<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="45">
<package pkgid="fe169d9c596fcec3b103f8ebf3a0caf0621e75bb09dbfd6e1793e9199e3da955c6dd041248053923872507d3257bdcc053f8011276c800c3b5c3d782638c2a03" name="libsispmctl0" arch="aarch64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="71f300af3fbdbcdba97e189b115a8f791fcf1400a8f2716fb77728f14fe56983264e72f6fce30e0c024b7ce8614637aed3e078f9a7893ad7e52908706f705f7f" name="libsispmctl0" arch="x86_64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="b1e2de47020cf2a74abc26b404dbce75d440cd3c56ebe1ab9098d2d19ee1bf356be4ab574d8c24169fc2457519b05e0000ceecdcf4c5ad4360a516077d32df61" name="libsispmctl0-debuginfo" arch="aarch64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="32e8429a50ffff39ae040c605011d235a0121b3a6e1bbfcefae16efdeb72034cb9e0e83c44736bedce04bc20273382c412a9b8ec92c208f6ed8c3e89ea82e953" name="libsispmctl0-debuginfo" arch="x86_64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="29f4334d690c1612328dd9798bde4029a6c093c6403d7c919de28e7c6f24ca6a7241f67d2189d3be9433816471fcbe537adf1fe1e884adcd3b99f0dc099c6d88" name="mfgtools" arch="aarch64">
  <version epoch="0" ver="1.5.201" rel="bp161.24.2"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1619697600">- Add first version</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 1.4.224.8</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1662379200">- Update to version 1.4.243.7
- Sort BuildRequiers alphabetically
- Add libzstd-devel to BuildRequiers</changelog>
  <changelog author="Dominique Leuenberger &lt;dimstar@opensuse.org&gt;" date="1681732800">- Add mfgtools-gcc13.patch: Fix build using GCC 13.</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to version 1.5.182.9
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1730376000">- Add tinyxml2-devel to BuildRequiers
- Update to version 1.5.191.0
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Simon Lees &lt;sflees@suse.de&gt;" date="1746619200">- export CMAKE_POLICY_VERSION_MINIMUM="3.5" to ignore cmakes
  minimum version warnings</changelog>
  <changelog author="Christoph G &lt;foss@grueninger.de&gt;" date="1753617600">- update to 1.5.201
  * Support imx943 v2x image container
  * Reduce transfer size to 16k because chipidea usb driver limitation
  * Fix workflow pdf build error
  * Fix workflow arm build fail
- update to 1.5.197
  * Add iMX943 support
- Add upstream patch mfgtools-gcc15.patch for fix compilation with
  GCC 15.</changelog>
</package>
<package pkgid="54b3b292fd2dac6b25bd88924580b9a279ad1fa0fe5b1abeec2e4092049f8fe08cb2a25278229a303415a1158ba447ff625c26edebf4bf80a4fe20eb97bc9216" name="mfgtools" arch="src">
  <version epoch="0" ver="1.5.201" rel="bp161.24.2"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1619697600">- Add first version</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 1.4.224.8</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1662379200">- Update to version 1.4.243.7
- Sort BuildRequiers alphabetically
- Add libzstd-devel to BuildRequiers</changelog>
  <changelog author="Dominique Leuenberger &lt;dimstar@opensuse.org&gt;" date="1681732800">- Add mfgtools-gcc13.patch: Fix build using GCC 13.</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to version 1.5.182.9
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1730376000">- Add tinyxml2-devel to BuildRequiers
- Update to version 1.5.191.0
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Simon Lees &lt;sflees@suse.de&gt;" date="1746619200">- export CMAKE_POLICY_VERSION_MINIMUM="3.5" to ignore cmakes
  minimum version warnings</changelog>
  <changelog author="Christoph G &lt;foss@grueninger.de&gt;" date="1753617600">- update to 1.5.201
  * Support imx943 v2x image container
  * Reduce transfer size to 16k because chipidea usb driver limitation
  * Fix workflow pdf build error
  * Fix workflow arm build fail
- update to 1.5.197
  * Add iMX943 support
- Add upstream patch mfgtools-gcc15.patch for fix compilation with
  GCC 15.</changelog>
</package>
<package pkgid="2547c788f9e8c4d4a45e8a15252b9e7c484e3396c2a2043d882e4aaf8ab7e235b2884efcd2008f5289847c8b22fa9f07b91792354ed607288ee2b85bab8aee95" name="mfgtools" arch="x86_64">
  <version epoch="0" ver="1.5.201" rel="bp161.24.2"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1619697600">- Add first version</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 1.4.224.8</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1662379200">- Update to version 1.4.243.7
- Sort BuildRequiers alphabetically
- Add libzstd-devel to BuildRequiers</changelog>
  <changelog author="Dominique Leuenberger &lt;dimstar@opensuse.org&gt;" date="1681732800">- Add mfgtools-gcc13.patch: Fix build using GCC 13.</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to version 1.5.182.9
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1730376000">- Add tinyxml2-devel to BuildRequiers
- Update to version 1.5.191.0
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Simon Lees &lt;sflees@suse.de&gt;" date="1746619200">- export CMAKE_POLICY_VERSION_MINIMUM="3.5" to ignore cmakes
  minimum version warnings</changelog>
  <changelog author="Christoph G &lt;foss@grueninger.de&gt;" date="1753617600">- update to 1.5.201
  * Support imx943 v2x image container
  * Reduce transfer size to 16k because chipidea usb driver limitation
  * Fix workflow pdf build error
  * Fix workflow arm build fail
- update to 1.5.197
  * Add iMX943 support
- Add upstream patch mfgtools-gcc15.patch for fix compilation with
  GCC 15.</changelog>
</package>
<package pkgid="49902f5497cdeae8c2e068452697dec57f9e8181beae7957a3bd96193446e836c55ebe417db6dac033fa5b7dee374015a6c3de912980e5f6a7662b2a5b38ee5e" name="mfgtools-debuginfo" arch="aarch64">
  <version epoch="0" ver="1.5.201" rel="bp161.24.2"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1619697600">- Add first version</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 1.4.224.8</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1662379200">- Update to version 1.4.243.7
- Sort BuildRequiers alphabetically
- Add libzstd-devel to BuildRequiers</changelog>
  <changelog author="Dominique Leuenberger &lt;dimstar@opensuse.org&gt;" date="1681732800">- Add mfgtools-gcc13.patch: Fix build using GCC 13.</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to version 1.5.182.9
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1730376000">- Add tinyxml2-devel to BuildRequiers
- Update to version 1.5.191.0
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Simon Lees &lt;sflees@suse.de&gt;" date="1746619200">- export CMAKE_POLICY_VERSION_MINIMUM="3.5" to ignore cmakes
  minimum version warnings</changelog>
  <changelog author="Christoph G &lt;foss@grueninger.de&gt;" date="1753617600">- update to 1.5.201
  * Support imx943 v2x image container
  * Reduce transfer size to 16k because chipidea usb driver limitation
  * Fix workflow pdf build error
  * Fix workflow arm build fail
- update to 1.5.197
  * Add iMX943 support
- Add upstream patch mfgtools-gcc15.patch for fix compilation with
  GCC 15.</changelog>
</package>
<package pkgid="6dffc75af9465ff3f46a310d5433d6febdd1507d817d82ed7dafc29c0c9d690236433637cd96e1fc38bf6c637205d4fb7b0b3603c68182918d5b85f7a1a7edac" name="mfgtools-debuginfo" arch="x86_64">
  <version epoch="0" ver="1.5.201" rel="bp161.24.2"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1619697600">- Add first version</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 1.4.224.8</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1662379200">- Update to version 1.4.243.7
- Sort BuildRequiers alphabetically
- Add libzstd-devel to BuildRequiers</changelog>
  <changelog author="Dominique Leuenberger &lt;dimstar@opensuse.org&gt;" date="1681732800">- Add mfgtools-gcc13.patch: Fix build using GCC 13.</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to version 1.5.182.9
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1730376000">- Add tinyxml2-devel to BuildRequiers
- Update to version 1.5.191.0
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Simon Lees &lt;sflees@suse.de&gt;" date="1746619200">- export CMAKE_POLICY_VERSION_MINIMUM="3.5" to ignore cmakes
  minimum version warnings</changelog>
  <changelog author="Christoph G &lt;foss@grueninger.de&gt;" date="1753617600">- update to 1.5.201
  * Support imx943 v2x image container
  * Reduce transfer size to 16k because chipidea usb driver limitation
  * Fix workflow pdf build error
  * Fix workflow arm build fail
- update to 1.5.197
  * Add iMX943 support
- Add upstream patch mfgtools-gcc15.patch for fix compilation with
  GCC 15.</changelog>
</package>
<package pkgid="d34ae7930d5ec9dbd7080543494aaedafeaaa844bdba8ed987f465de6c76f2d3f74ba2982cb0ef06e786d885f88ad384fca31ff7b34ffb2a9944a6bd3a02c36f" name="mfgtools-debugsource" arch="aarch64">
  <version epoch="0" ver="1.5.201" rel="bp161.24.2"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1619697600">- Add first version</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 1.4.224.8</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1662379200">- Update to version 1.4.243.7
- Sort BuildRequiers alphabetically
- Add libzstd-devel to BuildRequiers</changelog>
  <changelog author="Dominique Leuenberger &lt;dimstar@opensuse.org&gt;" date="1681732800">- Add mfgtools-gcc13.patch: Fix build using GCC 13.</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to version 1.5.182.9
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1730376000">- Add tinyxml2-devel to BuildRequiers
- Update to version 1.5.191.0
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Simon Lees &lt;sflees@suse.de&gt;" date="1746619200">- export CMAKE_POLICY_VERSION_MINIMUM="3.5" to ignore cmakes
  minimum version warnings</changelog>
  <changelog author="Christoph G &lt;foss@grueninger.de&gt;" date="1753617600">- update to 1.5.201
  * Support imx943 v2x image container
  * Reduce transfer size to 16k because chipidea usb driver limitation
  * Fix workflow pdf build error
  * Fix workflow arm build fail
- update to 1.5.197
  * Add iMX943 support
- Add upstream patch mfgtools-gcc15.patch for fix compilation with
  GCC 15.</changelog>
</package>
<package pkgid="92512846d8e3aa15894af2c6c617c1f4f8c0775ee7006169d39db9ef0d64015ce754e6b614e6e1bfca420fd89757040101428a480252c907f73f9028afd5a9d4" name="mfgtools-debugsource" arch="x86_64">
  <version epoch="0" ver="1.5.201" rel="bp161.24.2"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1619697600">- Add first version</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 1.4.224.8</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1662379200">- Update to version 1.4.243.7
- Sort BuildRequiers alphabetically
- Add libzstd-devel to BuildRequiers</changelog>
  <changelog author="Dominique Leuenberger &lt;dimstar@opensuse.org&gt;" date="1681732800">- Add mfgtools-gcc13.patch: Fix build using GCC 13.</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to version 1.5.182.9
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1730376000">- Add tinyxml2-devel to BuildRequiers
- Update to version 1.5.191.0
  - Reduce memory usage when burn single board with compressed Image.
  - Http(s) prompt request username and passwords when require autherization.
  - fix memory leak cause by getaddrinfo.
  - fix crash when environment variable is last word in script
  - Expand upload command, like uploading the value of a specific variable
  - Fix segfault when boot data is zero in SDP.
  - Fix issues when m_skip is not zero in fastboot.
  - Fix issues when file size isn't divisible by block size in fastboot.
  - Fix read uploaded data for FB.
  - static link c++ library in prebuild linux image
  - provide armlinux version image
  - Add built spinand command support
  - parser [-t timeout] for all protocol
  - force use old libusb to run at ubuntu 18.04
  - Increase default timeout to 10s
  - Hot Fixed for SPDS crash for some images
  - Support i.MX95
  - Fixed usb pipe error when download image with FCB
  - Support i.MX91
  - Fixed a crash with -d option when change back file.
  - Fix crash when get serial number at SPL/uboot if no serial_no exist at device descriptor
  - Fix "imx91" device name as "imx93" when -lsusb
  - Add dynamic `g_max_process_width` global variable to handle long lines</changelog>
  <changelog author="Simon Lees &lt;sflees@suse.de&gt;" date="1746619200">- export CMAKE_POLICY_VERSION_MINIMUM="3.5" to ignore cmakes
  minimum version warnings</changelog>
  <changelog author="Christoph G &lt;foss@grueninger.de&gt;" date="1753617600">- update to 1.5.201
  * Support imx943 v2x image container
  * Reduce transfer size to 16k because chipidea usb driver limitation
  * Fix workflow pdf build error
  * Fix workflow arm build fail
- update to 1.5.197
  * Add iMX943 support
- Add upstream patch mfgtools-gcc15.patch for fix compilation with
  GCC 15.</changelog>
</package>
<package pkgid="39d070b2b5dc6969aca19631e7cbf1cb9ce7e9f275e9211d1e4364968657ba5ae9aa51a26fa1396f73ff15e93d3e25a07c107fafc88c3ace3c3dab5416a34dc8" name="microcom" arch="aarch64">
  <version epoch="0" ver="2023.09.0.0" rel="bp161.1.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 2019.01.0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- use source url</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 2019.01.0.8
  * correct cleanup after failing to set speed
  * use flock instead of lockfiles
- add _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- Update to version 2019.01.0.11</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Updat to version 2023.09.0.0
  * use flock(2) instead of POSIX locking
  * A new command sendescape to send a Ctrl-\. This makes it possible to drive a nested microcom instance.
  * Several fixes, e.g. consistently use LFS and improve on rfc2217 subnegotiation handling</changelog>
</package>
<package pkgid="fea5dcd61dc3f92f600a61f4de7b58504e61125283d9292f20a87dba44dd69de6a507c3009e483327f4f9148210d63f24d22b2fb3a6f97ce7208a9708894a28d" name="microcom" arch="src">
  <version epoch="0" ver="2023.09.0.0" rel="bp161.1.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 2019.01.0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- use source url</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 2019.01.0.8
  * correct cleanup after failing to set speed
  * use flock instead of lockfiles
- add _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- Update to version 2019.01.0.11</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Updat to version 2023.09.0.0
  * use flock(2) instead of POSIX locking
  * A new command sendescape to send a Ctrl-\. This makes it possible to drive a nested microcom instance.
  * Several fixes, e.g. consistently use LFS and improve on rfc2217 subnegotiation handling</changelog>
</package>
<package pkgid="3a4a5ea1ed1afd3ba196e0c22b6322d073a1dee77cfa7f9ff1e239eb4297c044e651f415ce8b8304caedbdea66a459e5ba0bb46ca609a2c9deca2df3db4c4dd6" name="microcom" arch="x86_64">
  <version epoch="0" ver="2023.09.0.0" rel="bp161.1.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 2019.01.0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- use source url</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 2019.01.0.8
  * correct cleanup after failing to set speed
  * use flock instead of lockfiles
- add _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- Update to version 2019.01.0.11</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Updat to version 2023.09.0.0
  * use flock(2) instead of POSIX locking
  * A new command sendescape to send a Ctrl-\. This makes it possible to drive a nested microcom instance.
  * Several fixes, e.g. consistently use LFS and improve on rfc2217 subnegotiation handling</changelog>
</package>
<package pkgid="b396d206928e44c35211d7b6e3574bb15ca87d7a3926b8d68558de917087c502d0669412c45b387f2800f8ee190824adfcd72ae08b2a7f485623db6d2e7e2d43" name="microcom-debuginfo" arch="aarch64">
  <version epoch="0" ver="2023.09.0.0" rel="bp161.1.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 2019.01.0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- use source url</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 2019.01.0.8
  * correct cleanup after failing to set speed
  * use flock instead of lockfiles
- add _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- Update to version 2019.01.0.11</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Updat to version 2023.09.0.0
  * use flock(2) instead of POSIX locking
  * A new command sendescape to send a Ctrl-\. This makes it possible to drive a nested microcom instance.
  * Several fixes, e.g. consistently use LFS and improve on rfc2217 subnegotiation handling</changelog>
</package>
<package pkgid="adad0c4459f55828c0b7e6aca08fb74ea9289cb7d5146c405d62b6077857ffd14465eb3e47ec199405a0e388d0556744332881fd1a6c41a759754f987eece1b7" name="microcom-debuginfo" arch="x86_64">
  <version epoch="0" ver="2023.09.0.0" rel="bp161.1.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 2019.01.0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- use source url</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 2019.01.0.8
  * correct cleanup after failing to set speed
  * use flock instead of lockfiles
- add _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- Update to version 2019.01.0.11</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Updat to version 2023.09.0.0
  * use flock(2) instead of POSIX locking
  * A new command sendescape to send a Ctrl-\. This makes it possible to drive a nested microcom instance.
  * Several fixes, e.g. consistently use LFS and improve on rfc2217 subnegotiation handling</changelog>
</package>
<package pkgid="f574ba39dd9d53687ca894850ac96a0788c6d70b23ed84c07fdecf71645dff22c7a3001b737acacdbabbd26555423991cc6045a355150296026660201b792362" name="microcom-debugsource" arch="aarch64">
  <version epoch="0" ver="2023.09.0.0" rel="bp161.1.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 2019.01.0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- use source url</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 2019.01.0.8
  * correct cleanup after failing to set speed
  * use flock instead of lockfiles
- add _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- Update to version 2019.01.0.11</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Updat to version 2023.09.0.0
  * use flock(2) instead of POSIX locking
  * A new command sendescape to send a Ctrl-\. This makes it possible to drive a nested microcom instance.
  * Several fixes, e.g. consistently use LFS and improve on rfc2217 subnegotiation handling</changelog>
</package>
<package pkgid="b857000d6cebec12347d5a0f5b08964514551615405da453d783c2ac894005e97e77e59d887f99ca1526187590bec00d88621c02721ac3a51c4fba811fed5f10" name="microcom-debugsource" arch="x86_64">
  <version epoch="0" ver="2023.09.0.0" rel="bp161.1.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 2019.01.0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- use source url</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- Update to version 2019.01.0.8
  * correct cleanup after failing to set speed
  * use flock instead of lockfiles
- add _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- Update to version 2019.01.0.11</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Updat to version 2023.09.0.0
  * use flock(2) instead of POSIX locking
  * A new command sendescape to send a Ctrl-\. This makes it possible to drive a nested microcom instance.
  * Several fixes, e.g. consistently use LFS and improve on rfc2217 subnegotiation handling</changelog>
</package>
<package pkgid="732dd2b99d87c8aa52069ce7b0361debe5267467c117c73c53fd62818ad078f27afff984fd48036cebba8e7731dcb3726256a9db47702224e66ec74234349af3" name="mlxbf-bootctl" arch="aarch64">
  <version epoch="0" ver="1.1.6.25" rel="bp161.23.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- Add package (jsc#SLE-16098 jsc#SLE-16108)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611835200">- Fix spec file comments</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 1.1.6.14
  * check image version to not install unsupported images</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- update to 1.1.6.25
  * Fix ACPI table read for SSDT table bigger 4KB</changelog>
</package>
<package pkgid="e3161c787f1d51fa0790ba0652a482c2338d6b25b6cdef7fae8337e97e774d9ce37363e24f57957d3427e52ea279fa8e84a87a4456428ee333692ff67ec832e2" name="mlxbf-bootctl" arch="src">
  <version epoch="0" ver="1.1.6.25" rel="bp161.23.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- Add package (jsc#SLE-16098 jsc#SLE-16108)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611835200">- Fix spec file comments</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 1.1.6.14
  * check image version to not install unsupported images</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- update to 1.1.6.25
  * Fix ACPI table read for SSDT table bigger 4KB</changelog>
</package>
<package pkgid="0d03deae15a981236a223861091a5a01f8dd74f9ed14e885c9168bcb04f252bbb1eb2e47df1d76125880cb63fb759d1d5cbdf24e0840a73dc05ca60309ebd7b4" name="mlxbf-bootctl-debuginfo" arch="aarch64">
  <version epoch="0" ver="1.1.6.25" rel="bp161.23.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- Add package (jsc#SLE-16098 jsc#SLE-16108)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611835200">- Fix spec file comments</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 1.1.6.14
  * check image version to not install unsupported images</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- update to 1.1.6.25
  * Fix ACPI table read for SSDT table bigger 4KB</changelog>
</package>
<package pkgid="b1343a2b4ced1871d82212cade287b73a523620716a34f114ec997afa7e0df8a7bac7ce21d45f4194162bc4871d66eec0afabeb3a39f091fe3da016003350834" name="mlxbf-bootctl-debugsource" arch="aarch64">
  <version epoch="0" ver="1.1.6.25" rel="bp161.23.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- Add package (jsc#SLE-16098 jsc#SLE-16108)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611835200">- Fix spec file comments</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 1.1.6.14
  * check image version to not install unsupported images</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- update to 1.1.6.25
  * Fix ACPI table read for SSDT table bigger 4KB</changelog>
</package>
<package pkgid="b01204b96c7902f417aded37cbca6b8f8282b36cfa1817d442ddde7d26ee2ef0e3d2f735550a95fd979c980e5d548aab8e50aa93af23316b3fe16006fe5998cb" name="raspberrypi-rpiboot" arch="aarch64">
  <version epoch="0" ver="20240926.102326.3" rel="bp161.16.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 78 (jsc#64380)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- add source service
- add version c650cd7
  * fix build warning</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591704000">- delete update_git.sh</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- add support for CM4 (jsc#SLE-16895)</changelog>
  <changelog author="Jan Engelhardt &lt;jengelh@inai.de&gt;" date="1611316801">- Generate monotonically increasing Version numbers</changelog>
  <changelog author="Dirk M&#xFC;ller &lt;dmueller@suse.com&gt;" date="1615636800">- remove libusb-compat - it only uses libusb-1.0</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1640088000">- Update to version e5e49940</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Use new version schema &lt;YYYYMMDD&gt;.&lt;HHMMSS&gt;
- Update to version 20240926.102326.3</changelog>
</package>
<package pkgid="9599d0f5bfaaa924329f1b90184d3d05b08d06593d6bf8445a609606ecf769543e4e9cd488b5316926e170189338febf671fc1b946dd381d8c045828c8556f9c" name="raspberrypi-rpiboot" arch="src">
  <version epoch="0" ver="20240926.102326.3" rel="bp161.16.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 78 (jsc#64380)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- add source service
- add version c650cd7
  * fix build warning</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591704000">- delete update_git.sh</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- add support for CM4 (jsc#SLE-16895)</changelog>
  <changelog author="Jan Engelhardt &lt;jengelh@inai.de&gt;" date="1611316801">- Generate monotonically increasing Version numbers</changelog>
  <changelog author="Dirk M&#xFC;ller &lt;dmueller@suse.com&gt;" date="1615636800">- remove libusb-compat - it only uses libusb-1.0</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1640088000">- Update to version e5e49940</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Use new version schema &lt;YYYYMMDD&gt;.&lt;HHMMSS&gt;
- Update to version 20240926.102326.3</changelog>
</package>
<package pkgid="71dfc795191d73502c971b4235ee36c4e0f3dde4b928386a83138065f9bae61e7dfffc7f3a27b241af50781ca8ee0a5ab152b2db11dc566329ba9544e199512a" name="raspberrypi-rpiboot" arch="x86_64">
  <version epoch="0" ver="20240926.102326.3" rel="bp161.16.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 78 (jsc#64380)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- add source service
- add version c650cd7
  * fix build warning</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591704000">- delete update_git.sh</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- add support for CM4 (jsc#SLE-16895)</changelog>
  <changelog author="Jan Engelhardt &lt;jengelh@inai.de&gt;" date="1611316801">- Generate monotonically increasing Version numbers</changelog>
  <changelog author="Dirk M&#xFC;ller &lt;dmueller@suse.com&gt;" date="1615636800">- remove libusb-compat - it only uses libusb-1.0</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1640088000">- Update to version e5e49940</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Use new version schema &lt;YYYYMMDD&gt;.&lt;HHMMSS&gt;
- Update to version 20240926.102326.3</changelog>
</package>
<package pkgid="074fc1be7aba758ddcebe0be8513aaaf1d791348ea7d28057d076634de253c7b4937fb23f56a489cc47cfc96393e0e4d79780f341aa222cb9537a5c86d17b4c1" name="raspberrypi-rpiboot-debuginfo" arch="aarch64">
  <version epoch="0" ver="20240926.102326.3" rel="bp161.16.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 78 (jsc#64380)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- add source service
- add version c650cd7
  * fix build warning</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591704000">- delete update_git.sh</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- add support for CM4 (jsc#SLE-16895)</changelog>
  <changelog author="Jan Engelhardt &lt;jengelh@inai.de&gt;" date="1611316801">- Generate monotonically increasing Version numbers</changelog>
  <changelog author="Dirk M&#xFC;ller &lt;dmueller@suse.com&gt;" date="1615636800">- remove libusb-compat - it only uses libusb-1.0</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1640088000">- Update to version e5e49940</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Use new version schema &lt;YYYYMMDD&gt;.&lt;HHMMSS&gt;
- Update to version 20240926.102326.3</changelog>
</package>
<package pkgid="fdac9d384f58b8c11c5efc4e3dc1621d03378c0a4574b2f5e41c8821f5b52bf70e2465dc4ce9f9279c9aa0f89d1c94aca6bc91b0de87bdb6747abb5b44e7ff3a" name="raspberrypi-rpiboot-debuginfo" arch="x86_64">
  <version epoch="0" ver="20240926.102326.3" rel="bp161.16.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 78 (jsc#64380)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- add source service
- add version c650cd7
  * fix build warning</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591704000">- delete update_git.sh</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- add support for CM4 (jsc#SLE-16895)</changelog>
  <changelog author="Jan Engelhardt &lt;jengelh@inai.de&gt;" date="1611316801">- Generate monotonically increasing Version numbers</changelog>
  <changelog author="Dirk M&#xFC;ller &lt;dmueller@suse.com&gt;" date="1615636800">- remove libusb-compat - it only uses libusb-1.0</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1640088000">- Update to version e5e49940</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Use new version schema &lt;YYYYMMDD&gt;.&lt;HHMMSS&gt;
- Update to version 20240926.102326.3</changelog>
</package>
<package pkgid="b44082b04fa2a212a366a244c64a6031ac2fe29e5eaac3a8c1ce4ed8d311f5d5f6d3c9b187d5cc8fd031fe294b8e9c7ae82b010777b90cf831dff2b1ecc2246d" name="raspberrypi-rpiboot-debugsource" arch="aarch64">
  <version epoch="0" ver="20240926.102326.3" rel="bp161.16.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 78 (jsc#64380)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- add source service
- add version c650cd7
  * fix build warning</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591704000">- delete update_git.sh</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- add support for CM4 (jsc#SLE-16895)</changelog>
  <changelog author="Jan Engelhardt &lt;jengelh@inai.de&gt;" date="1611316801">- Generate monotonically increasing Version numbers</changelog>
  <changelog author="Dirk M&#xFC;ller &lt;dmueller@suse.com&gt;" date="1615636800">- remove libusb-compat - it only uses libusb-1.0</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1640088000">- Update to version e5e49940</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Use new version schema &lt;YYYYMMDD&gt;.&lt;HHMMSS&gt;
- Update to version 20240926.102326.3</changelog>
</package>
<package pkgid="4ff6d17359a5e08023859c192afb408093235895cff2084f26520bcaed1e4f52774bdcda327e2470efad1d7c078d7c928b1f0f46966e72ff7f4ceeb612a68ee6" name="raspberrypi-rpiboot-debugsource" arch="x86_64">
  <version epoch="0" ver="20240926.102326.3" rel="bp161.16.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1588680000">- add version 78 (jsc#64380)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591358400">- add source service
- add version c650cd7
  * fix build warning</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1591704000">- delete update_git.sh</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611316800">- add support for CM4 (jsc#SLE-16895)</changelog>
  <changelog author="Jan Engelhardt &lt;jengelh@inai.de&gt;" date="1611316801">- Generate monotonically increasing Version numbers</changelog>
  <changelog author="Dirk M&#xFC;ller &lt;dmueller@suse.com&gt;" date="1615636800">- remove libusb-compat - it only uses libusb-1.0</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1640088000">- Update to version e5e49940</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Use new version schema &lt;YYYYMMDD&gt;.&lt;HHMMSS&gt;
- Update to version 20240926.102326.3</changelog>
</package>
<package pkgid="80f9251ffaafefc9ad3325b62139b9411b840f6a86758fb28ba06433c1331731377822f879980ba5762f5b4d6931d09bcd056561314cc00c8e2d62f64fc958ef" name="rshim" arch="aarch64">
  <version epoch="0" ver="2.7.1" rel="bp161.10.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1605787200">- update to 2.0.55.1
  * add bfb-install script
- fix version number naming
- add versioning to _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611576000">- fix _service file
- update to 2.0.5.8.3
  * fix various issues
  * add workaround for Bluefield-2 REV-0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1615464000">- update to 2.0.5.10
  * fix possible tmfifo data loss in PCIe interface
  * fix USB deadlock
  * reduce CPU load when no rshim device present
  * add PCIe hotplug support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1632916800">- update to 2.0.6.1.5
  * Disable the background timer if no rshim devices
  * Setting default path for rshim config file
  * Refine when some workarounds should be applied
  * Fix hypervisor crash when several cards boot or push streams
  * Set MTU to standard max size</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1637323200">- update to 2.0.6.2.2
  * bfb-install: Handle new indications for installation completion
  * Make USB reset configurable and set to 3 seconds
  * Move USB reset to USB up event</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- update to 2.0.6.11.5
  * Fix a possible crash on PCIe for BF1/2
  * Fix possible race condition when several rshim devices are present
  * Fix a kernel crash when undbinding from uio
  * Detect new USB/rshim hot plug</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 2.0.6.13.7
  * make use of rshim with several devices more efficient
  * support 32 bit CR space possible on BF3 USB access
  * support more transfer sizes
  * add new device ID for BF3
  * allow to en/disable VFIO/UIO support via rshim.conf
  * make restart of rshim process more robust fixing potential race
  * set default boot timeout to 150 seconds</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1678968000">- update to 2.0.6.19.2
  * fix potential NULL pointer access during USB disconnection
  * fix vfio and direct mapping mode with several devices
  * avoid use of stale cached pci_dev pointer after device reset
  * adjust reset delay
  * update to dual-licensese GPL-2.0/BSD-3-Clause</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1682078400">- Update service to new tag format
- update to 2.0.7
  * adjust reset delay
  * avoid leak the file descriptor for /dev/uio</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1693396800">- Update to 2.0.9
  * Fix fallback logic of direct mapping
  * Make timeout configurable through /dev/rshimX/misc</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1698926400">- Update to 2.0.12.1
  * Display uptime in seconds for BF3
  * Add fuse3 support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1709812800">- Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
  * Adjust delay time for nic_fw reset
  * Add BFB completion condition for enhanced NIC mode
  * Fixes for potential high CPU utilization</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1715342400">- Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
  * Output SECURE_NIC_MODE in /dev/rshim&lt;N&gt;/misc
  * Allow remote installation via bfb-install
  * Make DROP_MODE more robust
  * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
  * Fix handshake between NIC F and rshim over PCIe</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 2.1.5.0
  * Avoid polling blocked status during reset
  * Adjust default reset delay to 3 seconds on PCIe
  * Remove workaround support for BF2 A0 chip
  * Only poll/check locked mode for PCIe backend
  * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
  * add 'CLEAR_ON_READ' command to delete rshim log after read
  * Add ownership transfer feature
  * Allow /dev/rshim&lt;N&gt; devfs creation only with --force option enabled
  * Make sending the initial force command a one-time event
  * Add VFIO support for Bluefield-3 on PCIe
  * Add support for command mode
  * Adjust default boot timeout to 300s
  * Make rshim run in single instance</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1731499200">- Update to 2.1.6.0
  * Add USB_TIMEOUT to rshim misc and conf settings
  * Use BOOT_RESET_SKIP command to simulate eMMC boot</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1738843200">- Update to 2.2.4.0
  * Update default USB timeout
  * Add BF_MODE misc output to show DPU or NIC mode (BF3 only)
  * Allow 0 to restrore USB_TIMEOUT default value
  * Allow multi rshim processes for dev attchment
  * Force stop if stuck during systemd service stop
  * removes unnecesary POLLOUT polling in USB</changelog>
  <changelog author="Andreas Stieger &lt;andreas.stieger@gmx.de&gt;" date="1747224000">- update to 2.3.8:
  * Fix a potentially unintialized variable
- includes changes from 2.3.7:
  * bfb-install: Reactivate NIC_FW for runtime upgrade
- includes changes from 2.3.6:
  * bfb-install: cleanup the TMP_DIR
- includes changes from 2.3.5:
  * bfb-install: add validation of bfb and rshim options
  * Fix the rshim command line for register read/write
- includes changes from 2.3.4:
  * mlx-mkbfb: Improve the performance when extracting a single image
  * Reduce CPU utilization by network optimization
- includes changes from 2.3.2:
  * bfb-install: Support trimmed NIC_FW
  * bfdump support
  * Use BREADCRUMB.BIT32 to indicate NIC mode
  * Added bfb-tool script
- includes changes from 2.3.1:
  * Enhance command line for register read/write
  * Support PCIe device name runtime update
  * bfb-install: Enhancement for runtime upgrade
  * bfb-install: don't exit script when rshim install fails
  * Add fwpkg_unpack tool
  * Added mlx-mkbfb
- build with fuse 3 (boo#1243151)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736000">- update to 2.5.2:
  * No service interrupt for DPU-BMC flow
  * Support Golden Images in PLDM format
  * Deregister driver when not in use
- includes changes from 2.5.1:
  * Fix rshim drop mode driver binding
- includes changes from 2.4.4:
  * Fix bfdump doesn't return error code in case of success
- includes changes from 2.4.3:
  * Fix bfdump doesn't return error code
- includes changes from 2.4.2:
  * Reduce CPU usage by polling optimization
- includes changes from 2.4.1:
  * bfb-install: BFB format conversion for runtime upgrade</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736001">- restructure files in spec file
- update to 2.7.1 (jsc#PED-15326)
  * Some robust fixes for USB
- includes changes from 2.6.4:
  * Fix bfb-install exit incorrectly on BlueField-2
- includes changes from 2.6.3:
  * Add 10-tmfifo.link to disable udev assigning MAC to tmfifo_netN
- includes changes from 2.6.2:
  * Fix commit f41306d ("Provide local struct termio for console ioctl")
- includes changes from 2.6.1:
  * Provide local struct termio for console ioctl
- includes changes from 2.5.8:
  * bfb-tool capsule flow replace and bf.cfg extract flows
  * bfb-install: Fix no proper output for missing rshim device
  * bfb-tool: Redirect output to standard output
- includes changes from 2.5.7:
  * bfb-install deferred issue and BMC credential issue
- includes changes from 2.5.6, 2.5.5 and 2.5.4:
  * Some enhancement for the command mode
- includes changes from 2.5.3:
  * Fix SIGTERM segfault when rshim exits</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1778846400">- add systemdutildir configuration variable, to be able to set the
  correct config file path for systemd</changelog>
</package>
<package pkgid="80aa9b7f55535388ea62d33a08c46ce125d5e531cf83b6925d08914b4005bb666723180ef40c297fda277479bb3fc9b1cb333e4fc1162afd40f4c6ad94f63d53" name="rshim" arch="src">
  <version epoch="0" ver="2.7.1" rel="bp161.10.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1605787200">- update to 2.0.55.1
  * add bfb-install script
- fix version number naming
- add versioning to _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611576000">- fix _service file
- update to 2.0.5.8.3
  * fix various issues
  * add workaround for Bluefield-2 REV-0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1615464000">- update to 2.0.5.10
  * fix possible tmfifo data loss in PCIe interface
  * fix USB deadlock
  * reduce CPU load when no rshim device present
  * add PCIe hotplug support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1632916800">- update to 2.0.6.1.5
  * Disable the background timer if no rshim devices
  * Setting default path for rshim config file
  * Refine when some workarounds should be applied
  * Fix hypervisor crash when several cards boot or push streams
  * Set MTU to standard max size</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1637323200">- update to 2.0.6.2.2
  * bfb-install: Handle new indications for installation completion
  * Make USB reset configurable and set to 3 seconds
  * Move USB reset to USB up event</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- update to 2.0.6.11.5
  * Fix a possible crash on PCIe for BF1/2
  * Fix possible race condition when several rshim devices are present
  * Fix a kernel crash when undbinding from uio
  * Detect new USB/rshim hot plug</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 2.0.6.13.7
  * make use of rshim with several devices more efficient
  * support 32 bit CR space possible on BF3 USB access
  * support more transfer sizes
  * add new device ID for BF3
  * allow to en/disable VFIO/UIO support via rshim.conf
  * make restart of rshim process more robust fixing potential race
  * set default boot timeout to 150 seconds</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1678968000">- update to 2.0.6.19.2
  * fix potential NULL pointer access during USB disconnection
  * fix vfio and direct mapping mode with several devices
  * avoid use of stale cached pci_dev pointer after device reset
  * adjust reset delay
  * update to dual-licensese GPL-2.0/BSD-3-Clause</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1682078400">- Update service to new tag format
- update to 2.0.7
  * adjust reset delay
  * avoid leak the file descriptor for /dev/uio</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1693396800">- Update to 2.0.9
  * Fix fallback logic of direct mapping
  * Make timeout configurable through /dev/rshimX/misc</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1698926400">- Update to 2.0.12.1
  * Display uptime in seconds for BF3
  * Add fuse3 support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1709812800">- Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
  * Adjust delay time for nic_fw reset
  * Add BFB completion condition for enhanced NIC mode
  * Fixes for potential high CPU utilization</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1715342400">- Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
  * Output SECURE_NIC_MODE in /dev/rshim&lt;N&gt;/misc
  * Allow remote installation via bfb-install
  * Make DROP_MODE more robust
  * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
  * Fix handshake between NIC F and rshim over PCIe</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 2.1.5.0
  * Avoid polling blocked status during reset
  * Adjust default reset delay to 3 seconds on PCIe
  * Remove workaround support for BF2 A0 chip
  * Only poll/check locked mode for PCIe backend
  * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
  * add 'CLEAR_ON_READ' command to delete rshim log after read
  * Add ownership transfer feature
  * Allow /dev/rshim&lt;N&gt; devfs creation only with --force option enabled
  * Make sending the initial force command a one-time event
  * Add VFIO support for Bluefield-3 on PCIe
  * Add support for command mode
  * Adjust default boot timeout to 300s
  * Make rshim run in single instance</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1731499200">- Update to 2.1.6.0
  * Add USB_TIMEOUT to rshim misc and conf settings
  * Use BOOT_RESET_SKIP command to simulate eMMC boot</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1738843200">- Update to 2.2.4.0
  * Update default USB timeout
  * Add BF_MODE misc output to show DPU or NIC mode (BF3 only)
  * Allow 0 to restrore USB_TIMEOUT default value
  * Allow multi rshim processes for dev attchment
  * Force stop if stuck during systemd service stop
  * removes unnecesary POLLOUT polling in USB</changelog>
  <changelog author="Andreas Stieger &lt;andreas.stieger@gmx.de&gt;" date="1747224000">- update to 2.3.8:
  * Fix a potentially unintialized variable
- includes changes from 2.3.7:
  * bfb-install: Reactivate NIC_FW for runtime upgrade
- includes changes from 2.3.6:
  * bfb-install: cleanup the TMP_DIR
- includes changes from 2.3.5:
  * bfb-install: add validation of bfb and rshim options
  * Fix the rshim command line for register read/write
- includes changes from 2.3.4:
  * mlx-mkbfb: Improve the performance when extracting a single image
  * Reduce CPU utilization by network optimization
- includes changes from 2.3.2:
  * bfb-install: Support trimmed NIC_FW
  * bfdump support
  * Use BREADCRUMB.BIT32 to indicate NIC mode
  * Added bfb-tool script
- includes changes from 2.3.1:
  * Enhance command line for register read/write
  * Support PCIe device name runtime update
  * bfb-install: Enhancement for runtime upgrade
  * bfb-install: don't exit script when rshim install fails
  * Add fwpkg_unpack tool
  * Added mlx-mkbfb
- build with fuse 3 (boo#1243151)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736000">- update to 2.5.2:
  * No service interrupt for DPU-BMC flow
  * Support Golden Images in PLDM format
  * Deregister driver when not in use
- includes changes from 2.5.1:
  * Fix rshim drop mode driver binding
- includes changes from 2.4.4:
  * Fix bfdump doesn't return error code in case of success
- includes changes from 2.4.3:
  * Fix bfdump doesn't return error code
- includes changes from 2.4.2:
  * Reduce CPU usage by polling optimization
- includes changes from 2.4.1:
  * bfb-install: BFB format conversion for runtime upgrade</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736001">- restructure files in spec file
- update to 2.7.1 (jsc#PED-15326)
  * Some robust fixes for USB
- includes changes from 2.6.4:
  * Fix bfb-install exit incorrectly on BlueField-2
- includes changes from 2.6.3:
  * Add 10-tmfifo.link to disable udev assigning MAC to tmfifo_netN
- includes changes from 2.6.2:
  * Fix commit f41306d ("Provide local struct termio for console ioctl")
- includes changes from 2.6.1:
  * Provide local struct termio for console ioctl
- includes changes from 2.5.8:
  * bfb-tool capsule flow replace and bf.cfg extract flows
  * bfb-install: Fix no proper output for missing rshim device
  * bfb-tool: Redirect output to standard output
- includes changes from 2.5.7:
  * bfb-install deferred issue and BMC credential issue
- includes changes from 2.5.6, 2.5.5 and 2.5.4:
  * Some enhancement for the command mode
- includes changes from 2.5.3:
  * Fix SIGTERM segfault when rshim exits</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1778846400">- add systemdutildir configuration variable, to be able to set the
  correct config file path for systemd</changelog>
</package>
<package pkgid="960ee2444d80350af22e1e0a75585a9fa87ae7cbf52f02a7420cf38d47aa2f01c2053e4852b65b5931e48bd45485a5bb33a672ae57d522ab0a28f8986eb96dbc" name="rshim" arch="x86_64">
  <version epoch="0" ver="2.7.1" rel="bp161.10.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1605787200">- update to 2.0.55.1
  * add bfb-install script
- fix version number naming
- add versioning to _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611576000">- fix _service file
- update to 2.0.5.8.3
  * fix various issues
  * add workaround for Bluefield-2 REV-0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1615464000">- update to 2.0.5.10
  * fix possible tmfifo data loss in PCIe interface
  * fix USB deadlock
  * reduce CPU load when no rshim device present
  * add PCIe hotplug support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1632916800">- update to 2.0.6.1.5
  * Disable the background timer if no rshim devices
  * Setting default path for rshim config file
  * Refine when some workarounds should be applied
  * Fix hypervisor crash when several cards boot or push streams
  * Set MTU to standard max size</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1637323200">- update to 2.0.6.2.2
  * bfb-install: Handle new indications for installation completion
  * Make USB reset configurable and set to 3 seconds
  * Move USB reset to USB up event</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- update to 2.0.6.11.5
  * Fix a possible crash on PCIe for BF1/2
  * Fix possible race condition when several rshim devices are present
  * Fix a kernel crash when undbinding from uio
  * Detect new USB/rshim hot plug</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 2.0.6.13.7
  * make use of rshim with several devices more efficient
  * support 32 bit CR space possible on BF3 USB access
  * support more transfer sizes
  * add new device ID for BF3
  * allow to en/disable VFIO/UIO support via rshim.conf
  * make restart of rshim process more robust fixing potential race
  * set default boot timeout to 150 seconds</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1678968000">- update to 2.0.6.19.2
  * fix potential NULL pointer access during USB disconnection
  * fix vfio and direct mapping mode with several devices
  * avoid use of stale cached pci_dev pointer after device reset
  * adjust reset delay
  * update to dual-licensese GPL-2.0/BSD-3-Clause</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1682078400">- Update service to new tag format
- update to 2.0.7
  * adjust reset delay
  * avoid leak the file descriptor for /dev/uio</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1693396800">- Update to 2.0.9
  * Fix fallback logic of direct mapping
  * Make timeout configurable through /dev/rshimX/misc</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1698926400">- Update to 2.0.12.1
  * Display uptime in seconds for BF3
  * Add fuse3 support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1709812800">- Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
  * Adjust delay time for nic_fw reset
  * Add BFB completion condition for enhanced NIC mode
  * Fixes for potential high CPU utilization</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1715342400">- Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
  * Output SECURE_NIC_MODE in /dev/rshim&lt;N&gt;/misc
  * Allow remote installation via bfb-install
  * Make DROP_MODE more robust
  * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
  * Fix handshake between NIC F and rshim over PCIe</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 2.1.5.0
  * Avoid polling blocked status during reset
  * Adjust default reset delay to 3 seconds on PCIe
  * Remove workaround support for BF2 A0 chip
  * Only poll/check locked mode for PCIe backend
  * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
  * add 'CLEAR_ON_READ' command to delete rshim log after read
  * Add ownership transfer feature
  * Allow /dev/rshim&lt;N&gt; devfs creation only with --force option enabled
  * Make sending the initial force command a one-time event
  * Add VFIO support for Bluefield-3 on PCIe
  * Add support for command mode
  * Adjust default boot timeout to 300s
  * Make rshim run in single instance</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1731499200">- Update to 2.1.6.0
  * Add USB_TIMEOUT to rshim misc and conf settings
  * Use BOOT_RESET_SKIP command to simulate eMMC boot</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1738843200">- Update to 2.2.4.0
  * Update default USB timeout
  * Add BF_MODE misc output to show DPU or NIC mode (BF3 only)
  * Allow 0 to restrore USB_TIMEOUT default value
  * Allow multi rshim processes for dev attchment
  * Force stop if stuck during systemd service stop
  * removes unnecesary POLLOUT polling in USB</changelog>
  <changelog author="Andreas Stieger &lt;andreas.stieger@gmx.de&gt;" date="1747224000">- update to 2.3.8:
  * Fix a potentially unintialized variable
- includes changes from 2.3.7:
  * bfb-install: Reactivate NIC_FW for runtime upgrade
- includes changes from 2.3.6:
  * bfb-install: cleanup the TMP_DIR
- includes changes from 2.3.5:
  * bfb-install: add validation of bfb and rshim options
  * Fix the rshim command line for register read/write
- includes changes from 2.3.4:
  * mlx-mkbfb: Improve the performance when extracting a single image
  * Reduce CPU utilization by network optimization
- includes changes from 2.3.2:
  * bfb-install: Support trimmed NIC_FW
  * bfdump support
  * Use BREADCRUMB.BIT32 to indicate NIC mode
  * Added bfb-tool script
- includes changes from 2.3.1:
  * Enhance command line for register read/write
  * Support PCIe device name runtime update
  * bfb-install: Enhancement for runtime upgrade
  * bfb-install: don't exit script when rshim install fails
  * Add fwpkg_unpack tool
  * Added mlx-mkbfb
- build with fuse 3 (boo#1243151)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736000">- update to 2.5.2:
  * No service interrupt for DPU-BMC flow
  * Support Golden Images in PLDM format
  * Deregister driver when not in use
- includes changes from 2.5.1:
  * Fix rshim drop mode driver binding
- includes changes from 2.4.4:
  * Fix bfdump doesn't return error code in case of success
- includes changes from 2.4.3:
  * Fix bfdump doesn't return error code
- includes changes from 2.4.2:
  * Reduce CPU usage by polling optimization
- includes changes from 2.4.1:
  * bfb-install: BFB format conversion for runtime upgrade</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736001">- restructure files in spec file
- update to 2.7.1 (jsc#PED-15326)
  * Some robust fixes for USB
- includes changes from 2.6.4:
  * Fix bfb-install exit incorrectly on BlueField-2
- includes changes from 2.6.3:
  * Add 10-tmfifo.link to disable udev assigning MAC to tmfifo_netN
- includes changes from 2.6.2:
  * Fix commit f41306d ("Provide local struct termio for console ioctl")
- includes changes from 2.6.1:
  * Provide local struct termio for console ioctl
- includes changes from 2.5.8:
  * bfb-tool capsule flow replace and bf.cfg extract flows
  * bfb-install: Fix no proper output for missing rshim device
  * bfb-tool: Redirect output to standard output
- includes changes from 2.5.7:
  * bfb-install deferred issue and BMC credential issue
- includes changes from 2.5.6, 2.5.5 and 2.5.4:
  * Some enhancement for the command mode
- includes changes from 2.5.3:
  * Fix SIGTERM segfault when rshim exits</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1778846400">- add systemdutildir configuration variable, to be able to set the
  correct config file path for systemd</changelog>
</package>
<package pkgid="3400ae7a0656d746933e6ded4e8c49a859be081a6c550573692c57da6136b67561209e4d317b27ae59a1229c029daf71f7d41c9e743a40d61ba38248208a2d83" name="rshim-debuginfo" arch="aarch64">
  <version epoch="0" ver="2.7.1" rel="bp161.10.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1605787200">- update to 2.0.55.1
  * add bfb-install script
- fix version number naming
- add versioning to _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611576000">- fix _service file
- update to 2.0.5.8.3
  * fix various issues
  * add workaround for Bluefield-2 REV-0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1615464000">- update to 2.0.5.10
  * fix possible tmfifo data loss in PCIe interface
  * fix USB deadlock
  * reduce CPU load when no rshim device present
  * add PCIe hotplug support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1632916800">- update to 2.0.6.1.5
  * Disable the background timer if no rshim devices
  * Setting default path for rshim config file
  * Refine when some workarounds should be applied
  * Fix hypervisor crash when several cards boot or push streams
  * Set MTU to standard max size</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1637323200">- update to 2.0.6.2.2
  * bfb-install: Handle new indications for installation completion
  * Make USB reset configurable and set to 3 seconds
  * Move USB reset to USB up event</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- update to 2.0.6.11.5
  * Fix a possible crash on PCIe for BF1/2
  * Fix possible race condition when several rshim devices are present
  * Fix a kernel crash when undbinding from uio
  * Detect new USB/rshim hot plug</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 2.0.6.13.7
  * make use of rshim with several devices more efficient
  * support 32 bit CR space possible on BF3 USB access
  * support more transfer sizes
  * add new device ID for BF3
  * allow to en/disable VFIO/UIO support via rshim.conf
  * make restart of rshim process more robust fixing potential race
  * set default boot timeout to 150 seconds</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1678968000">- update to 2.0.6.19.2
  * fix potential NULL pointer access during USB disconnection
  * fix vfio and direct mapping mode with several devices
  * avoid use of stale cached pci_dev pointer after device reset
  * adjust reset delay
  * update to dual-licensese GPL-2.0/BSD-3-Clause</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1682078400">- Update service to new tag format
- update to 2.0.7
  * adjust reset delay
  * avoid leak the file descriptor for /dev/uio</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1693396800">- Update to 2.0.9
  * Fix fallback logic of direct mapping
  * Make timeout configurable through /dev/rshimX/misc</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1698926400">- Update to 2.0.12.1
  * Display uptime in seconds for BF3
  * Add fuse3 support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1709812800">- Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
  * Adjust delay time for nic_fw reset
  * Add BFB completion condition for enhanced NIC mode
  * Fixes for potential high CPU utilization</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1715342400">- Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
  * Output SECURE_NIC_MODE in /dev/rshim&lt;N&gt;/misc
  * Allow remote installation via bfb-install
  * Make DROP_MODE more robust
  * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
  * Fix handshake between NIC F and rshim over PCIe</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 2.1.5.0
  * Avoid polling blocked status during reset
  * Adjust default reset delay to 3 seconds on PCIe
  * Remove workaround support for BF2 A0 chip
  * Only poll/check locked mode for PCIe backend
  * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
  * add 'CLEAR_ON_READ' command to delete rshim log after read
  * Add ownership transfer feature
  * Allow /dev/rshim&lt;N&gt; devfs creation only with --force option enabled
  * Make sending the initial force command a one-time event
  * Add VFIO support for Bluefield-3 on PCIe
  * Add support for command mode
  * Adjust default boot timeout to 300s
  * Make rshim run in single instance</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1731499200">- Update to 2.1.6.0
  * Add USB_TIMEOUT to rshim misc and conf settings
  * Use BOOT_RESET_SKIP command to simulate eMMC boot</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1738843200">- Update to 2.2.4.0
  * Update default USB timeout
  * Add BF_MODE misc output to show DPU or NIC mode (BF3 only)
  * Allow 0 to restrore USB_TIMEOUT default value
  * Allow multi rshim processes for dev attchment
  * Force stop if stuck during systemd service stop
  * removes unnecesary POLLOUT polling in USB</changelog>
  <changelog author="Andreas Stieger &lt;andreas.stieger@gmx.de&gt;" date="1747224000">- update to 2.3.8:
  * Fix a potentially unintialized variable
- includes changes from 2.3.7:
  * bfb-install: Reactivate NIC_FW for runtime upgrade
- includes changes from 2.3.6:
  * bfb-install: cleanup the TMP_DIR
- includes changes from 2.3.5:
  * bfb-install: add validation of bfb and rshim options
  * Fix the rshim command line for register read/write
- includes changes from 2.3.4:
  * mlx-mkbfb: Improve the performance when extracting a single image
  * Reduce CPU utilization by network optimization
- includes changes from 2.3.2:
  * bfb-install: Support trimmed NIC_FW
  * bfdump support
  * Use BREADCRUMB.BIT32 to indicate NIC mode
  * Added bfb-tool script
- includes changes from 2.3.1:
  * Enhance command line for register read/write
  * Support PCIe device name runtime update
  * bfb-install: Enhancement for runtime upgrade
  * bfb-install: don't exit script when rshim install fails
  * Add fwpkg_unpack tool
  * Added mlx-mkbfb
- build with fuse 3 (boo#1243151)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736000">- update to 2.5.2:
  * No service interrupt for DPU-BMC flow
  * Support Golden Images in PLDM format
  * Deregister driver when not in use
- includes changes from 2.5.1:
  * Fix rshim drop mode driver binding
- includes changes from 2.4.4:
  * Fix bfdump doesn't return error code in case of success
- includes changes from 2.4.3:
  * Fix bfdump doesn't return error code
- includes changes from 2.4.2:
  * Reduce CPU usage by polling optimization
- includes changes from 2.4.1:
  * bfb-install: BFB format conversion for runtime upgrade</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736001">- restructure files in spec file
- update to 2.7.1 (jsc#PED-15326)
  * Some robust fixes for USB
- includes changes from 2.6.4:
  * Fix bfb-install exit incorrectly on BlueField-2
- includes changes from 2.6.3:
  * Add 10-tmfifo.link to disable udev assigning MAC to tmfifo_netN
- includes changes from 2.6.2:
  * Fix commit f41306d ("Provide local struct termio for console ioctl")
- includes changes from 2.6.1:
  * Provide local struct termio for console ioctl
- includes changes from 2.5.8:
  * bfb-tool capsule flow replace and bf.cfg extract flows
  * bfb-install: Fix no proper output for missing rshim device
  * bfb-tool: Redirect output to standard output
- includes changes from 2.5.7:
  * bfb-install deferred issue and BMC credential issue
- includes changes from 2.5.6, 2.5.5 and 2.5.4:
  * Some enhancement for the command mode
- includes changes from 2.5.3:
  * Fix SIGTERM segfault when rshim exits</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1778846400">- add systemdutildir configuration variable, to be able to set the
  correct config file path for systemd</changelog>
</package>
<package pkgid="d78f142b17d88b157de19a30fc2cbe58cf9943a607fc60e7fdd68845140f331df8839d1e7637cb0103a2685aaecc70099ff9e8064db73b4e5cdd751cf0b5cb6e" name="rshim-debuginfo" arch="x86_64">
  <version epoch="0" ver="2.7.1" rel="bp161.10.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1605787200">- update to 2.0.55.1
  * add bfb-install script
- fix version number naming
- add versioning to _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611576000">- fix _service file
- update to 2.0.5.8.3
  * fix various issues
  * add workaround for Bluefield-2 REV-0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1615464000">- update to 2.0.5.10
  * fix possible tmfifo data loss in PCIe interface
  * fix USB deadlock
  * reduce CPU load when no rshim device present
  * add PCIe hotplug support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1632916800">- update to 2.0.6.1.5
  * Disable the background timer if no rshim devices
  * Setting default path for rshim config file
  * Refine when some workarounds should be applied
  * Fix hypervisor crash when several cards boot or push streams
  * Set MTU to standard max size</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1637323200">- update to 2.0.6.2.2
  * bfb-install: Handle new indications for installation completion
  * Make USB reset configurable and set to 3 seconds
  * Move USB reset to USB up event</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- update to 2.0.6.11.5
  * Fix a possible crash on PCIe for BF1/2
  * Fix possible race condition when several rshim devices are present
  * Fix a kernel crash when undbinding from uio
  * Detect new USB/rshim hot plug</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 2.0.6.13.7
  * make use of rshim with several devices more efficient
  * support 32 bit CR space possible on BF3 USB access
  * support more transfer sizes
  * add new device ID for BF3
  * allow to en/disable VFIO/UIO support via rshim.conf
  * make restart of rshim process more robust fixing potential race
  * set default boot timeout to 150 seconds</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1678968000">- update to 2.0.6.19.2
  * fix potential NULL pointer access during USB disconnection
  * fix vfio and direct mapping mode with several devices
  * avoid use of stale cached pci_dev pointer after device reset
  * adjust reset delay
  * update to dual-licensese GPL-2.0/BSD-3-Clause</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1682078400">- Update service to new tag format
- update to 2.0.7
  * adjust reset delay
  * avoid leak the file descriptor for /dev/uio</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1693396800">- Update to 2.0.9
  * Fix fallback logic of direct mapping
  * Make timeout configurable through /dev/rshimX/misc</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1698926400">- Update to 2.0.12.1
  * Display uptime in seconds for BF3
  * Add fuse3 support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1709812800">- Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
  * Adjust delay time for nic_fw reset
  * Add BFB completion condition for enhanced NIC mode
  * Fixes for potential high CPU utilization</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1715342400">- Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
  * Output SECURE_NIC_MODE in /dev/rshim&lt;N&gt;/misc
  * Allow remote installation via bfb-install
  * Make DROP_MODE more robust
  * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
  * Fix handshake between NIC F and rshim over PCIe</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 2.1.5.0
  * Avoid polling blocked status during reset
  * Adjust default reset delay to 3 seconds on PCIe
  * Remove workaround support for BF2 A0 chip
  * Only poll/check locked mode for PCIe backend
  * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
  * add 'CLEAR_ON_READ' command to delete rshim log after read
  * Add ownership transfer feature
  * Allow /dev/rshim&lt;N&gt; devfs creation only with --force option enabled
  * Make sending the initial force command a one-time event
  * Add VFIO support for Bluefield-3 on PCIe
  * Add support for command mode
  * Adjust default boot timeout to 300s
  * Make rshim run in single instance</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1731499200">- Update to 2.1.6.0
  * Add USB_TIMEOUT to rshim misc and conf settings
  * Use BOOT_RESET_SKIP command to simulate eMMC boot</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1738843200">- Update to 2.2.4.0
  * Update default USB timeout
  * Add BF_MODE misc output to show DPU or NIC mode (BF3 only)
  * Allow 0 to restrore USB_TIMEOUT default value
  * Allow multi rshim processes for dev attchment
  * Force stop if stuck during systemd service stop
  * removes unnecesary POLLOUT polling in USB</changelog>
  <changelog author="Andreas Stieger &lt;andreas.stieger@gmx.de&gt;" date="1747224000">- update to 2.3.8:
  * Fix a potentially unintialized variable
- includes changes from 2.3.7:
  * bfb-install: Reactivate NIC_FW for runtime upgrade
- includes changes from 2.3.6:
  * bfb-install: cleanup the TMP_DIR
- includes changes from 2.3.5:
  * bfb-install: add validation of bfb and rshim options
  * Fix the rshim command line for register read/write
- includes changes from 2.3.4:
  * mlx-mkbfb: Improve the performance when extracting a single image
  * Reduce CPU utilization by network optimization
- includes changes from 2.3.2:
  * bfb-install: Support trimmed NIC_FW
  * bfdump support
  * Use BREADCRUMB.BIT32 to indicate NIC mode
  * Added bfb-tool script
- includes changes from 2.3.1:
  * Enhance command line for register read/write
  * Support PCIe device name runtime update
  * bfb-install: Enhancement for runtime upgrade
  * bfb-install: don't exit script when rshim install fails
  * Add fwpkg_unpack tool
  * Added mlx-mkbfb
- build with fuse 3 (boo#1243151)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736000">- update to 2.5.2:
  * No service interrupt for DPU-BMC flow
  * Support Golden Images in PLDM format
  * Deregister driver when not in use
- includes changes from 2.5.1:
  * Fix rshim drop mode driver binding
- includes changes from 2.4.4:
  * Fix bfdump doesn't return error code in case of success
- includes changes from 2.4.3:
  * Fix bfdump doesn't return error code
- includes changes from 2.4.2:
  * Reduce CPU usage by polling optimization
- includes changes from 2.4.1:
  * bfb-install: BFB format conversion for runtime upgrade</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736001">- restructure files in spec file
- update to 2.7.1 (jsc#PED-15326)
  * Some robust fixes for USB
- includes changes from 2.6.4:
  * Fix bfb-install exit incorrectly on BlueField-2
- includes changes from 2.6.3:
  * Add 10-tmfifo.link to disable udev assigning MAC to tmfifo_netN
- includes changes from 2.6.2:
  * Fix commit f41306d ("Provide local struct termio for console ioctl")
- includes changes from 2.6.1:
  * Provide local struct termio for console ioctl
- includes changes from 2.5.8:
  * bfb-tool capsule flow replace and bf.cfg extract flows
  * bfb-install: Fix no proper output for missing rshim device
  * bfb-tool: Redirect output to standard output
- includes changes from 2.5.7:
  * bfb-install deferred issue and BMC credential issue
- includes changes from 2.5.6, 2.5.5 and 2.5.4:
  * Some enhancement for the command mode
- includes changes from 2.5.3:
  * Fix SIGTERM segfault when rshim exits</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1778846400">- add systemdutildir configuration variable, to be able to set the
  correct config file path for systemd</changelog>
</package>
<package pkgid="7b5e3b42821724735483faa89d90d4299d21e260a52169b4b8c6b5f9665d452b00a07f9a4f0f46224b050842548490fe807fafa55bd4ddcb117d85f5ce460a31" name="rshim-debugsource" arch="aarch64">
  <version epoch="0" ver="2.7.1" rel="bp161.10.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1605787200">- update to 2.0.55.1
  * add bfb-install script
- fix version number naming
- add versioning to _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611576000">- fix _service file
- update to 2.0.5.8.3
  * fix various issues
  * add workaround for Bluefield-2 REV-0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1615464000">- update to 2.0.5.10
  * fix possible tmfifo data loss in PCIe interface
  * fix USB deadlock
  * reduce CPU load when no rshim device present
  * add PCIe hotplug support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1632916800">- update to 2.0.6.1.5
  * Disable the background timer if no rshim devices
  * Setting default path for rshim config file
  * Refine when some workarounds should be applied
  * Fix hypervisor crash when several cards boot or push streams
  * Set MTU to standard max size</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1637323200">- update to 2.0.6.2.2
  * bfb-install: Handle new indications for installation completion
  * Make USB reset configurable and set to 3 seconds
  * Move USB reset to USB up event</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- update to 2.0.6.11.5
  * Fix a possible crash on PCIe for BF1/2
  * Fix possible race condition when several rshim devices are present
  * Fix a kernel crash when undbinding from uio
  * Detect new USB/rshim hot plug</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 2.0.6.13.7
  * make use of rshim with several devices more efficient
  * support 32 bit CR space possible on BF3 USB access
  * support more transfer sizes
  * add new device ID for BF3
  * allow to en/disable VFIO/UIO support via rshim.conf
  * make restart of rshim process more robust fixing potential race
  * set default boot timeout to 150 seconds</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1678968000">- update to 2.0.6.19.2
  * fix potential NULL pointer access during USB disconnection
  * fix vfio and direct mapping mode with several devices
  * avoid use of stale cached pci_dev pointer after device reset
  * adjust reset delay
  * update to dual-licensese GPL-2.0/BSD-3-Clause</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1682078400">- Update service to new tag format
- update to 2.0.7
  * adjust reset delay
  * avoid leak the file descriptor for /dev/uio</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1693396800">- Update to 2.0.9
  * Fix fallback logic of direct mapping
  * Make timeout configurable through /dev/rshimX/misc</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1698926400">- Update to 2.0.12.1
  * Display uptime in seconds for BF3
  * Add fuse3 support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1709812800">- Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
  * Adjust delay time for nic_fw reset
  * Add BFB completion condition for enhanced NIC mode
  * Fixes for potential high CPU utilization</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1715342400">- Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
  * Output SECURE_NIC_MODE in /dev/rshim&lt;N&gt;/misc
  * Allow remote installation via bfb-install
  * Make DROP_MODE more robust
  * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
  * Fix handshake between NIC F and rshim over PCIe</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 2.1.5.0
  * Avoid polling blocked status during reset
  * Adjust default reset delay to 3 seconds on PCIe
  * Remove workaround support for BF2 A0 chip
  * Only poll/check locked mode for PCIe backend
  * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
  * add 'CLEAR_ON_READ' command to delete rshim log after read
  * Add ownership transfer feature
  * Allow /dev/rshim&lt;N&gt; devfs creation only with --force option enabled
  * Make sending the initial force command a one-time event
  * Add VFIO support for Bluefield-3 on PCIe
  * Add support for command mode
  * Adjust default boot timeout to 300s
  * Make rshim run in single instance</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1731499200">- Update to 2.1.6.0
  * Add USB_TIMEOUT to rshim misc and conf settings
  * Use BOOT_RESET_SKIP command to simulate eMMC boot</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1738843200">- Update to 2.2.4.0
  * Update default USB timeout
  * Add BF_MODE misc output to show DPU or NIC mode (BF3 only)
  * Allow 0 to restrore USB_TIMEOUT default value
  * Allow multi rshim processes for dev attchment
  * Force stop if stuck during systemd service stop
  * removes unnecesary POLLOUT polling in USB</changelog>
  <changelog author="Andreas Stieger &lt;andreas.stieger@gmx.de&gt;" date="1747224000">- update to 2.3.8:
  * Fix a potentially unintialized variable
- includes changes from 2.3.7:
  * bfb-install: Reactivate NIC_FW for runtime upgrade
- includes changes from 2.3.6:
  * bfb-install: cleanup the TMP_DIR
- includes changes from 2.3.5:
  * bfb-install: add validation of bfb and rshim options
  * Fix the rshim command line for register read/write
- includes changes from 2.3.4:
  * mlx-mkbfb: Improve the performance when extracting a single image
  * Reduce CPU utilization by network optimization
- includes changes from 2.3.2:
  * bfb-install: Support trimmed NIC_FW
  * bfdump support
  * Use BREADCRUMB.BIT32 to indicate NIC mode
  * Added bfb-tool script
- includes changes from 2.3.1:
  * Enhance command line for register read/write
  * Support PCIe device name runtime update
  * bfb-install: Enhancement for runtime upgrade
  * bfb-install: don't exit script when rshim install fails
  * Add fwpkg_unpack tool
  * Added mlx-mkbfb
- build with fuse 3 (boo#1243151)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736000">- update to 2.5.2:
  * No service interrupt for DPU-BMC flow
  * Support Golden Images in PLDM format
  * Deregister driver when not in use
- includes changes from 2.5.1:
  * Fix rshim drop mode driver binding
- includes changes from 2.4.4:
  * Fix bfdump doesn't return error code in case of success
- includes changes from 2.4.3:
  * Fix bfdump doesn't return error code
- includes changes from 2.4.2:
  * Reduce CPU usage by polling optimization
- includes changes from 2.4.1:
  * bfb-install: BFB format conversion for runtime upgrade</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736001">- restructure files in spec file
- update to 2.7.1 (jsc#PED-15326)
  * Some robust fixes for USB
- includes changes from 2.6.4:
  * Fix bfb-install exit incorrectly on BlueField-2
- includes changes from 2.6.3:
  * Add 10-tmfifo.link to disable udev assigning MAC to tmfifo_netN
- includes changes from 2.6.2:
  * Fix commit f41306d ("Provide local struct termio for console ioctl")
- includes changes from 2.6.1:
  * Provide local struct termio for console ioctl
- includes changes from 2.5.8:
  * bfb-tool capsule flow replace and bf.cfg extract flows
  * bfb-install: Fix no proper output for missing rshim device
  * bfb-tool: Redirect output to standard output
- includes changes from 2.5.7:
  * bfb-install deferred issue and BMC credential issue
- includes changes from 2.5.6, 2.5.5 and 2.5.4:
  * Some enhancement for the command mode
- includes changes from 2.5.3:
  * Fix SIGTERM segfault when rshim exits</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1778846400">- add systemdutildir configuration variable, to be able to set the
  correct config file path for systemd</changelog>
</package>
<package pkgid="31fec15a1315210d9368df868c9a821e47d357810eb2bda47722850ca64d95ae9fa4d187f63056b43664fb298da83343e668316d1c205a907ad4b0dd3a528221" name="rshim-debugsource" arch="x86_64">
  <version epoch="0" ver="2.7.1" rel="bp161.10.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1605787200">- update to 2.0.55.1
  * add bfb-install script
- fix version number naming
- add versioning to _service file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1611576000">- fix _service file
- update to 2.0.5.8.3
  * fix various issues
  * add workaround for Bluefield-2 REV-0</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1615464000">- update to 2.0.5.10
  * fix possible tmfifo data loss in PCIe interface
  * fix USB deadlock
  * reduce CPU load when no rshim device present
  * add PCIe hotplug support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1632916800">- update to 2.0.6.1.5
  * Disable the background timer if no rshim devices
  * Setting default path for rshim config file
  * Refine when some workarounds should be applied
  * Fix hypervisor crash when several cards boot or push streams
  * Set MTU to standard max size</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1637323200">- update to 2.0.6.2.2
  * bfb-install: Handle new indications for installation completion
  * Make USB reset configurable and set to 3 seconds
  * Move USB reset to USB up event</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1657800000">- update to 2.0.6.11.5
  * Fix a possible crash on PCIe for BF1/2
  * Fix possible race condition when several rshim devices are present
  * Fix a kernel crash when undbinding from uio
  * Detect new USB/rshim hot plug</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1663243200">- update to 2.0.6.13.7
  * make use of rshim with several devices more efficient
  * support 32 bit CR space possible on BF3 USB access
  * support more transfer sizes
  * add new device ID for BF3
  * allow to en/disable VFIO/UIO support via rshim.conf
  * make restart of rshim process more robust fixing potential race
  * set default boot timeout to 150 seconds</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1678968000">- update to 2.0.6.19.2
  * fix potential NULL pointer access during USB disconnection
  * fix vfio and direct mapping mode with several devices
  * avoid use of stale cached pci_dev pointer after device reset
  * adjust reset delay
  * update to dual-licensese GPL-2.0/BSD-3-Clause</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1682078400">- Update service to new tag format
- update to 2.0.7
  * adjust reset delay
  * avoid leak the file descriptor for /dev/uio</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1693396800">- Update to 2.0.9
  * Fix fallback logic of direct mapping
  * Make timeout configurable through /dev/rshimX/misc</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1698926400">- Update to 2.0.12.1
  * Display uptime in seconds for BF3
  * Add fuse3 support</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1709812800">- Update to 2.0.20.0 (jsc#PED-6843 jsc#PED-6979)
  * Adjust delay time for nic_fw reset
  * Add BFB completion condition for enhanced NIC mode
  * Fixes for potential high CPU utilization</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1715342400">- Update to 2.0.29.1 (jsc#PED-6843 jsc#PED-6979)
  * Output SECURE_NIC_MODE in /dev/rshim&lt;N&gt;/misc
  * Allow remote installation via bfb-install
  * Make DROP_MODE more robust
  * Avoid race in bfb push when accessing from BMC and rshim tool in parallel
  * Fix handshake between NIC F and rshim over PCIe</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 2.1.5.0
  * Avoid polling blocked status during reset
  * Adjust default reset delay to 3 seconds on PCIe
  * Remove workaround support for BF2 A0 chip
  * Only poll/check locked mode for PCIe backend
  * support register read/write via /dev/rshim0/rshim for pcie_lf on BF3
  * add 'CLEAR_ON_READ' command to delete rshim log after read
  * Add ownership transfer feature
  * Allow /dev/rshim&lt;N&gt; devfs creation only with --force option enabled
  * Make sending the initial force command a one-time event
  * Add VFIO support for Bluefield-3 on PCIe
  * Add support for command mode
  * Adjust default boot timeout to 300s
  * Make rshim run in single instance</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1731499200">- Update to 2.1.6.0
  * Add USB_TIMEOUT to rshim misc and conf settings
  * Use BOOT_RESET_SKIP command to simulate eMMC boot</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1738843200">- Update to 2.2.4.0
  * Update default USB timeout
  * Add BF_MODE misc output to show DPU or NIC mode (BF3 only)
  * Allow 0 to restrore USB_TIMEOUT default value
  * Allow multi rshim processes for dev attchment
  * Force stop if stuck during systemd service stop
  * removes unnecesary POLLOUT polling in USB</changelog>
  <changelog author="Andreas Stieger &lt;andreas.stieger@gmx.de&gt;" date="1747224000">- update to 2.3.8:
  * Fix a potentially unintialized variable
- includes changes from 2.3.7:
  * bfb-install: Reactivate NIC_FW for runtime upgrade
- includes changes from 2.3.6:
  * bfb-install: cleanup the TMP_DIR
- includes changes from 2.3.5:
  * bfb-install: add validation of bfb and rshim options
  * Fix the rshim command line for register read/write
- includes changes from 2.3.4:
  * mlx-mkbfb: Improve the performance when extracting a single image
  * Reduce CPU utilization by network optimization
- includes changes from 2.3.2:
  * bfb-install: Support trimmed NIC_FW
  * bfdump support
  * Use BREADCRUMB.BIT32 to indicate NIC mode
  * Added bfb-tool script
- includes changes from 2.3.1:
  * Enhance command line for register read/write
  * Support PCIe device name runtime update
  * bfb-install: Enhancement for runtime upgrade
  * bfb-install: don't exit script when rshim install fails
  * Add fwpkg_unpack tool
  * Added mlx-mkbfb
- build with fuse 3 (boo#1243151)</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736000">- update to 2.5.2:
  * No service interrupt for DPU-BMC flow
  * Support Golden Images in PLDM format
  * Deregister driver when not in use
- includes changes from 2.5.1:
  * Fix rshim drop mode driver binding
- includes changes from 2.4.4:
  * Fix bfdump doesn't return error code in case of success
- includes changes from 2.4.3:
  * Fix bfdump doesn't return error code
- includes changes from 2.4.2:
  * Reduce CPU usage by polling optimization
- includes changes from 2.4.1:
  * bfb-install: BFB format conversion for runtime upgrade</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1775736001">- restructure files in spec file
- update to 2.7.1 (jsc#PED-15326)
  * Some robust fixes for USB
- includes changes from 2.6.4:
  * Fix bfb-install exit incorrectly on BlueField-2
- includes changes from 2.6.3:
  * Add 10-tmfifo.link to disable udev assigning MAC to tmfifo_netN
- includes changes from 2.6.2:
  * Fix commit f41306d ("Provide local struct termio for console ioctl")
- includes changes from 2.6.1:
  * Provide local struct termio for console ioctl
- includes changes from 2.5.8:
  * bfb-tool capsule flow replace and bf.cfg extract flows
  * bfb-install: Fix no proper output for missing rshim device
  * bfb-tool: Redirect output to standard output
- includes changes from 2.5.7:
  * bfb-install deferred issue and BMC credential issue
- includes changes from 2.5.6, 2.5.5 and 2.5.4:
  * Some enhancement for the command mode
- includes changes from 2.5.3:
  * Fix SIGTERM segfault when rshim exits</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1778846400">- add systemdutildir configuration variable, to be able to set the
  correct config file path for systemd</changelog>
</package>
<package pkgid="cb11abe64dd0ff9fd4b8b188e0ca5aa1a02ce2262d5173a7f6957e5f214418c388719185b1107808488e02db08554e976a5b9c27bb6a6adc82955390e570ea5b" name="sispmctl" arch="aarch64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="d4e3373a5379ebe24b53d7e88f27fc3ff1edb355b839e25246405d6f515cfbc4d101e7c5d4e6c92e19664c201cff6575fe6f1a88d329d28d941d1479a3457fad" name="sispmctl" arch="src">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="24de17157e328c7454dbe1d831cc74b97767bdaaf1277255bb59ef304d18fd1b9493174f296e45e606d68d21ed51ec379c01fb773be46e3a52e8dbc31fa3bd83" name="sispmctl" arch="x86_64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="9ff9e0ef5cb99821dab04d20aa90068116de64a6e792aacc230bda2124362b5d3235f5bc274d4ad5d902f6ac1bbf7588edb2e15a13d355001eddd5e960c38c00" name="sispmctl-debuginfo" arch="aarch64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="839f914d3d1ca70c46eeca12b0bb2d45159ecef8cd246ca0989b8a33525e8188285984cb6502dfdd4b23041c87c67babc1f02442311b9b97faaca90efcad8622" name="sispmctl-debuginfo" arch="x86_64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="27203bb94a433d8e7f213a0eeac9627387a5da27bcdd3adc35d818fa92b517893684fafad05f1bb9f613871fe33657f688fe7ac4a4d678c46f6ea9a4506342d8" name="sispmctl-debugsource" arch="aarch64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="de40226a8e96553f34818d836c29853e6c2b67af4a0a3a3f68836b279a22a5004f7fd0a67575d7d59556d7233ae062f2b65f0f88006474ea7911656a7384f48c" name="sispmctl-debugsource" arch="x86_64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="eb396bc92e031122fd98aaf8a73cf352d3cc5204fa713067b3be071db90ebf372f40d7a6a19ba619fa542a0f5303469bc2d96bc7cc4311bc5cd205ab3b0d4e4a" name="sispmctl-devel" arch="aarch64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
<package pkgid="09ab4ccb881d5421eb11a4e5548a24c24d583aa17b1487b8a26455cfc6007dc18735021137ba1713d46c5522754c022ee211b2a794285378f980fe19e4b81d3b" name="sispmctl-devel" arch="x86_64">
  <version epoch="0" ver="4.12" rel="bp161.29.1"/>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1539086400">- add tool based on
  064850d ("src/sispm_ctl.c: show correct replaced outlet number")</changelog>
  <changelog author="Guillaume GARDET &lt;guillaume.gardet@opensuse.org&gt;" date="1580126400">- Update to 4.2
- Fix spec file</changelog>
  <changelog author="Tom&#xE1;&#x161; Chv&#xE1;tal &lt;tchvatal@suse.com&gt;" date="1580990400">- Split devel files to devel subpkg
- Remove unused source file
- Format with spec-cleaner</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1581681600">- Add patch to change the udev group to dialout
  * add sispmctl-fix-udev-group.patch</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1583755200">- Update to 4.4
  * fix man page by adding missing command line option
  * smaller changes to the integrated web server
  * only start example systemd web server service after udev rules are assigned</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1584360000">- Update to 4.5
  * add basic authentication for the webserver
  * add bright skin for the webserver</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1585742400">- Update to 4.6
  * Add option to specify powerstrip by USB Bus:Device
  * Improve stability of webserver</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1598702400">- Update to 4.7
  * Support scheduling on EG-PMS2
  * Step up security in systemd service definition
- Use sf.net source URL
- Package README.md</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1599912000">- Update to 4.8
  * Sleep two seconds upon wrong webserver password.
  * Improve parameter checks.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1618056000">- Update to 4.9
  * Correct display of serial number.
  * Fix build error with GCC 4.8.</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1671710400">- Update to 4.10
  * Provide script to create password file
  * Disable ProtectClock in sispmctl.service
  * Minor fixes</changelog>
  <changelog author="Martin Hauke &lt;mardnh@gmx.de&gt;" date="1688904000">- Update to 4.11
  * Create /etc/sispmctl/ in passwordsetup.sh
  * Avoid incorrect web output if not in quiet mode
  * Include artwork in distribution file</changelog>
  <changelog author="Matthias Brugger &lt;mbrugger@suse.com&gt;" date="1729857600">- Update to 4.12
  * mention /etc/sispmctl/password in manpage
  * add favicon.ico
  * on USB retry always use the original control data</changelog>
</package>
</otherdata>