/krb5kdc</file>
    <file>/usr/sbin/rckadmind</file>
    <file>/usr/sbin/rckpropd</file>
    <file>/usr/sbin/rckrb5kdc</file>
    <file>/usr/sbin/sim_server</file>
    <file>/usr/sbin/sserver</file>
    <file>/usr/sbin/uuserver</file>
  </format>
</package>
<package type="rpm">
  <name>krb5-server</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.2" rel="352.1"/>
  <checksum type="sha512" pkgid="YES">1c16615ffc159e720fab08b49d2f34d2e82a272f9e01b6595957449489606649e84a43f1409af528f2532c42ad117e7d369e03cb957a718931e594bd4501a5c3</checksum>
  <summary>Server program of the MIT Kerberos5 implementation</summary>
  <description>Kerberos V5 is a trusted-third-party network authentication system,
which can improve network security by eliminating the insecure
practice of cleartext passwords. This package includes the kdc, kadmind
and more.</description>
  <packager></packager>
  <url>https://kerberos.org/dist/</url>
  <time file="1778355772" build="1778061166"/>
  <size package="451452" installed="1461612" archive="1468116"/>
  <location href="x86_64/krb5-server-1.22.2-352.1.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>krb5-1.22.2-352.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="29609"/>
    <rpm:provides>
      <rpm:entry name="config(krb5-server)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-server" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
      <rpm:entry name="krb5-server(x86-64)" flags="EQ" epoch="0" ver="1.22.2" rel="352.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/mkdir" pre="1"/>
      <rpm:entry name="/usr/bin/touch" pre="1"/>
      <rpm:entry name="fillup" pre="1"/>
      <rpm:entry name="libcom_err.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2()(64bit)"/>
      <rpm:entry name="libgssapi_krb5.so.2(gssapi_krb5_2_MIT)(64bit)"/>
      <rpm:entry name="libgssrpc.so.4()(64bit)"/>
      <rpm:entry name="libgssrpc.so.4(gssrpc_4_MIT)(64bit)"/>
      <rpm:entry name="libk5crypto.so.3()(64bit)"/>
      <rpm:entry name="libk5crypto.so.3(k5crypto_3_MIT)(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5clnt_mit.so.12(kadm5clnt_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12()(64bit)"/>
      <rpm:entry name="libkadm5srv_mit.so.12(kadm5srv_mit_12_MIT)(64bit)"/>
      <rpm:entry name="libkdb5.so.10()(64bit)"/>
      <rpm:entry name="libkdb5.so.10(kdb5_10_MIT)(64bit)"/>
      <rpm:entry name="libkrb5.so.3()(64bit)"/>
      <rpm:entry name="libkrb5.so.3(krb5_3_MIT)(64bit)"/>
      <rpm:entry name="libkrb5support.so.0()(64bit)"/>
      <rpm:entry name="libkrb5support.so.0(krb5support_0_MIT)(64bit)"/>
      <rpm:entry name="liblmdb-0.9.35.so()(64bit)"/>
      <rpm:entry name="libss.so.2()(64bit)"/>
      <rpm:entry name="libverto-libev1"/>
      <rpm:entry name="libverto.so.1()(64bit)"/>
      <rpm:entry name="logrotate"/>
      <rpm:entry name="perl-Date-Calc"/>
      <rpm:entry name="systemd" pre="1"/>
      <rpm:entry name="systemd"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <file>/etc/logrotate.d/krb5-server</file>
    <file>/usr/sbin/gss-server</file>
    <file>/usr/sbin/kadmin.local</file>
    <file>/usr/sbin/kadmind</file>
    <file>/usr/sbin/kdb5_util</file>
    <file>/usr/sbin/kprop</file>
    <file>/usr/sbin/kpropd</file>
    <file>/usr/sbin/kproplog</file>
    <file>/usr/sbin/krb5kdc</file>
    <file>/usr/sbin/rckadmind</file>
    <file>/usr/sbin/rckpropd</file>
    <file>/usr/sbin/rckrb5kdc</file>
    <file>/usr/sbin/sim_server</file>
    <file>/usr/sbin/sserver</file>
    <file>/usr/sbin/uuserver</file>
  </format>
</package>
<package type="rpm">
  <name>libcmocka-cmake-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">a26e82578f73a04af879c572c89cb88f5a33ecc920b4108ed48764bea92cf4eec7428a75569dafefabe7efb6057182afaeed00db92b4f5b5e79fb18ec1aabcbe</checksum>
  <summary>CMake support for the cmocka library</summary>
  <description>cmake support for developing with the cmocka unit testing library.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262945" build="1768287363"/>
  <size package="20089" installed="8352" archive="9268"/>
  <location href="i586/libcmocka-cmake-devel-2.0.2-79.1.i586.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="17529"/>
    <rpm:provides>
      <rpm:entry name="cmake(cmocka)" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka-cmake" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka-cmake-devel" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-cmake-devel(x86-32)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-devel:/usr/lib/cmake/cmocka"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="cmake"/>
      <rpm:entry name="libcmocka-devel" flags="EQ" epoch="0" ver="2.0.2"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="libcmocka-cmake" flags="LT" epoch="0" ver="2.0.2"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>libcmocka-cmake-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">6cb14f8ae32775422955cc8661704a0941a1e10edad5a1a2760e5913487a8a609b8c9e696ad95db78d8956be078f0c901ec7f9a1bd8971ccac19aa123ecf95ce</checksum>
  <summary>CMake support for the cmocka library</summary>
  <description>cmake support for developing with the cmocka unit testing library.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262882" build="1768287363"/>
  <size package="20095" installed="8362" archive="9280"/>
  <location href="x86_64/libcmocka-cmake-devel-2.0.2-79.1.x86_64.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="17533"/>
    <rpm:provides>
      <rpm:entry name="cmake(cmocka)" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka-cmake" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka-cmake-devel" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-cmake-devel(x86-64)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-devel:/usr/lib64/cmake/cmocka"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="cmake"/>
      <rpm:entry name="libcmocka-devel" flags="EQ" epoch="0" ver="2.0.2"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="libcmocka-cmake" flags="LT" epoch="0" ver="2.0.2"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>libcmocka-cmake-devel-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">e627311ad4d51743ee2d0761e69fd01a630168774767bd65aad7477ac44ef21d99271b8861016cdbdc4a820eac60db814a5428a3a1a9ceb903b72d960a45e33e</checksum>
  <summary>CMake support for the cmocka library</summary>
  <description>cmake support for developing with the cmocka unit testing library.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262945" build="1768287363"/>
  <size package="20011" installed="8352" archive="9396"/>
  <location href="x86_64/libcmocka-cmake-devel-32bit-2.0.2-79.1.x86_64.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="17441"/>
    <rpm:provides>
      <rpm:entry name="cmake(cmocka)" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka-cmake-devel-32bit" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-cmake-devel-32bit(x86-64)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcmocka-cmake-devel" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka-devel-32bit" flags="EQ" epoch="0" ver="2.0.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libcmocka-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">91d96726e9ff2c2d716f5866bf0ae478b8a2153ad26f5f7aee22b385897ee210ab990d13a34e984a377708318c694dea03a07796464b380405cbcfaf40197dbb</checksum>
  <summary>Development headers for the cmocka library</summary>
  <description>Development headers for the cmocka unit testing library.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262946" build="1768287363"/>
  <size package="44412" installed="250649" archive="251476"/>
  <location href="i586/libcmocka-devel-2.0.2-79.1.i586.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="17445"/>
    <rpm:provides>
      <rpm:entry name="libcmocka-devel" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-devel(x86-32)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="pkgconfig(cmocka)" flags="EQ" epoch="0" ver="2.0.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="(libcmocka-cmake-devel if cmake)"/>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libcmocka0" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="pkgconf-pkg-config"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libcmocka-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">c04f2b2c185fbf29120fc5a9b73915e5389db44509c60fdb46695e1c81e8bd647353aa3f0bca71e67885bc19e0f3197d90bdd340b1c8e449d2d790a6dd8464ef</checksum>
  <summary>Development headers for the cmocka library</summary>
  <description>Development headers for the cmocka unit testing library.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262882" build="1768287363"/>
  <size package="44419" installed="250651" archive="251480"/>
  <location href="x86_64/libcmocka-devel-2.0.2-79.1.x86_64.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="17445"/>
    <rpm:provides>
      <rpm:entry name="libcmocka-devel" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-devel(x86-64)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="pkgconfig(cmocka)" flags="EQ" epoch="0" ver="2.0.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="(libcmocka-cmake-devel if cmake)"/>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libcmocka0" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="pkgconf-pkg-config"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libcmocka-devel-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">86a5d78a06b7bf5fcdc38e980c35a487e0bb6ea6bbf46ffd730a175bec942165453de11934f5838a7093b908a7b8dfcb171d6aa9bdc920c62c01d0ed14092219</checksum>
  <summary>Development headers for the cmocka library</summary>
  <description>Development headers for the cmocka unit testing library.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262946" build="1768287363"/>
  <size package="17042" installed="224" archive="628"/>
  <location href="x86_64/libcmocka-devel-32bit-2.0.2-79.1.x86_64.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="16785"/>
    <rpm:provides>
      <rpm:entry name="libcmocka-devel-32bit" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka-devel-32bit(x86-64)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcmocka-devel" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka0-32bit" flags="EQ" epoch="0" ver="2.0.2"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libcmocka-doc</name>
  <arch>noarch</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">d39c811daedab7c5a6b759b1b105f653c56faf0dea92127cf8711b40b6a6ca160c864e1c9d9fec265c46decc51a8722445b374d0a76b6d35a2e293ac4c2761bf</checksum>
  <summary>Documentation for the cmocka library</summary>
  <description>Documentation for the cmocka unit testing library.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262946" build="1768287363"/>
  <size package="184066" installed="2137565" archive="2171872"/>
  <location href="noarch/libcmocka-doc-2.0.2-79.1.noarch.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="42057"/>
    <rpm:provides>
      <rpm:entry name="libcmocka-devel:/usr/share/doc/packages/libcmocka-devel"/>
      <rpm:entry name="libcmocka-doc" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
    </rpm:provides>
    <rpm:enhances>
      <rpm:entry name="libcmocka-devel"/>
    </rpm:enhances>
  </format>
</package>
<package type="rpm">
  <name>libcmocka0</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">4d7f0f212be25a8e13e4498593a978755e33811e9304a9ddf61e7a1f6c6885784aa4e931ed05553b36331bbf1a3473f8055fe1011389310e4bcd812fb772ad18</checksum>
  <summary>Lightweight library to simplify and generalize unit tests for C</summary>
  <description>cmocka is an elegant unit testing framework for C with support for mock
objects. It only requires the standard C library, works on a range of computing
platforms (including embedded) and with different compilers.

Features:
  * Support for mock objects
  * Only requires the C library
  * Several supported output formats (Subunit, TAP, jUnit XML)
  * Fully documented API
  * Test fixtures
  * Exception handling for signals (SIGSEGV, SIGILL, ...)
  * No fork() used
  * Very well tested
  * Testing of memory leaks, buffer overflows and underflows.

Also, CMocka tries to avoid the use of some of the newer features of C
compilers.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262946" build="1768287363"/>
  <size package="57238" installed="108984" archive="110308"/>
  <location href="i586/libcmocka0-2.0.2-79.1.i586.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="18841"/>
    <rpm:provides>
      <rpm:entry name="libcmocka.so.0"/>
      <rpm:entry name="libcmocka0" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka0(x86-32)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux.so.2"/>
      <rpm:entry name="ld-linux.so.2(GLIBC_2.3)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.17)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libcmocka0</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">e79010dc8ecbb7218c80e65b82c5518d0e9e895ca671eda0d63ab4d61450e4c9014778b315ba417ad714cf52348374f0917c2a098506a99e7f7d610e38528c51</checksum>
  <summary>Lightweight library to simplify and generalize unit tests for C</summary>
  <description>cmocka is an elegant unit testing framework for C with support for mock
objects. It only requires the standard C library, works on a range of computing
platforms (including embedded) and with different compilers.

Features:
  * Support for mock objects
  * Only requires the C library
  * Several supported output formats (Subunit, TAP, jUnit XML)
  * Fully documented API
  * Test fixtures
  * Exception handling for signals (SIGSEGV, SIGILL, ...)
  * No fork() used
  * Very well tested
  * Testing of memory leaks, buffer overflows and underflows.

Also, CMocka tries to avoid the use of some of the newer features of C
compilers.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262882" build="1768287363"/>
  <size package="54008" installed="107388" archive="108720"/>
  <location href="x86_64/libcmocka0-2.0.2-79.1.x86_64.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="18865"/>
    <rpm:provides>
      <rpm:entry name="libcmocka.so.0()(64bit)"/>
      <rpm:entry name="libcmocka0" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka0(x86-64)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-x86-64.so.2()(64bit)"/>
      <rpm:entry name="ld-linux-x86-64.so.2(GLIBC_2.3)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.17)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libcmocka0-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.0.2" rel="79.1"/>
  <checksum type="sha512" pkgid="YES">5fd4440ae93df6baef9b0c4c08bd4b5636bfb7bc91c7a1fc8554537186d4f7267f5ad81f3303d7c71d97b817d5a7de3ede9ecd5c833bfd3a9f7148ae97e8db66</checksum>
  <summary>Lightweight library to simplify and generalize unit tests for C</summary>
  <description>cmocka is an elegant unit testing framework for C with support for mock
objects. It only requires the standard C library, works on a range of computing
platforms (including embedded) and with different compilers.

Features:
  * Support for mock objects
  * Only requires the C library
  * Several supported output formats (Subunit, TAP, jUnit XML)
  * Fully documented API
  * Test fixtures
  * Exception handling for signals (SIGSEGV, SIGILL, ...)
  * No fork() used
  * Very well tested
  * Testing of memory leaks, buffer overflows and underflows.

Also, CMocka tries to avoid the use of some of the newer features of C
compilers.</description>
  <packager></packager>
  <url>https://cmocka.org</url>
  <time file="1779262946" build="1768287363"/>
  <size package="47049" installed="79982" archive="80384"/>
  <location href="x86_64/libcmocka0-32bit-2.0.2-79.1.x86_64.rpm"/>
  <format>
    <rpm:license>Apache-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cmocka-2.0.2-79.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="18053"/>
    <rpm:provides>
      <rpm:entry name="libcmocka-32bit" flags="EQ" epoch="0" ver="2.0.2"/>
      <rpm:entry name="libcmocka.so.0"/>
      <rpm:entry name="libcmocka0-32bit" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
      <rpm:entry name="libcmocka0-32bit(x86-64)" flags="EQ" epoch="0" ver="2.0.2" rel="79.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="ld-linux.so.2"/>
      <rpm:entry name="ld-linux.so.2(GLIBC_2.3)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.17)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="libmockery-32bit" flags="LE" epoch="0" ver="2.0.2"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>libnghttp3-9</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.15.0" rel="31.2"/>
  <checksum type="sha512" pkgid="YES">b5c3b138c42fe04b464d2db219b17d86ed7b3afd72081a32d174832fae729d733c5a18ab31db83d269b4001eaab5663bc842e0deeb339cd2711097d675ca37b4</checksum>
  <summary>Hypertext Transfer Protocol version 3 implementation</summary>
  <description>nghttp3 is an implementation of RFC 9114 HTTP/3 mapping over QUIC and
RFC 9204 QPACK in C.

It does not depend on any particular QUIC transport implementation.

This library implements RFC 9114 HTTP/3. It does not support server
push.

The following extensions have been implemented:

* Extensible Prioritization Scheme for HTTP
* Bootstrapping WebSockets with HTTP/3</description>
  <packager></packager>
  <url>https://nghttp2.org/nghttp3/</url>
  <time file="1777606879" build="1773225330"/>
  <size package="88069" installed="188476" archive="189176"/>
  <location href="i586/libnghttp3-9-1.15.0-31.2.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>nghttp3-1.15.0-31.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="13913"/>
    <rpm:provides>
      <rpm:entry name="libnghttp3-9" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="libnghttp3-9(x86-32)" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="libnghttp3.so.9"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libnghttp3-9</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.15.0" rel="31.2"/>
  <checksum type="sha512" pkgid="YES">17fac6d9f6b23630f5c53c6ceb6e910d637c54164deb6af9f283ef4de820d134012b0eb8f4888f08eae64de507ebf2d811893434d825d4599da09378841208f8</checksum>
  <summary>Hypertext Transfer Protocol version 3 implementation</summary>
  <description>nghttp3 is an implementation of RFC 9114 HTTP/3 mapping over QUIC and
RFC 9204 QPACK in C.

It does not depend on any particular QUIC transport implementation.

This library implements RFC 9114 HTTP/3. It does not support server
push.

The following extensions have been implemented:

* Extensible Prioritization Scheme for HTTP
* Bootstrapping WebSockets with HTTP/3</description>
  <packager></packager>
  <url>https://nghttp2.org/nghttp3/</url>
  <time file="1777606823" build="1773225330"/>
  <size package="78798" installed="183852" archive="184560"/>
  <location href="x86_64/libnghttp3-9-1.15.0-31.2.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>nghttp3-1.15.0-31.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="13953"/>
    <rpm:provides>
      <rpm:entry name="libnghttp3-9" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="libnghttp3-9(x86-64)" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="libnghttp3.so.9()(64bit)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.14)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libnghttp3-9-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.15.0" rel="31.2"/>
  <checksum type="sha512" pkgid="YES">86bd847b7de177bb032a668a65ae9cfad1ea17a7e9c5d7276f98def06e007666663f69d53aa18a6ab8b48bb2e1ad2770dce265c472e28f60a81a1b4e76219203</checksum>
  <summary>Hypertext Transfer Protocol version 3 implementation</summary>
  <description>nghttp3 is an implementation of RFC 9114 HTTP/3 mapping over QUIC and
RFC 9204 QPACK in C.

It does not depend on any particular QUIC transport implementation.

This library implements RFC 9114 HTTP/3. It does not support server
push.

The following extensions have been implemented:

* Extensible Prioritization Scheme for HTTP
* Bootstrapping WebSockets with HTTP/3</description>
  <packager></packager>
  <url>https://nghttp2.org/nghttp3/</url>
  <time file="1777606879" build="1773225330"/>
  <size package="86828" installed="187395" archive="187796"/>
  <location href="x86_64/libnghttp3-9-32bit-1.15.0-31.2.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>nghttp3-1.15.0-31.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="13557"/>
    <rpm:provides>
      <rpm:entry name="libnghttp3-9-32bit" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="libnghttp3-9-32bit(x86-64)" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="libnghttp3.so.9"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2-16</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">2163fefb93f42ed2eafc323dbe1abc1a5aef6800e590e69e6f110fcd59317a4fed3ab0b996d11b03c498a9c218ef63ac62db4b6903349b5f456388412083d29c</checksum>
  <summary>Implementation of the IETF QUIC protocol</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000)
with a C library API.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="198777" installed="415487" archive="416184"/>
  <location href="i586/libngtcp2-16-1.22.1-52.3.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28909"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2-16" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2-16(x86-32)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2.so.16"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.25)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2-16</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">4fc486e58ddbff2d9e9fc73bdc60d4f73c605425d60d74871d28211f7ce8fd5b23fe9f59f4f1c4bd8704c8c869e1e422efc20224f9066b230c8a04b25b7e45a6</checksum>
  <summary>Implementation of the IETF QUIC protocol</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000)
with a C library API.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606874" build="1776719509"/>
  <size package="170243" installed="357435" archive="358140"/>
  <location href="x86_64/libngtcp2-16-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28961"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2-16" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2-16(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2.so.16()(64bit)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.25)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2-16-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">34ba561bb4a6c024421c6a59647ca46aa63dff8cf723c26fde92f0b101ba749ddec3cf111924df57cdb10e17ccf9a9b7127f4651e4bf9e7f8d58983c5538f83f</checksum>
  <summary>Implementation of the IETF QUIC protocol</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000)
with a C library API.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="197716" installed="414407" archive="414808"/>
  <location href="x86_64/libngtcp2-16-32bit-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28545"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2-16-32bit" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2-16-32bit(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2.so.16"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.25)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_gnutls-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">a9b0f58fa1cded25253c1afce2a0086927afeec09bcc33c6270ed0f0b81fb4af90a827a6c677b2ae08ad573a4cb7f104b36305c018cd630fd4deda355c087023</checksum>
  <summary>GnuTLS Development files for ngtcp2</summary>
  <description>GnuTLS as TLS backend development files for use with libngtcp2.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="30291" installed="5159" archive="5748"/>
  <location href="i586/libngtcp2_crypto_gnutls-devel-1.22.1-52.3.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28665"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_gnutls-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls-devel(x86-32)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="pkgconfig(libngtcp2_crypto_gnutls)" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8" flags="EQ" epoch="0" ver="1.22.1"/>
      <rpm:entry name="pkgconfig(gnutls)"/>
      <rpm:entry name="pkgconfig(libngtcp2)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_gnutls-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">2e17d032c24dcad9432f12089767a8415544fac2926f2c09f79b77c21cf60c4fe8398f5862089c971615d3aaa7a073531dbeda57dfc366b583fd34196779c434</checksum>
  <summary>GnuTLS Development files for ngtcp2</summary>
  <description>GnuTLS as TLS backend development files for use with libngtcp2.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606874" build="1776719509"/>
  <size package="30296" installed="5161" archive="5756"/>
  <location href="x86_64/libngtcp2_crypto_gnutls-devel-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28665"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_gnutls-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls-devel(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="pkgconfig(libngtcp2_crypto_gnutls)" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8" flags="EQ" epoch="0" ver="1.22.1"/>
      <rpm:entry name="pkgconfig(gnutls)"/>
      <rpm:entry name="pkgconfig(libngtcp2)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_gnutls8</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">e354fbb191a582f315d3121cb89b61cbd22acd21cd7c0fe9dea30b1f59c61e8dcf0fdd7d8404a85c668a0ec00c68126d17541cdb808ca751fecf886ee1df69b6</checksum>
  <summary>The ngtcp2 crypto API with GNUTLS as a backend</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000).
This package contains the crypto API of ngtcp2, which was built using
GNUTLS as the cryptographic provider.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="46861" installed="56492" archive="57244"/>
  <location href="i586/libngtcp2_crypto_gnutls8-1.22.1-52.3.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="29285"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_gnutls.so.8"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8(x86-32)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libgnutls.so.30"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_4)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_6_13)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_7_0)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_7_2)"/>
      <rpm:entry name="libngtcp2.so.16"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_gnutls8</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">f5d8f8c7ac0ee79c0f8babb86279fdcded19da11cc850b06a4260738d7ac45361f1f84869767820bc01b3d942247ff510dc4b09a5372d3a50d4330b1dac5e270</checksum>
  <summary>The ngtcp2 crypto API with GNUTLS as a backend</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000).
This package contains the crypto API of ngtcp2, which was built using
GNUTLS as the cryptographic provider.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606874" build="1776719509"/>
  <size package="45917" installed="54560" archive="55312"/>
  <location href="x86_64/libngtcp2_crypto_gnutls8-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="29373"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_gnutls.so.8()(64bit)"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libgnutls.so.30()(64bit)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_4)(64bit)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_6_13)(64bit)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_7_0)(64bit)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_7_2)(64bit)"/>
      <rpm:entry name="libngtcp2.so.16()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.14)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_gnutls8-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">88da00e36a4385f73c536ac58131fa6dab66a42c9cb9618cb7ea3b253d6564e428e8822a397bce3b9002610932fbeba006134e877d12655b3d4d5255960d62cb</checksum>
  <summary>The ngtcp2 crypto API with GNUTLS as a backend</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000).
This package contains the crypto API of ngtcp2, which was built using
GNUTLS as the cryptographic provider.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="45727" installed="55412" archive="55844"/>
  <location href="x86_64/libngtcp2_crypto_gnutls8-32bit-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28901"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_gnutls.so.8"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8-32bit" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8-32bit(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libgnutls.so.30"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_4)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_6_13)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_7_0)"/>
      <rpm:entry name="libgnutls.so.30(GNUTLS_3_7_2)"/>
      <rpm:entry name="libngtcp2.so.16"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_ossl-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">a1ef38d8dba4c9da3b8e709a533a26e388a9a3428c4a500eafe30c14eb06bf35d65a7d2bed05266a5e0d5f14ab8089c93790e3f1d5df513a6811c6500107f401</checksum>
  <summary>OpenSSL Development files for ngtcp2</summary>
  <description>OpenSSL as TLS backend development files for use with libngtcp2.
QUIC protocol.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="30997" installed="7668" archive="8252"/>
  <location href="i586/libngtcp2_crypto_ossl-devel-1.22.1-52.3.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28661"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_ossl-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl-devel(x86-32)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="pkgconfig(libngtcp2_crypto_ossl)" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl0" flags="EQ" epoch="0" ver="1.22.1"/>
      <rpm:entry name="pkgconfig(libngtcp2)"/>
      <rpm:entry name="pkgconfig(openssl)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_ossl-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">27068d04477ba459a745537b145f3aa8ba0e7e8b95cd04c38362686b9d215b0145a6b231eb1615fbeba76c5832da30474f5dbeb057f03074b0906f61afba62bf</checksum>
  <summary>OpenSSL Development files for ngtcp2</summary>
  <description>OpenSSL as TLS backend development files for use with libngtcp2.
QUIC protocol.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606874" build="1776719509"/>
  <size package="31003" installed="7670" archive="8260"/>
  <location href="x86_64/libngtcp2_crypto_ossl-devel-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28661"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_ossl-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl-devel(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="pkgconfig(libngtcp2_crypto_ossl)" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl0" flags="EQ" epoch="0" ver="1.22.1"/>
      <rpm:entry name="pkgconfig(libngtcp2)"/>
      <rpm:entry name="pkgconfig(openssl)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_ossl0</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">ec183881eff42515163615125fbefabddcfe2d29c6f9520063a6c0fb96882ee4787011b93f6f2345ca70c7906739e2efa97d5ed596941c4ba36911ba2b5e7fc6</checksum>
  <summary>The ngtcp2 crypto API with OpenSSL as a backend</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000).
This package contains the crypto API of ngtcp2, which was built using
OpenSSL as the cryptographic provider.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="50470" installed="66766" archive="67512"/>
  <location href="i586/libngtcp2_crypto_ossl0-1.22.1-52.3.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="29249"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_ossl.so.0"/>
      <rpm:entry name="libngtcp2_crypto_ossl0" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl0(x86-32)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libcrypto.so.3"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libngtcp2.so.16"/>
      <rpm:entry name="libssl.so.3"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.5.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_ossl0</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">830856497348e414bfc838908bbb2d45a82cdc24ce9c1d9e3c8b198ebdcccc6b0a21b7ca9e352d77e112631d087953736ec9e29e93b42f5064d37ef0317cdef0</checksum>
  <summary>The ngtcp2 crypto API with OpenSSL as a backend</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000).
This package contains the crypto API of ngtcp2, which was built using
OpenSSL as the cryptographic provider.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606874" build="1776719509"/>
  <size package="49324" installed="69326" archive="70080"/>
  <location href="x86_64/libngtcp2_crypto_ossl0-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="29341"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_ossl.so.0()(64bit)"/>
      <rpm:entry name="libngtcp2_crypto_ossl0" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl0(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libcrypto.so.3()(64bit)"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)(64bit)"/>
      <rpm:entry name="libngtcp2.so.16()(64bit)"/>
      <rpm:entry name="libssl.so.3()(64bit)"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.0.0)(64bit)"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.5.0)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.14)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libngtcp2_crypto_ossl0-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">78dbf22be145ca80f38b8bb6182c308e50dcf8476d3044c47c9794c4fe08d375ca7d3f9c31519e2761f122ba237debff159c6ae403c8230a591637bb0e9b2495</checksum>
  <summary>The ngtcp2 crypto API with OpenSSL as a backend</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000).
This package contains the crypto API of ngtcp2, which was built using
OpenSSL as the cryptographic provider.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="49333" installed="65686" archive="66112"/>
  <location href="x86_64/libngtcp2_crypto_ossl0-32bit-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28869"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2_crypto_ossl.so.0"/>
      <rpm:entry name="libngtcp2_crypto_ossl0-32bit" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl0-32bit(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libcrypto.so.3"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libngtcp2.so.16"/>
      <rpm:entry name="libssl.so.3"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libssl.so.3(OPENSSL_3.5.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtalloc-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">1f48d92157f80ac97f3f7eecf6d5ebfb254159ef9a6a45ebfddc05f9fba14b9ccacf7ab3fe06b432ce57f5161d7df270aa24325d0edfe1ca897cd05c155126e6</checksum>
  <summary>Libraries and Header Files to Develop Programs with talloc2 Support</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.

Libraries and Header Files to Develop Programs with talloc2 Support.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764007" build="1774628010"/>
  <size package="22703" installed="66893" archive="67432"/>
  <location href="i586/libtalloc-devel-2.4.4-19.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8893"/>
    <rpm:provides>
      <rpm:entry name="libtalloc-devel" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc-devel(x86-32)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="pkgconfig(talloc)" flags="EQ" epoch="0" ver="2.4.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4"/>
      <rpm:entry name="pkg-config"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="talloc-man"/>
    </rpm:recommends>
  </format>
</package>
<package type="rpm">
  <name>libtalloc-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">ea023ab3c889264534a150be68b3abdddbd060dfea73d5972146eea071d6ecdce0b8513e94410aec3a5cdb3d7156db93a0acc85ae503edc69efd7466f5d05e1e</checksum>
  <summary>Libraries and Header Files to Develop Programs with talloc2 Support</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.

Libraries and Header Files to Develop Programs with talloc2 Support.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="22716" installed="66895" archive="67440"/>
  <location href="x86_64/libtalloc-devel-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8893"/>
    <rpm:provides>
      <rpm:entry name="libtalloc-devel" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc-devel(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="pkgconfig(talloc)" flags="EQ" epoch="0" ver="2.4.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4"/>
      <rpm:entry name="pkg-config"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="talloc-man"/>
    </rpm:recommends>
  </format>
</package>
<package type="rpm">
  <name>libtalloc2</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">d3399933a18697e3d76280f9a1c584f2e2d22e099097578b1b05fe6b10aa1e5e91422ae8fa3404a6b9cff7e67b2810dca6332e1db4b062b60d8337736c085d3f</checksum>
  <summary>Samba talloc library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.

This package includes the talloc2 library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764007" build="1774628010"/>
  <size package="32446" installed="66606" archive="67008"/>
  <location href="i586/libtalloc2-2.4.4-19.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10513"/>
    <rpm:provides>
      <rpm:entry name="bundled(libreplace)"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.4)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.5)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.6)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.7)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.8)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.1)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.10)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.11)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.12)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.13)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.14)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.15)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.16)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.4)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.5)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.6)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.7)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.8)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.9)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.2.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.1)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.4)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.5)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.1)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.4)"/>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc2(x86-32)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtalloc2</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">e2d949ecb14c00859be5d5e66a64b2fa99ea145390690339d0e0ef1530bced69a803fa1fdd99e6ee0afe18f87c8e57d22877f837b353d8f67ebd2340f2a391ca</checksum>
  <summary>Samba talloc library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.

This package includes the talloc2 library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="30282" installed="51338" archive="51748"/>
  <location href="x86_64/libtalloc2-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10829"/>
    <rpm:provides>
      <rpm:entry name="bundled(libreplace)"/>
      <rpm:entry name="libtalloc.so.2()(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.3)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.4)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.5)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.6)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.7)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.8)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.0)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.1)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.10)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.11)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.12)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.13)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.14)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.15)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.16)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.2)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.3)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.4)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.5)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.6)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.7)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.8)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.9)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.2.0)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.0)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.1)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.2)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.3)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.4)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.5)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.0)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.1)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.2)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.3)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.4)(64bit)"/>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc2(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtalloc2-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">c66b9bd71fbb629d56e29b962523c045c73d3963009af55807d945859abbb71161d83802a572dad58459780a61e9fa1f6ebb4a10fe06008356509c2c99e3b9cf</checksum>
  <summary>Samba talloc library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.

This package includes the talloc2 library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764007" build="1774628010"/>
  <size package="32326" installed="66606" archive="67008"/>
  <location href="x86_64/libtalloc2-32bit-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10393"/>
    <rpm:provides>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.4)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.5)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.6)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.7)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.8)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.1)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.10)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.11)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.12)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.13)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.14)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.15)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.16)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.4)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.5)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.6)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.7)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.8)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.9)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.2.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.1)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.4)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.3.5)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.0)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.1)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.3)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.4.4)"/>
      <rpm:entry name="libtalloc2-32bit" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc2-32bit(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtalloc2-debuginfo</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">e30844b96365ffaccb4e9a9cfeb8b65efd22751c7c8618b664b69caa5d6abc934c288017b77085c2beca6ae0d8307da6de24e64d787ebb76ae9caab10c5b86fc</checksum>
  <summary>Debug information for package libtalloc2</summary>
  <description>This package provides debug information for package libtalloc2.
Debug information is useful when developing applications that use this
package or when debugging this package.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="13921" installed="15194" archive="16520"/>
  <location href="x86_64/libtalloc2-debuginfo-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Debug</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9481"/>
    <rpm:provides>
      <rpm:entry name="debuginfo(build-id)" flags="EQ" epoch="0" ver="c1e016caf1c5b3ab34e56a457bdbee16937338db"/>
      <rpm:entry name="libtalloc2-debuginfo" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc2-debuginfo(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:recommends>
      <rpm:entry name="talloc-debugsource(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:recommends>
  </format>
</package>
<package type="rpm">
  <name>libtalloc2-x86-64-v3</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">76b605c5e994f279feb438662a60f33e973ad84e7d7871486617450cf3aeec3c632964f97a6088189474de9a89084d2fa0af96695c3ed797bac2b0d0f3977805</checksum>
  <summary>Samba talloc library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.

This package includes the talloc2 library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="28423" installed="51338" archive="51788"/>
  <location href="x86_64/libtalloc2-x86-64-v3-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8765"/>
    <rpm:provides>
      <rpm:entry name="libtalloc2-x86-64-v3" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc2-x86-64-v3(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:requires>
    <rpm:supplements>
      <rpm:entry name="(libtalloc2 = 2.4.4 and patterns-glibc-hwcaps-x86_64_v3)"/>
    </rpm:supplements>
  </format>
</package>
<package type="rpm">
  <name>libtalloc2-x86-64-v3-debuginfo</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">9683239918eb4b327d8118bdd449c409186aa249ff59a8b7e9336b0ac060b9e8ff078ec0828bfbafef1128bfa2b9e0215f34a091fbcabecb2a788e70cbc54ed3</checksum>
  <summary>Debug information for package libtalloc2</summary>
  <description>This package provides debug information for package libtalloc2.
Debug information is useful when developing applications that use this
package or when debugging this package.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="13568" installed="15088" archive="16104"/>
  <location href="x86_64/libtalloc2-x86-64-v3-debuginfo-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Debug</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9201"/>
    <rpm:provides>
      <rpm:entry name="libtalloc2-x86-64-v3-debuginfo" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc2-x86-64-v3-debuginfo(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libtalloc2-debuginfo" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:requires>
    <rpm:supplements>
      <rpm:entry name="(libtalloc2-debuginfo = 2.4.4 and patterns-glibc-hwcaps-x86_64_v3)"/>
    </rpm:supplements>
  </format>
</package>
<package type="rpm">
  <name>libtdb-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">097ebcf7d9a06ced05bb9584c41f58c2228ae3b204a9a5a94caf4e474572b90331a10367ede86d1d745e05a58af04b92360028583920b0a139ea557c2805230c</checksum>
  <summary>Libraries and Header Files to Develop Programs with tdb1 Support</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.

This package contains libraries and header files need for development.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778499073" build="1774728675"/>
  <size package="25500" installed="42122" archive="42792"/>
  <location href="i586/libtdb-devel-1.4.15-7.5.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10313"/>
    <rpm:provides>
      <rpm:entry name="libtdb-devel" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="libtdb-devel(x86-32)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="pkgconfig(tdb)" flags="EQ" epoch="0" ver="1.4.15"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libtdb1" flags="EQ" epoch="0" ver="1.4.15"/>
      <rpm:entry name="pkgconfig"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtdb-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">7cb7c41a8a9b300c3cb78abbe12551b789eb86f9c0381ef699a004e9e41aa727aa6ee2881226841f2513a199912382c0a0a999b03e55c7766066e7bf7d8fffa3</checksum>
  <summary>Libraries and Header Files to Develop Programs with tdb1 Support</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.

This package contains libraries and header files need for development.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778498921" build="1774728675"/>
  <size package="25507" installed="42124" archive="42796"/>
  <location href="x86_64/libtdb-devel-1.4.15-7.5.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10317"/>
    <rpm:provides>
      <rpm:entry name="libtdb-devel" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="libtdb-devel(x86-64)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="pkgconfig(tdb)" flags="EQ" epoch="0" ver="1.4.15"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libtdb1" flags="EQ" epoch="0" ver="1.4.15"/>
      <rpm:entry name="pkgconfig"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtdb1</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">0a1142c520d7b65eb4029a513218b46bfebc10bf2fbc17f49c38084f21a02938712454b869204c12fe3308fd1de6e78e437c859664ef1f3f3e9aec95f25bd327</checksum>
  <summary>Samba Trivial Database</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.

This package contains the tdb1 library.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778499073" build="1774728675"/>
  <size package="57453" installed="109780" archive="110176"/>
  <location href="i586/libtdb1-1.4.15-7.5.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12053"/>
    <rpm:provides>
      <rpm:entry name="libtdb.so.1"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.10)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.11)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.12)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.13)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.2)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.3)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.4)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.5)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.6)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.7)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.8)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.9)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.0)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.10)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.11)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.12)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.13)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.14)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.15)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.16)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.17)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.18)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.2)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.3)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.4)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.5)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.6)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.7)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.8)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.9)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.0)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.10)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.11)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.12)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.13)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.14)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.15)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.2)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.3)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.4)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.5)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.6)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.7)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.8)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.9)"/>
      <rpm:entry name="libtdb1" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="libtdb1(x86-32)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtdb1</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">742a8f55a228167ccca2a0752adaf4ac8c8df79525abf9a9a2da0c7436c0206cd3305447a5b4b008a5f2e010f2b6a04187b0d955620856535f810927849bc1c8</checksum>
  <summary>Samba Trivial Database</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.

This package contains the tdb1 library.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778498921" build="1774728675"/>
  <size package="54176" installed="112768" archive="113168"/>
  <location href="x86_64/libtdb1-1.4.15-7.5.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12369"/>
    <rpm:provides>
      <rpm:entry name="libtdb.so.1()(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.10)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.11)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.12)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.13)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.2)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.3)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.4)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.5)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.6)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.7)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.8)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.9)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.0)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.1)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.10)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.11)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.12)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.13)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.14)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.15)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.16)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.17)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.18)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.2)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.3)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.4)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.5)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.6)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.7)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.8)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.9)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.0)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.1)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.10)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.11)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.12)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.13)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.14)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.15)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.2)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.3)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.4)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.5)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.6)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.7)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.8)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.9)(64bit)"/>
      <rpm:entry name="libtdb1" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="libtdb1(x86-64)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtdb1-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">f5a0f1e5818605a7cf29057206df7ab0adfaa7d49a55c4eae87e2f014b8c2c245cca24b5d0428c989a926ffc06e5fd950af4e2681c6702d055f6fd71aed2e933</checksum>
  <summary>Samba Trivial Database</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.

This package contains the tdb1 library.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778499074" build="1774728675"/>
  <size package="57365" installed="109780" archive="110176"/>
  <location href="x86_64/libtdb1-32bit-1.4.15-7.5.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="11965"/>
    <rpm:provides>
      <rpm:entry name="libtdb.so.1"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.10)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.11)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.12)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.13)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.2)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.3)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.4)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.5)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.6)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.7)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.8)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.9)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.0)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.10)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.11)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.12)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.13)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.14)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.15)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.16)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.17)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.18)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.2)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.3)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.4)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.5)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.6)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.7)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.8)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.9)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.0)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.10)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.11)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.12)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.13)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.14)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.15)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.2)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.3)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.4)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.5)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.6)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.7)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.8)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.4.9)"/>
      <rpm:entry name="libtdb1-32bit" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="libtdb1-32bit(x86-64)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtevent-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">19312943eb49becd7ed8fb8a672cf31f04991d9d1c3aa7b2008af4ce5f42b8a9f016b65a9c1c7f3e374aa154490a8df5e19abb425c0031f1ee99fa8340b8bbb8</checksum>
  <summary>Libraries and Header Files to Develop Programs with tevent0 Support</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

Tevent also provide helpers to deal with asynchronous code providing the
tevent_req (tevent request) functions.

This package contains libraries and header files need for development.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764136" build="1760628688"/>
  <size package="28925" installed="99252" archive="99792"/>
  <location href="i586/libtevent-devel-0.17.1-24.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10009"/>
    <rpm:provides>
      <rpm:entry name="libtevent-devel" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="libtevent-devel(x86-32)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="pkgconfig(tevent)" flags="EQ" epoch="0" ver="0.17.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libtalloc-devel" flags="GE" epoch="0" ver="2.4.3"/>
      <rpm:entry name="libtevent0" flags="EQ" epoch="0" ver="0.17.1"/>
      <rpm:entry name="pkg-config"/>
      <rpm:entry name="pkgconfig(talloc)"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="tevent-man"/>
    </rpm:recommends>
  </format>
</package>
<package type="rpm">
  <name>libtevent-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">586dc0ec9f2e73c656b9bdf3f8a605c1fa9364e1413089249282849793b3fba6ddc1ffe0900e87f7f84d39b1e7c23312e276cd29b56ae300e31440c028cd98f4</checksum>
  <summary>Libraries and Header Files to Develop Programs with tevent0 Support</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

Tevent also provide helpers to deal with asynchronous code providing the
tevent_req (tevent request) functions.

This package contains libraries and header files need for development.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764275" build="1760628688"/>
  <size package="28936" installed="99254" archive="99800"/>
  <location href="x86_64/libtevent-devel-0.17.1-24.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10013"/>
    <rpm:provides>
      <rpm:entry name="libtevent-devel" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="libtevent-devel(x86-64)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="pkgconfig(tevent)" flags="EQ" epoch="0" ver="0.17.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libtalloc-devel" flags="GE" epoch="0" ver="2.4.3"/>
      <rpm:entry name="libtevent0" flags="EQ" epoch="0" ver="0.17.1"/>
      <rpm:entry name="pkg-config"/>
      <rpm:entry name="pkgconfig(talloc)"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="tevent-man"/>
    </rpm:recommends>
  </format>
</package>
<package type="rpm">
  <name>libtevent0</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">5d9d20696ef7c1ff23bb47a889ce62686130b9f1bbb93ba76463a008bbcc62cc2e68c1bf5b098d627cce1589956735e9a13354c21894b03cdfa909827779fac8</checksum>
  <summary>Samba tevent Library</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

This package contains the tevent0 library.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764136" build="1760628688"/>
  <size package="54104" installed="115523" archive="115924"/>
  <location href="i586/libtevent0-0.17.1-24.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12193"/>
    <rpm:provides>
      <rpm:entry name="libtevent.so.0"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.2)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.11.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.12.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.12.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.13.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.14.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.14.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.15.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.2)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.17.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.17.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.10)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.11)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.12)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.13)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.14)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.15)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.16)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.17)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.18)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.19)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.20)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.21)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.22)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.23)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.24)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.25)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.26)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.27)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.28)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.29)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.30)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.31)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.32)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.33)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.34)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.35)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.36)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.37)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.38)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.39)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.9)"/>
      <rpm:entry name="libtevent0" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="libtevent0(x86-32)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux.so.2"/>
      <rpm:entry name="ld-linux.so.2(GLIBC_2.3)"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtevent0</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">fded99effa5f76d17b57f3dd4f9d1d58aa6fc296d66244b0e6a8b3312c747ad6f6e78d53c3ed354db9e160b1bc9cd136e0bb880e561d370a3efdb47dd82789e1</checksum>
  <summary>Samba tevent Library</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

This package contains the tevent0 library.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764275" build="1760628688"/>
  <size package="50951" installed="115243" archive="115652"/>
  <location href="x86_64/libtevent0-0.17.1-24.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12545"/>
    <rpm:provides>
      <rpm:entry name="libtevent.so.0()(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.1)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.2)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.11.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.12.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.12.1)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.13.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.14.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.14.1)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.15.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.1)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.2)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.17.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.17.1)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.10)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.11)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.12)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.13)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.14)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.15)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.16)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.17)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.18)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.19)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.20)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.21)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.22)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.23)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.24)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.25)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.26)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.27)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.28)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.29)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.30)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.31)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.32)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.33)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.34)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.35)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.36)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.37)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.38)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.39)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.9)(64bit)"/>
      <rpm:entry name="libtevent0" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="libtevent0(x86-64)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-x86-64.so.2()(64bit)"/>
      <rpm:entry name="ld-linux-x86-64.so.2(GLIBC_2.3)(64bit)"/>
      <rpm:entry name="libtalloc.so.2()(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.0)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libtevent0-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">ada5d189a894ed733e7775c762caa5b78a9effe6ad2562274acca9a65085a6c0c1c4a2c19b937ab2eace8f5dbd359ffaad13591e2cc3563f4e1724cee0ee441e</checksum>
  <summary>Samba tevent Library</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

This package contains the tevent0 library.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764136" build="1760628688"/>
  <size package="53992" installed="115523" archive="115924"/>
  <location href="x86_64/libtevent0-32bit-0.17.1-24.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12081"/>
    <rpm:provides>
      <rpm:entry name="libtevent.so.0"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.10.2)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.11.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.12.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.12.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.13.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.14.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.14.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.15.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.16.2)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.17.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.17.1)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.10)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.11)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.12)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.13)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.14)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.15)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.16)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.17)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.18)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.19)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.20)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.21)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.22)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.23)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.24)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.25)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.26)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.27)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.28)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.29)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.30)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.31)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.32)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.33)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.34)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.35)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.36)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.37)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.38)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.39)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.9)"/>
      <rpm:entry name="libtevent0-32bit" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="libtevent0-32bit(x86-64)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="ld-linux.so.2"/>
      <rpm:entry name="ld-linux.so.2(GLIBC_2.3)"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.1.0)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.43)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>nghttp3</name>
  <arch>src</arch>
  <version epoch="0" ver="1.15.0" rel="31.2"/>
  <checksum type="sha512" pkgid="YES">5bd84ce9e39145428acc012f32f4618c3d524dd0cc0088665c28958b68940add99492c5a80e2418721b99919bf643239d0cf13e3e47dd6f1d0f5a5d28e41513b</checksum>
  <summary>Implementation of Hypertext Transfer Protocol version 3 in C</summary>
  <description>nghttp3 is an implementation of RFC 9114 HTTP/3 mapping over QUIC and
RFC 9204 QPACK in C.</description>
  <packager></packager>
  <url>https://nghttp2.org/nghttp3/</url>
  <time file="1777606824" build="1773225330"/>
  <size package="440607" installed="422816" archive="423592"/>
  <location href="src/nghttp3-1.15.0-31.2.src.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="23656"/>
    <rpm:provides>
      <rpm:entry name="libnghttp3-9" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="nghttp3-devel" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="python-rpm-macros"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>nghttp3-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.15.0" rel="31.2"/>
  <checksum type="sha512" pkgid="YES">4f3e0824cb659b53d3991a42c5314f6c96adde6713aa9e5c1014ec50db347df107e7341b517d7cc513fd929ec3addf18e61117ec512e49c1886240c84fedd170</checksum>
  <summary>Development files for nghttp3</summary>
  <description>Development files for usage with libnghttp3, which implements
Hypertext Transfer Protocol version 3.</description>
  <packager></packager>
  <url>https://nghttp2.org/nghttp3/</url>
  <time file="1777606879" build="1773225330"/>
  <size package="32125" installed="109995" archive="110828"/>
  <location href="i586/nghttp3-devel-1.15.0-31.2.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>nghttp3-1.15.0-31.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="13553"/>
    <rpm:provides>
      <rpm:entry name="libnghttp3-devel" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="nghttp3-devel" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="nghttp3-devel(x86-32)" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="pkgconfig(libnghttp3)" flags="EQ" epoch="0" ver="1.15.0"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libnghttp3-9" flags="EQ" epoch="0" ver="1.15.0"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="libnghttp3-devel" flags="LT" epoch="0" ver="1.15.0" rel="31.2"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>nghttp3-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.15.0" rel="31.2"/>
  <checksum type="sha512" pkgid="YES">d50b0bad1e60194b53830f88bd0b7b5df8d40b07d0d5acf590fc371ee0b7a38bfcd98de955a088b337704dbd03073f9914cc84a4f55e5d0aa1cf83f6f0765cb3</checksum>
  <summary>Development files for nghttp3</summary>
  <description>Development files for usage with libnghttp3, which implements
Hypertext Transfer Protocol version 3.</description>
  <packager></packager>
  <url>https://nghttp2.org/nghttp3/</url>
  <time file="1777606824" build="1773225330"/>
  <size package="32136" installed="109997" archive="110832"/>
  <location href="x86_64/nghttp3-devel-1.15.0-31.2.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>nghttp3-1.15.0-31.2.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="13561"/>
    <rpm:provides>
      <rpm:entry name="libnghttp3-devel" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="nghttp3-devel" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="nghttp3-devel(x86-64)" flags="EQ" epoch="0" ver="1.15.0" rel="31.2"/>
      <rpm:entry name="pkgconfig(libnghttp3)" flags="EQ" epoch="0" ver="1.15.0"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libnghttp3-9" flags="EQ" epoch="0" ver="1.15.0"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="libnghttp3-devel" flags="LT" epoch="0" ver="1.15.0" rel="31.2"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>ngtcp2</name>
  <arch>src</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">a78554e48133c676769b094e92de05c79f9e5295d5f557088bdc4c426fbd3ad9b7d57c7668dfdc68ea4c618236d2172f4f664fa9e8fa6c43d8b0e4bdfcf2e925</checksum>
  <summary>Implementation of the IETF QUIC protocol</summary>
  <description>ngtcp2 is an implementation of the QUIC protocol (RFC 9000)
with a C library API.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606874" build="1776719509"/>
  <size package="764625" installed="725392" archive="726168"/>
  <location href="src/ngtcp2-1.22.1-52.3.src.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="56820"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2-16" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls8" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl0" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="ngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_gnutls-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="libngtcp2_crypto_ossl-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="gcc-c++"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="pkgconfig(gnutls)" flags="GE" epoch="0" ver="3"/>
      <rpm:entry name="pkgconfig(libnghttp3)" flags="GE" epoch="0" ver="1.12.0"/>
      <rpm:entry name="pkgconfig(openssl)"/>
      <rpm:entry name="python-rpm-macros"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>ngtcp2-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">87734d5c4feefe6f7f79bccb9e325c2f656776619e6a4c7ef2e16db3e784e140d2ac32e87e8b2a8c0afb8ba7b6fbd3f5e6bccde9cc3d32353c8c207e85adfc52</checksum>
  <summary>Development files for ngtcp2</summary>
  <description>Development files for use with libngtcp2, which implements the
QUIC protocol.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606998" build="1776719509"/>
  <size package="68432" installed="268360" archive="269336"/>
  <location href="i586/ngtcp2-devel-1.22.1-52.3.i586.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28917"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="ngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="ngtcp2-devel(x86-32)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="pkgconfig(libngtcp2)" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libngtcp2-16" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="libngtcp2-devel" flags="LT" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>ngtcp2-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.22.1" rel="52.3"/>
  <checksum type="sha512" pkgid="YES">ec2af3b7cbe141ac562d18972013d55571c707774d10d0abbd2185a95ff4c5bcde3d275ef316b52cddbbe01264182262d0180990f7c8f22585a9712186d3bba1</checksum>
  <summary>Development files for ngtcp2</summary>
  <description>Development files for use with libngtcp2, which implements the
QUIC protocol.</description>
  <packager></packager>
  <url>https://nghttp2.org/ngtcp2</url>
  <time file="1777606874" build="1776719509"/>
  <size package="68437" installed="268362" archive="269340"/>
  <location href="x86_64/ngtcp2-devel-1.22.1-52.3.x86_64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>ngtcp2-1.22.1-52.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="28917"/>
    <rpm:provides>
      <rpm:entry name="libngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="ngtcp2-devel" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="ngtcp2-devel(x86-64)" flags="EQ" epoch="0" ver="1.22.1" rel="52.3"/>
      <rpm:entry name="pkgconfig(libngtcp2)" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="libngtcp2-16" flags="EQ" epoch="0" ver="1.22.1"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="libngtcp2-devel" flags="LT" epoch="0" ver="1.22.1" rel="52.3"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>pam_cifscreds</name>
  <arch>i586</arch>
  <version epoch="0" ver="7.4" rel="4.5"/>
  <checksum type="sha512" pkgid="YES">7cf885dd1a234fa3d0792d2645c218b54f1fb82fe8b12a73792570d84caf524d3510b77a23dc6bf1ce7c51eac1d4529a7b136ee8e3293725ef0a6cf7557b5017</checksum>
  <summary>PAM module to manage NTLM credentials in kernel keyring</summary>
  <description>The pam_cifscreds PAM module is a tool for automatically adding
credentials (username and password) for the purpose of establishing
sessions in multiuser mounts.

When a cifs filesystem is mounted with the "multiuser" option, and does
not use krb5 authentication, it needs to be able to get the credentials
for each user from somewhere. The pam_cifscreds module can be used to
provide these credentials to the kernel automatically at login.</description>
  <packager></packager>
  <url>http://www.samba.org/linux-cifs/cifs-utils/</url>
  <time file="1777764508" build="1749632624"/>
  <size package="28041" installed="35375" archive="35800"/>
  <location href="i586/pam_cifscreds-7.4-4.5.i586.rpm"/>
  <format>
    <rpm:license>GPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cifs-utils-7.4-4.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="13765"/>
    <rpm:provides>
      <rpm:entry name="pam_cifscreds" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="pam_cifscreds(x86-32)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libkeyutils.so.1"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_0.3)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.0)"/>
      <rpm:entry name="libpam.so.0"/>
      <rpm:entry name="libpam.so.0(LIBPAM_1.0)"/>
      <rpm:entry name="libpam.so.0(LIBPAM_EXTENSION_1.0)"/>
      <rpm:entry name="libresolv.so.2"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>pam_cifscreds</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="7.4" rel="4.5"/>
  <checksum type="sha512" pkgid="YES">1e3aa999f0a19fb2ec9d038632d32c5a37a66598b6bdb93497865b4d5f983396a6409f39f5606c723a0d29a82fd1fc92520fa10196583ce463cdbd77f4a91242</checksum>
  <summary>PAM module to manage NTLM credentials in kernel keyring</summary>
  <description>The pam_cifscreds PAM module is a tool for automatically adding
credentials (username and password) for the purpose of establishing
sessions in multiuser mounts.

When a cifs filesystem is mounted with the "multiuser" option, and does
not use krb5 authentication, it needs to be able to get the credentials
for each user from somewhere. The pam_cifscreds module can be used to
provide these credentials to the kernel automatically at login.</description>
  <packager></packager>
  <url>http://www.samba.org/linux-cifs/cifs-utils/</url>
  <time file="1777764345" build="1749632624"/>
  <size package="27282" installed="41051" archive="41476"/>
  <location href="x86_64/pam_cifscreds-7.4-4.5.x86_64.rpm"/>
  <format>
    <rpm:license>GPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cifs-utils-7.4-4.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="13857"/>
    <rpm:provides>
      <rpm:entry name="pam_cifscreds" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
      <rpm:entry name="pam_cifscreds(x86-64)" flags="EQ" epoch="0" ver="7.4" rel="4.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libkeyutils.so.1()(64bit)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_0.3)(64bit)"/>
      <rpm:entry name="libkeyutils.so.1(KEYUTILS_1.0)(64bit)"/>
      <rpm:entry name="libpam.so.0()(64bit)"/>
      <rpm:entry name="libpam.so.0(LIBPAM_1.0)(64bit)"/>
      <rpm:entry name="libpam.so.0(LIBPAM_EXTENSION_1.0)(64bit)"/>
      <rpm:entry name="libresolv.so.2()(64bit)"/>
      <rpm:entry name="libresolv.so.2(GLIBC_2.9)(64bit)"/>
      <rpm:entry name="libtalloc.so.2()(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">873ac51ef50436f5fd3372fb157f3ba68fb9cb8cb52211c61655ba1d4aa1a7d6a3ab658348a986b979583ccc6d872c91578031a6f1a1e3ce8ce9a1abb4ed83c5</checksum>
  <summary>Python3 bindings for the Talloc library</summary>
  <description>This package contains the Python3 bindings for the Talloc library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764007" build="1774628010"/>
  <size package="20791" installed="38280" archive="38936"/>
  <location href="i586/python3-talloc-2.4.4-19.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12385"/>
    <rpm:provides>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL.CPYTHON_313_I386_LINUX_GNU_2.4.4)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.0.6)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.0.7)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.0.8)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.1)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.10)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.11)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.12)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.13)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.14)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.15)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.16)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.2)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.3)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.4)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.5)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.6)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.7)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.8)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.9)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.2.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.1)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.2)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.3)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.4)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.5)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.1)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.2)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.3)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.4)"/>
      <rpm:entry name="python3-talloc" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc(x86-32)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libpython3.13.so.1.0"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-talloc"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">c00f696e851505721d64599d4e6190ec02936840871c72d5a83ff47a683d9410382337c5e038aac69085edc63d4d8c4994b1634a81f70b1d1102ad6b5d42c82f</checksum>
  <summary>Python3 bindings for the Talloc library</summary>
  <description>This package contains the Python3 bindings for the Talloc library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="19480" installed="34558" archive="35228"/>
  <location href="x86_64/python3-talloc-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12725"/>
    <rpm:provides>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2()(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL.CPYTHON_313_X86_64_LINUX_GNU_2.4.4)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.0.6)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.0.7)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.0.8)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.0)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.1)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.10)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.11)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.12)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.13)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.14)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.15)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.16)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.2)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.3)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.4)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.5)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.6)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.7)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.8)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.1.9)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.2.0)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.3.0)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.3.1)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.3.2)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.3.3)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.3.4)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.3.5)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.4.0)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.4.1)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.4.2)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.4.3)(64bit)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-x86_64-linux-gnu.so.2(PYTALLOC_UTIL_2.4.4)(64bit)"/>
      <rpm:entry name="python3-talloc" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libpython3.13.so.1.0()(64bit)"/>
      <rpm:entry name="libtalloc.so.2()(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)(64bit)"/>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)(64bit)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-talloc"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">e5e20cfce1c7ad88196c8aa0e671fc2792c25261b145a9f35dba03383ed7d514948a62d9bbfc3ba88934d6e8cbbf2c16c6f0d0b61989fa18e0f644debd1dbeb5</checksum>
  <summary>Python3 bindings for the Talloc library</summary>
  <description>This package contains the Python3 bindings for the Talloc library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764007" build="1774628010"/>
  <size package="20809" installed="38280" archive="39216"/>
  <location href="x86_64/python3-talloc-32bit-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12377"/>
    <rpm:provides>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL.CPYTHON_313_I386_LINUX_GNU_2.4.4)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.0.6)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.0.7)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.0.8)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.1)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.10)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.11)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.12)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.13)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.14)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.15)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.16)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.2)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.3)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.4)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.5)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.6)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.7)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.8)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.1.9)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.2.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.1)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.2)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.3)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.4)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.3.5)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.0)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.1)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.2)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.3)"/>
      <rpm:entry name="libpytalloc-util.cpython-313-i386-linux-gnu.so.2(PYTALLOC_UTIL_2.4.4)"/>
      <rpm:entry name="python3-talloc-32bit" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc-32bit(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libpython3.13.so.1.0"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc-debuginfo</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">7b2bde76cba5d894fcd56d8283f9adee367e9096d97ec4763e39e06b9be33e3005b5ffc8cbb0b5fcd05688f7616eff2c24457e0f036d3e9f759b955cabfb6d2f</checksum>
  <summary>Debug information for package python3-talloc</summary>
  <description>This package provides debug information for package python3-talloc.
Debug information is useful when developing applications that use this
package or when debugging this package.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="23129" installed="34190" archive="36576"/>
  <location href="x86_64/python3-talloc-debuginfo-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Debug</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10717"/>
    <rpm:provides>
      <rpm:entry name="debuginfo(build-id)" flags="EQ" epoch="0" ver="3fd352cdc3d245b772746bc8237a1cd39ed1bc88"/>
      <rpm:entry name="debuginfo(build-id)" flags="EQ" epoch="0" ver="d906dfb9d6948b3ecbaa7fdb42b662c29a1a0c60"/>
      <rpm:entry name="python3-talloc-debuginfo" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc-debuginfo(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:recommends>
      <rpm:entry name="talloc-debugsource(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:recommends>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc-devel</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">be5655c775734326803f0f05e724f24781464cd830b3a3a443c52f28d354643d3a766c6e70c95d24781df3f92bed469d9877f8fc651e025e299554fe2875b950</checksum>
  <summary>Developer tools for the Talloc library</summary>
  <description>Libraries and Header Files to Develop Programs with python3-talloc Support</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764007" build="1774628010"/>
  <size package="10425" installed="3922" archive="4544"/>
  <location href="i586/python3-talloc-devel-2.4.4-19.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8917"/>
    <rpm:provides>
      <rpm:entry name="pkgconfig(pytalloc-util.cpython-313-i386-linux-gnu)" flags="EQ" epoch="0" ver="2.4.4"/>
      <rpm:entry name="python3-talloc-devel" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc-devel(x86-32)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="pkg-config"/>
      <rpm:entry name="python3-talloc" flags="EQ" epoch="0" ver="2.4.4"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-talloc-devel"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc-devel</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">fbb66ae04a33ec91f4bcadf8c1131907f676202f140e9d57544da5cc4977cf78920714bf0215054a66a3a8e9c9e6ff6ca0d2f90d830519fcb973877803c469a1</checksum>
  <summary>Developer tools for the Talloc library</summary>
  <description>Libraries and Header Files to Develop Programs with python3-talloc Support</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="10441" installed="3930" archive="4560"/>
  <location href="x86_64/python3-talloc-devel-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8925"/>
    <rpm:provides>
      <rpm:entry name="pkgconfig(pytalloc-util.cpython-313-x86_64-linux-gnu)" flags="EQ" epoch="0" ver="2.4.4"/>
      <rpm:entry name="python3-talloc-devel" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc-devel(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/pkg-config"/>
      <rpm:entry name="pkg-config"/>
      <rpm:entry name="python3-talloc" flags="EQ" epoch="0" ver="2.4.4"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-talloc-devel"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc-x86-64-v3</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">b48fd2f9d8a00633e5991b5aa0e43477f4e7e3aa66de057c3f1b02d0098ec747f91b8f38b09045dba81b4575868817ec60c7fe5a61202d69396899d669a32f61</checksum>
  <summary>Python3 bindings for the Talloc library</summary>
  <description>This package contains the Python3 bindings for the Talloc library.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="16041" installed="34558" archive="35620"/>
  <location href="x86_64/python3-talloc-x86-64-v3-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9353"/>
    <rpm:provides>
      <rpm:entry name="python3-talloc-x86-64-v3" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc-x86-64-v3(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="python3-talloc" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:requires>
    <rpm:supplements>
      <rpm:entry name="(python3-talloc = 2.4.4 and patterns-glibc-hwcaps-x86_64_v3)"/>
    </rpm:supplements>
  </format>
</package>
<package type="rpm">
  <name>python3-talloc-x86-64-v3-debuginfo</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">c9482d284d334d60ed707b59f61425a15449b7657914fd64cfed9e0cf177c70b41ea2b432c611f14f01395b700383e79ebd040b93f26646fbee70a7a49007f7d</checksum>
  <summary>Debug information for package python3-talloc</summary>
  <description>This package provides debug information for package python3-talloc.
Debug information is useful when developing applications that use this
package or when debugging this package.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="22103" installed="33800" archive="35440"/>
  <location href="x86_64/python3-talloc-x86-64-v3-debuginfo-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Debug</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9845"/>
    <rpm:provides>
      <rpm:entry name="python3-talloc-x86-64-v3-debuginfo" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc-x86-64-v3-debuginfo(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="python3-talloc-debuginfo" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:requires>
    <rpm:supplements>
      <rpm:entry name="(python3-talloc-debuginfo = 2.4.4 and patterns-glibc-hwcaps-x86_64_v3)"/>
    </rpm:supplements>
  </format>
</package>
<package type="rpm">
  <name>python3-tdb</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">5e89b2716f215790e0249da61df3908aa202f63bfa7e5af1150731a3962476bed518d2350fd3ac287195619855f78c73cdfc7cce56e818be54a2f9cb8cb28d5b</checksum>
  <summary>Python3 bindings for the Tdb library</summary>
  <description>This package contains the Python3 bindings for the Tdb library.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778499074" build="1774728675"/>
  <size package="21124" installed="39574" archive="40040"/>
  <location href="i586/python3-tdb-1.4.15-7.5.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10093"/>
    <rpm:provides>
      <rpm:entry name="python3-tdb" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="python3-tdb(x86-32)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libtdb.so.1"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.11)"/>
      <rpm:entry name="libtdb1" flags="EQ" epoch="0" ver="1.4.15"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-tdb"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-tdb</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">81ab72c43994a27ba0b4236e8c172143fd7424b93de7f60b759b026cfaeaaccb1de7c464b7b30f6eb15f46c6212a94658fc38313573636885d156304ea55eb29</checksum>
  <summary>Python3 bindings for the Tdb library</summary>
  <description>This package contains the Python3 bindings for the Tdb library.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778498921" build="1774728675"/>
  <size package="21033" installed="46670" archive="47140"/>
  <location href="x86_64/python3-tdb-1.4.15-7.5.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10109"/>
    <rpm:provides>
      <rpm:entry name="python3-tdb" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="python3-tdb(x86-64)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libtdb.so.1()(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.11)(64bit)"/>
      <rpm:entry name="libtdb1" flags="EQ" epoch="0" ver="1.4.15"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)(64bit)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-tdb"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-tdb-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">d36e2b6a57a42c58ada43edf5c1c1795738b4d7e1ca1caf15fea7b439e0c8c17217b4076822062381c6e4b7a72c9d087430c36600c310b598b06373851fb673f</checksum>
  <summary>Python3 bindings for the Tdb library</summary>
  <description>This package contains the Python3 bindings for the Tdb library.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778499074" build="1774728675"/>
  <size package="20233" installed="36336" archive="36920"/>
  <location href="x86_64/python3-tdb-32bit-1.4.15-7.5.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10025"/>
    <rpm:provides>
      <rpm:entry name="python3-tdb-32bit" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="python3-tdb-32bit(x86-64)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libtdb.so.1"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.3.11)"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python3-tevent</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">79f9950714ca16350a09c0dddaa5c5f8cfb4bf1e769282cac6d3c45c789912ad5026b116bcc249b63849cc76d6a2baff4da07ff82c9bf2d79598e3690bab5819</checksum>
  <summary>Python3 bindings for the Tevent library</summary>
  <description>This package contains the python bindings for the Tevent library.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764136" build="1760628688"/>
  <size package="18678" installed="33880" archive="34344"/>
  <location href="i586/python3-tevent-0.17.1-24.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9981"/>
    <rpm:provides>
      <rpm:entry name="python3-tevent" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="python3-tevent(x86-32)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libtevent.so.0"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.15.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.9)"/>
      <rpm:entry name="libtevent0" flags="EQ" epoch="0" ver="0.17.1"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-tevent"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-tevent</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">a1649606e42ee86e86acc029bec9282c5767ae10e1ef6142e8d59f7f7f58bddb59afe64f5118291176a4dae6e2c0a757779879a333d7c2edfb1cb81fd9b16514</checksum>
  <summary>Python3 bindings for the Tevent library</summary>
  <description>This package contains the python bindings for the Tevent library.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764275" build="1760628688"/>
  <size package="18615" installed="37180" archive="37652"/>
  <location href="x86_64/python3-tevent-0.17.1-24.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10045"/>
    <rpm:provides>
      <rpm:entry name="python3-tevent" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="python3-tevent(x86-64)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="libtalloc.so.2()(64bit)"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)(64bit)"/>
      <rpm:entry name="libtevent.so.0()(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.15.0)(64bit)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.9)(64bit)"/>
      <rpm:entry name="libtevent0" flags="EQ" epoch="0" ver="0.17.1"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)(64bit)"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python-tevent"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python3-tevent-32bit</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">cd31528ba2ecbce27d424af7cb6b2447311bad59f236f54d71dd40f933c75d0b56db3685320604cb825c2121d7a295a18d04f34b66ffae222e8fbfd72a27d038</checksum>
  <summary>Python3 bindings for the Tevent library</summary>
  <description>This package contains the python bindings for the Tevent library.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764136" build="1760628688"/>
  <size package="17928" installed="32884" archive="33472"/>
  <location href="x86_64/python3-tevent-32bit-0.17.1-24.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9797"/>
    <rpm:provides>
      <rpm:entry name="python3-tevent-32bit" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="python3-tevent-32bit(x86-64)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="libtalloc.so.2"/>
      <rpm:entry name="libtalloc.so.2(TALLOC_2.0.2)"/>
      <rpm:entry name="libtevent.so.0"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.15.0)"/>
      <rpm:entry name="libtevent.so.0(TEVENT_0.9.9)"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="libc.so.6(GLIBC_2.4)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>talloc</name>
  <arch>src</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">7436a91088170ced061b8ba3bf1c5a3bf78eb45d95f4247f48ac3efa1a1ea7617add0fdd860440709c1de74db6c4606dffb5040592955a5bffa10f6c840c6167</checksum>
  <summary>Samba talloc Library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="728016" installed="706578" archive="707500"/>
  <location href="src/talloc-2.4.4-19.3.src.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="33480"/>
    <rpm:provides>
      <rpm:entry name="libtalloc2" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="libtalloc-devel" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="python3-talloc-devel" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="talloc-debuginfo" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="talloc-debugsource" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="docbook-xsl-stylesheets"/>
      <rpm:entry name="libxslt"/>
      <rpm:entry name="pkg-config"/>
      <rpm:entry name="python3-base"/>
      <rpm:entry name="python3-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>talloc-debugsource</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">6f590a90b4e93c04704d9960651ed34dee356355d59d28804caad2020a993856e0c0a5faddda6ae33a53329836a14f6fd44f0ea5332038df4b334465f2fa1d44</checksum>
  <summary>Debug sources for package talloc</summary>
  <description>This package provides debug sources for package talloc.
Debug sources are useful when developing applications that use this
package or when debugging this package.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1777764181" build="1774628010"/>
  <size package="24585" installed="79190" archive="80372"/>
  <location href="x86_64/talloc-debugsource-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Debug</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8969"/>
    <rpm:provides>
      <rpm:entry name="talloc-debugsource" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="talloc-debugsource(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <file type="dir">/usr/src/debug/talloc-2.4.4/bin/default</file>
  </format>
</package>
<package type="rpm">
  <name>talloc-man</name>
  <arch>i586</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">640f6fcddc4657c0f5b9ae1a0a2f5ce94f7cd1d0e5b1a5663b2e0b91351585f2b4445ec56262dde5807c5735310c2eccdd24c16c3733ba3c798b34c61700683c</checksum>
  <summary>Samba talloc Library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1778498896" build="1774628010"/>
  <size package="43760" installed="30883" archive="33180"/>
  <location href="i586/talloc-man-2.4.4-19.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-man-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12577"/>
    <rpm:provides>
      <rpm:entry name="talloc-man" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="talloc-man(x86-32)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
  </format>
</package>
<package type="rpm">
  <name>talloc-man</name>
  <arch>src</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">3886512aaf9d41629be2dbc2833e69f7b345ae2e735171f20eb91ba6d80dca8f180fcc27147e8773178a5f43eb6217037b9a899735a54c447685140431f3d0a1</checksum>
  <summary>Samba talloc Library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1778498896" build="1774628010"/>
  <size package="723084" installed="706346" archive="707272"/>
  <location href="src/talloc-man-2.4.4-19.3.src.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="28509"/>
    <rpm:provides>
      <rpm:entry name="talloc-man" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="doxygen"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>talloc-man</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="2.4.4" rel="19.3"/>
  <checksum type="sha512" pkgid="YES">d59e3b7f3ffe594c44e22a14aeec6329801f7f2699e44c3dbc2944f4db6c201b2cb703dce698f3437341441db24dc2ed5166f5ef8c53d4a29fc399c80bba941d</checksum>
  <summary>Samba talloc Library</summary>
  <description>Talloc is a hierarchical, reference counted memory pool system with
destructors.

It is the core memory allocator used in Samba.</description>
  <packager></packager>
  <url>http://talloc.samba.org/</url>
  <time file="1778498862" build="1774628010"/>
  <size package="43756" installed="30883" archive="33180"/>
  <location href="x86_64/talloc-man-2.4.4-19.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>talloc-man-2.4.4-19.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12573"/>
    <rpm:provides>
      <rpm:entry name="talloc-man" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
      <rpm:entry name="talloc-man(x86-64)" flags="EQ" epoch="0" ver="2.4.4" rel="19.3"/>
    </rpm:provides>
  </format>
</package>
<package type="rpm">
  <name>tdb</name>
  <arch>src</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">b57467d091a99564e01162305bfca907c94a51d3fdfa3f2c63d8e8110b67a1bd5783abe90f9dde437a221561634bda2e2d01b1229d264e8accfa5248755edeed</checksum>
  <summary>Samba Trivial Database</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778499074" build="1774728675"/>
  <size package="803435" installed="779142" archive="780164"/>
  <location href="src/tdb-1.4.15-7.5.src.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="39721"/>
    <rpm:provides>
      <rpm:entry name="libtdb1" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="libtdb-devel" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="tdb-tools" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="python3-tdb" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="docbook-xsl-stylesheets"/>
      <rpm:entry name="doxygen"/>
      <rpm:entry name="libxslt"/>
      <rpm:entry name="pkgconfig"/>
      <rpm:entry name="python3-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>tdb-tools</name>
  <arch>i586</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">26dbd4c60771e8423cf59199267cbce14999389bdcbdc76d0fbbc9e3ec47522c045c2481e50d4d75c5c8d92984a5d3c839e66731aeae108a6d06dd1964e48d43</checksum>
  <summary>Tools to manipulate tdb files</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.

This package contains tools to manage Tdb files.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778499074" build="1774728675"/>
  <size package="35161" installed="78596" archive="79828"/>
  <location href="i586/tdb-tools-1.4.15-7.5.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12389"/>
    <rpm:provides>
      <rpm:entry name="tdb-tools" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="tdb-tools(x86-32)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libtdb.so.1"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.11)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.9)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <file>/usr/bin/tdbbackup</file>
    <file>/usr/bin/tdbdump</file>
    <file>/usr/bin/tdbrestore</file>
    <file>/usr/bin/tdbtool</file>
  </format>
</package>
<package type="rpm">
  <name>tdb-tools</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="1.4.15" rel="7.5"/>
  <checksum type="sha512" pkgid="YES">30f27c9378fc1804fe75999979f983b8e21169e446009464e0cbd425c755e04dc6fe10f0d62ecbd6ada173cceec6cb73a7b64cd73d6764b4049ddae5d6dc6d4f</checksum>
  <summary>Tools to manipulate tdb files</summary>
  <description>TDB is a Trivial Database. In concept, it is very much like GDBM, and BSD's DB,
except that it allows multiple simultaneous writers and uses locking
internally to keep writers from trampling on each other.

This package contains tools to manage Tdb files.</description>
  <packager></packager>
  <url>https://tdb.samba.org/</url>
  <time file="1778498921" build="1774728675"/>
  <size package="34948" installed="92004" archive="93236"/>
  <location href="x86_64/tdb-tools-1.4.15-7.5.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tdb-1.4.15-7.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12405"/>
    <rpm:provides>
      <rpm:entry name="tdb-tools" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
      <rpm:entry name="tdb-tools(x86-64)" flags="EQ" epoch="0" ver="1.4.15" rel="7.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libtdb.so.1()(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.1)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.11)(64bit)"/>
      <rpm:entry name="libtdb.so.1(TDB_1.2.9)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/tdbbackup</file>
    <file>/usr/bin/tdbdump</file>
    <file>/usr/bin/tdbrestore</file>
    <file>/usr/bin/tdbtool</file>
  </format>
</package>
<package type="rpm">
  <name>tevent</name>
  <arch>src</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">b5dfb47d8f3105e2a2725cc7e2840cc48577e87edca42346b831a23d468018f2400fe9f07420fafc6560a844459fbeb930f4ae49e4938002f98790577fcb08a0</checksum>
  <summary>An event system based on the talloc memory management library</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

Tevent also provide helpers to deal with asynchronous code providing the
tevent_req (tevent request) functions.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1777764276" build="1760628688"/>
  <size package="949818" installed="928075" archive="928980"/>
  <location href="src/tevent-0.17.1-24.3.src.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="39014"/>
    <rpm:provides>
      <rpm:entry name="libtevent0" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="libtevent-devel" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="python3-tevent" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libtalloc-devel" flags="GE" epoch="0" ver="2.4.3"/>
      <rpm:entry name="libtirpc-devel"/>
      <rpm:entry name="pkg-config"/>
      <rpm:entry name="pkgconfig(cmocka)" flags="GE" epoch="0" ver="1.1.3"/>
      <rpm:entry name="python3-devel"/>
      <rpm:entry name="python3-talloc" flags="GE" epoch="0" ver="2.4.3"/>
      <rpm:entry name="python3-talloc-devel" flags="GE" epoch="0" ver="2.4.3"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>tevent-man</name>
  <arch>i586</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">40c109014218f36ced152d75969505bb1ef16e8bd3d60c9ac5f494f30a6314acf43129363e75618007e2c9b5696ce1ddb08e4b02516fe6665f4a5e9395586271</checksum>
  <summary>An event system based on the talloc memory management library</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

Tevent also provide helpers to deal with asynchronous code providing the
tevent_req (tevent request) functions.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1778498895" build="1760628688"/>
  <size package="44129" installed="31198" archive="33316"/>
  <location href="i586/tevent-man-0.17.1-24.3.i586.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-man-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12653"/>
    <rpm:provides>
      <rpm:entry name="tevent-man" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="tevent-man(x86-32)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
  </format>
</package>
<package type="rpm">
  <name>tevent-man</name>
  <arch>src</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">9303f55ad322af7615b43cf9bf6c20f07d5b23ffffd22f904c52d969ec422042c6b52aa3af1a4f99cf5f25253f2c1758a6331238373a3b6c024bd3272766078f</checksum>
  <summary>An event system based on the talloc memory management library</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

Tevent also provide helpers to deal with asynchronous code providing the
tevent_req (tevent request) functions.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1778498895" build="1760628688"/>
  <size package="945593" installed="927217" archive="927992"/>
  <location href="src/tevent-man-0.17.1-24.3.src.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="35113"/>
    <rpm:provides>
      <rpm:entry name="tevent-man" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="doxygen"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>tevent-man</name>
  <arch>x86_64</arch>
  <version epoch="0" ver="0.17.1" rel="24.3"/>
  <checksum type="sha512" pkgid="YES">379cc85df3b9482a0792e965670e24ff7285adc17367f505b1c0d3bd387b1c1992850ec74129283a169ebdcd4f4d1a5b8dd4ce24cdafa7725e84232ea63b6252</checksum>
  <summary>An event system based on the talloc memory management library</summary>
  <description>Tevent is an event system based on the talloc memory management library. It
is the core event system used in Samba.

The low level tevent has support for many event types, including timers,
signals, and the classic file descriptor events.

Tevent also provide helpers to deal with asynchronous code providing the
tevent_req (tevent request) functions.</description>
  <packager></packager>
  <url>https://tevent.samba.org/</url>
  <time file="1778498861" build="1760628688"/>
  <size package="44129" installed="31198" archive="33316"/>
  <location href="x86_64/tevent-man-0.17.1-24.3.x86_64.rpm"/>
  <format>
    <rpm:license>LGPL-3.0-or-later</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/home:markusd:samba</rpm:vendor>
    <rpm:group>Development/Libraries/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>tevent-man-0.17.1-24.3.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12653"/>
    <rpm:provides>
      <rpm:entry name="tevent-man" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
      <rpm:entry name="tevent-man(x86-64)" flags="EQ" epoch="0" ver="0.17.1" rel="24.3"/>
    </rpm:provides>
  </format>
</package>
</metadata>